BROSA Tenerife Outdoor 2 x Dining Chair User manual

ASSEMBLY GUIDE
Tenerife Outdoor 2 x Dining Chair
v2.0

Components
Upon unpacking your chairs from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new chairs.
Chair body x 2 Leg frame x 2
Seat cushion x 2
Back cushion x 2
Hardware
What you need
A x 8
(Spec: M8 x 30mm) (Spec: M8mm) (Spec: M8mm) (Spec: 6#)
B x 8 C x 8 D x 1
12
3
4

Step 1
A x 4
B x 4
C x 4
D x 1
Align the leg frame (2) to the underside of the chair
body (1) so that the screw holes are overlapping. Fit
a spring washer (C) to a bolt (A) followed by a at
washer (B) and screw into a hole using the allen key
(D). Repeat for the other three holes.
Step 2 Place the seat cushion (3) into chair body (1).
A
B
C
D
1
2
3

Step 3 Place the back cushion (4) into place. is is one
dining chair complete. Repeat the whole process to
assemble the other dining chair. en enjoy your
new outdoor dining chairs!
4