BROSA Elizabeth User manual

v1.0
ASSEMBLY GUIDE
Elizabeth Glass Top Dining Table

Components
Upon unpacking your dining table from its delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new dining table.
Table top x 1
Stretcher x 1
Leg x 2
Hardware
What you need
C x 4
Spec:
A x 4
Spec: Ø10 x 48.5mm
B x 4
Spec: M10 x 10mm
D x 1
Spec: M5

Step 1 Insert a steel dowel (A) into both holes in the leg (2)
making sure they are facing the correct direction when
in place. Repeat for the other leg (2).
A x 4
Step 2 Align a leg (2) to the stretcher (3) tting them together
and repeat for the other leg (2). Insert a grub screw (B)
into a hole and use the allen key (D) to tighten. Repeat
for the remaining grub screws (B).
B x 4
D x 1
D
D

Step 3 Remove the paper to reveal the adhesive side of the
glass support (C) and stick it on the top of the leg
structure formed in Step 2 as shown. Repeat for the
remaining glass supports (C).
Step 4 With another person, gently lower the table top (1) on
top of the leg structure. Enjoy your new dining table!
C x 4