BROSA Field Extendable Dining Table User manual

ASSEMBLY GUIDE
Field Extendable Dining Table
v1.0

Components
D x 12
(Short Bolt)
D x 1
(Allen key)
C x 8
(Long Bolt)
Hardware
What you need
Leg x 2
Table top x 1
Extension
Leaf x 1
Storage
Bag x 1
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit www.brosa.com.au/pages/product-return-and-parts-request
and we’ll sort it out right away.
B x 8
(Cross Dowel)
4
3
2
1

Step 1.1
Step 1.2
Step 1.3
Step 1.3
Step 1.4
Step 1.5
Step 1.6
Step 1 1.1 Make sure that the lock is in horizontal position
and slide two parts of the table top apart.
1.2 Insert cross dowels (B) into the side holes on the
table top (2). Ensure that the dowel’s holes are facing
towards the bolt entrances.
1.3 Insert the legs (2) into the opening under the table
top so that the bolt holes are overlaping.
1.4 Secure the legs with stretchers using long bolts (C)
and an allen key (D).
1.5 Secure the legs with table top using short bolts (A)
and an allen key (D).
1.6 Slide two parts of the table top back together.
Turn the lock up and gently lift the table to place
upright on a level surface.
C
A
2
B
2
1
C
D
A x 12
C x 8
D x 1
B x 8

Step 2 To extend the table, take the extension leaf (3) out of
the storage bag (4).
Step 3 Unlock the switch under the table top and slide two
parts apart.
4
3
3

Step 4 Insert the extension leaf into the formed space.
make sure the dowels are aligned correctly. Slide the
extension leaf towards one of the table top sides.
Slide the remaining side of the table top towards the
extension leaf and x the lock back.
3

Step 5 To switch back to the compact form unlock the
swith underneath the table top. Slide the sides apart
from each other. Take the separated extension leaf
out.
Step 6 Place the extension leaf back into the storage bag
and close it.
4
4
3
3
3

Step 7 Hide the bag into the table top and close it.
Switch the lock back on.
4
4

Step 8 Enjoy your new table!