BROSA Smeaton Small Outdoor Dining Table User manual

ASSEMBLY GUIDE
Smeaton Small Outdoor Dining Table
v1.0

Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit
www.brosa.com.au/pages/product-return-and-parts-request and we’ll sort it
out right away.
Table Top x 1
Leg x 3
Supporting Frame x 1
Hardware
What you need
A x 13
(M6 x 15)
B x 10 C x 1
(M4)
12
3

Step 1 Position a leg (3) upon the supporting frame (2) as
shown in below diagram. Make sure the bolt holes
overlap. Fit a washer (B) into a bolt (A) and then
insert the bolt into a hole. Secure the bolt with the
Allen key (C) but do not tighten it yet. Repeat this for
the other hole.
A x 2
B x 2
C x 1
2
3
A
B
C

Step 2 Position another leg (3) upon the supporting frame.
Make it crossed with the rst leg as shown in below
diagram so that the bracket attached to the second
leg overlaps the hole on the rst leg.
Fit a washer (B) into a bolt (A) and then insert the
bolt into a hole on the supporting frame. Secure the
bolt with the Allen key (C) but do not tighten it yet.
Repeat this for the other hole.
Insert a bolt (A) into the bracket which connects
these two legs and secure the bolt with the Allen key
(C) but do not tighten it yet.
A x 3
B x 2
C x 1
A
B
C
A
C
3

Step 3 Position the third leg (3) upon the supporting frame.
Make it crossed with the other two legs as shown in
below diagram so that bracket attached to one leg
overlaps hole on the other leg.
Fit a washer (B) into a bolt (A) and then insert the
bolt into a hole on the supporting frame. Secure the
bolt with the Allen key (C) but do not tighten it yet.
Repeat this for the other hole.
Insert a bolt (A) into a bracket connecting two legs.
Secure the bolt with the Allen key (C) but do not
tighten it yet. Repeat this for the other bracket.
A x 4
B x 2
C x 1
A
B
C
A
C
3

Step 4 Align the formed structure with the table top (1).
Make sure the bolt holes overlap. Fit a washer (B)
into a bolt (A) and then insert the bolt into a hole.
Secure the bolt with the Allen key (C) but do not
tighten it yet. Repeat this for the remaining holes.
A x 4
B x 4
C x 1
C
AB
1

Step 5 Tighten all bolts with the Allen key (C).
C x 1
C
C

Step 6 Place the dining table upright on a level surface and
then enjoy your new outdoor round dining table!