BROSA Hans 215cm Dining Table User manual

ASSEMBLY GUIDE
Hans 215cm Dining Table
v1.0

Components
Upon unpacking your table from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new table.
Leg x 4
Table body x 1
A x 4
(Cross Dowel)
B x 8
(Threaded Bolt)
C x 4
(Washer)
D x 4
(Lock Washer)
E x 4
(Hex Nut)
F x 1
(Spanner)
Hardware
What you need

Step 1 Insert the cross dowel (A) into the top hole of the leg
so that the side marker faces the bolt hole. Repeat
for all four legs.
Step 2 Screw two threaded bolts (B) into the corner holes.
Repeat for all four legs.
A x 4
B x 8
A
B
B

Step 3 Place the table top on a at surface with underside
facing up. Insert a leg construction formed in previ-
ous steps into a corner opening. Fit a washer (C), a
lock washer (D) then a hex nut (E) to the threaded
bold and tighten with the spanner (F). Repeat to
secure the second bolt. Repeat for the remaining
legs.
C x 8
D x 8
E x 8
F x 1
CD
EF

Step 4 Place the table on a at surface and enjoy your new
table!