Bticino LIVING NOW 3584C User manual

Cat. Nos): 3584C
Technical data sheet: F02732EN/00 Updated: Created: 25/07/2018
1/2
Viale Borri, 231 - 21100 VARESE - Italy
www.bticino.com
Connected lighting micromodule
5. OPERATION
6. TECHNICAL CHARACTERISTICS
6.1 Mechanical characteristics
Protection against impacts: IK 04
Protection against solid bodies/liquids: IP 20
6.2 Material characteristics
Polycarbonate
Self-extinguishing:
+ 850°C/30 s for insulating parts holding live parts in place.
+ 650°C/30 s for the other insulating components.
6.3 Electrical characteristics
ZigBee radio technology frequency 2.4 GHz to 2.4835 GHz
Power level: < 100 mW
Wireless mesh network, self-adaptive and secure (AES 128), conforming
to standard IEEE 802.15.4 (LR-WPAN)
5terminals: 1 auxiliary input
1 phase cut
1 phase
2 neutral
Consumption: - operation: 0.5 W
- standby: 0.2 W
Voltage: 100/240 V~
Frequency: 50/60 Hz
1. USE
The connected lighting micromodule allows to control lights locally or
remotely. It is compatible with all loads with max power 300W. It can be
connected to one or more traditional push-button or associated with
"wireless light switches".
It is installed as a traditional rele in the box (behind the button) or in
derivation boxes.
Caution: Must be connected to the neutral.
Power supply 100/240 Vac.
Terminal type: screw
Terminal capacity: 1 x 2.5 mm
2
- 2 x 1.5 mm
2
Stripping length: 6 mm
3 mm flat screwdriver
Designation Cat. Nos.
Connected micromodule with 1 ON/OFF circuit
Lighting micromodule switch up to 300 W.
Equipped with an LED indicator (conguration) and a
RESET button (hidden) used to return to factory set-
tings.
3584C
A B C D Ø E
40 40 20 52 3
Ø E
A
D
BC
L
NN
ON
OFF RESET button used to return to factory settings
LED indicator:
- useful during installation for configuration
ON/OFF button
2. RANGE
3. DIMENSIONS (mm)
4. CONNECTION

2/2
Cat. No(s): 3584C
Technical data sheet: F02732EN/00 Updated: Created: 25/07/2018
Connected lighting micromodule
6. TECHNICAL CHARACTERISTICS (continued)
6.3 Electrical characteristics (continued)
Table of loads
(*)
Or 10 lamps max. For comfortable lighting, we recommend using bulbs of the
same type and make.
(**)The ferromagnetic transformers must be charged to more than 60% of their
power. When calculating the permissible power, the ferromagnetic transformer
efficiency must be taken into account. A load must be connected before
programming and using the product.
6.4 Climate characteristics
Usage temperature: +5°C to +45°C
Storage temperature: 0°C to +45°C
7. CARE
Clean the surface with a cloth.
Do not use acetone, tar-removing cleaning agents or trichloroethylene.
8. STANDARDS AND APPROVALS
The undersigned, BTICINO, declares that the radio-electric equipment
type (3584C) complies with directive 2014/53/EU.
The full text of the EU declaration of conformity is available on the
following website: www.bticino.it/red
Caution: Always test before using special cleaning products.
R L
LED **
240 V~ Max. 300 W (*)100 W 250 W 250 VA 250 VA
100 V~ Max. 150 W (*)50 W 125 W 125 VA 125 VA