Bticino Sfera 352500 Operating manual

User and installation manual
www.bticino.com
Sfera Display Module
352500

Sfera Display Module
User and installation manual

3
Contents
Sfera Display Module
User and installation manual
General information 4
Warnings and recommendations 5
Regulatory warnings 5
Front view 6
Back view 7
Installation 8
Mounting 8
Disassembling 12
Configuration using the keypad 14
Access to the Settings menu 14
Configuration 15
Password 15
Address Book format 16
Language 17
Multiple Call 17
Tune setup 18
Screen 18
LCD Setup 21
Brightness - Contrast 21
ECO Mode 21
Riser base address 22
Door codes 22
Set n. digit 22
Set 23
Cancel 23
Address book – Alphanumeric mode 24
Enter 25
Modify 26
Delete contact 26
Delete all 27
Address book – Numeric BFA mode 28
Modify 29
Enter 30
Delete contact 31
Delete all 31
Configuration using the software 32
The TiSferaDesign software 32
Connection to the PC 32
Using the display module 33
Alphanumeric mode call 33
Numeric BFA mode call 34
Keypad module call 35

4
Sfera Display Module
User and installation manual
General information
The Sfera Display Module must be used only on BTicino 2 wires digital systems, paired with the
audio or video speaker modules.
Devices of the BTicino Sfera series require attractive/functional finishes; BTicino proposes the Sfera
New line in 3 colours and the Robur anti-vandal line.
Sfera New 352501/02/03 front cover
Sfera Robur 352505 front cover

54
Sfera Display Module
User and installation manual
Warnings and recommendations
It is important to read this manual carefully before proceeding with the installation.
The warranty becomes automatically void in case of negligence, improper use, tampering by
unauthorised personnel.
Regulatory warnings
Read carefully before use and keep for future reference
Touching the units with wet hands is forbidden
Using liquid cleaners or aerosols is forbidden
Blocking the ventilation openings is forbidden
Modifying the devices is forbidden
Removing protective parts from the devices is forbidden
Installing the units near liquids and powders is forbidden
Installing the units near heat sources is forbidden
Installing the units near harmful gases, metal dusts or similar is forbidden
Fastening the units on unsuitable surfaces is forbidden
Risk of devices falling because the surface on which they are installed collapses
or inappropriate installation
Switch the power supply OFF before any work on the system
Caution: Installation, configuration, starting-up and maintenance must be
performed exclusively by qualified personnel.
Check that the wall installation has been carried out correctly
Lay out the wires respecting the standards in force
Connect the power supply wires as indicated
Use only the items indicated in the technical specifications for any system
expansions

6
Sfera Display Module
User and installation manual
3
4
5
6
1 2
1. Graphic display
2. Mini_USB connector for configuration using
the software (recommended), residents’
address book programming, and firmware
update
3. Residents names scroll pushbutton
4. Residents names scroll pushbutton
5. Confirmation pushbutton
– call forwarding OK
6. Quick scroll pushbutton
Front view

76
Sfera Display Module
User and installation manual
2
1
Back view
1. Connector for the connection to
subsequent modules
2. Connector for the connection to previous
modules

8
Sfera Display Module
User and installation manual
1
2
3
Installation
Caution: installation, configuration, starting-up and maintenance must be performed
exclusively by qualified personnel.
Mounting

98
Sfera Display Module
User and installation manual
4
3
3

10
Sfera Display Module
User and installation manual
5
6