Bticino KW8013 Operating manual

User and installation manual
www.bticino.com
Alexa Voice Control
KW8013 - KG8013 - KM8013

Alexa Voice Control
User and installation manual

3
Contents
Alexa Voice Control
User and installation manual
General information 4
Warnings and recommendations 4
Regulatory warnings 5
Fundamental concepts 6
Front view 7
Function keys and status LEDs 7
Installation 10
Recommended installation height 10
Installation in MyHOME_Up system 10
Installation in SCS MyHome system with additional power supply, item K8003. 12
Alexa Voice Control configuration 15
Introduction 15
Accessing the App using the Legrand account 16
Authentication 18
Forgotten password 18
Associate Alexa Voice Control 20
Manage the Alexa Voice Control 26
Home page 26
Device reset 29
Menu 30
Use of Alexa Voice Control 31
Alexa functions and connected control 31
Reset your Alexa Voice Control 34
Configuration of capacitive keys 35
Configuration with MyHOME_Up 36
Connection to the system 37
Alexa Voice Control key configuration 40
Configuration with MyHOME_Suite 51
Configuration of the Alexa Voice Control 52
Use of capacitive keys 54
Cyclical ON/OFF light control 54
Light control only OFF 55
Pushbutton type light control (PUL) 55
Timed light control 56

4
Alexa Voice Control
User and installation manual
General information
Warnings and recommendations
Wi-Fi technical features
The Alexa Voice Control must be connected to a Wi-Fi network with the following features:
Smartphone technical features
– IEEE 802.11 b/g/n (2,4 GHz) 13 channels
– Encrypting and authentication methods supported:
– OPEN WPA-PSK networks
– TKIP WPA2-PSK included
– AES WEP 64 bits (ASCII 5 figure or hexadecimal 10 figure codes) included
– WEP 128 bits (ASCII 13 figure or hexadecimal 26 figure codes)
– WPS authentication (supported for WPA2-PSK)
– Bluethoot 4.2
– Android 5.1
– iOs 12
It is important to read this manual carefully before proceeding with the installation.
The warranty becomes automatically void in case of negligence, improper use, tampering by
unauthorised personnel.
The Alexa Voice Control must only be installed indoors; it must not be exposed to water drops or
splashes; it must be used only on BTicino systems.
Note: a domestic Wi-Fi with Internet access is needed for the connection between Alexa Voice Control
and the smartphone.
To use the service, the Customer must acquire the technical equipment which allows access to the
Internet, on the basis of an agreement made by the Customer himself with an ISP (Internet Service
Provider). BTicino plays no part in this.
The communication between Alexa Voice Control and the App can be affected by:
– a) quality of the Wi-Fi signal;
– b) type of access contract to the home internet;
– d) configuration of the router.
When one of these 3 elements does not conform with the specifications required for product operation,
BTicino accepts no responsibility for any faults.
We would like to inform you that the service provided by BTicino by means of remote use via the app
involves the use of data. The cost linked to data usage depends on the type of contract which the
customer has with his ISP (Internet Service Provider) and is solely the customer’s responsibility.

54
Alexa Voice Control
User and installation manual
Regulatory warnings
Read carefully before use and keep for future reference
Touching the units with wet hands is forbidden
Using liquid cleaners or aerosols is forbidden
Blocking the ventilation openings is forbidden
Modifying the devices is forbidden
Removing protective parts from the devices is forbidden
Installing the units near liquids and powders is forbidden
Installing the units near heat sources is forbidden
Installing the units near harmful gases, metal dusts or similar is forbidden
Fastening the units on unsuitable surfaces is forbidden
Danger of electrical shock
Risk of devices falling because the surface on which they are installed collapses
or inappropriate installation
Switch the power supply OFF before any work on the system
Caution: Installation, configuration, starting-up and maintenance must be
performed exclusively by qualified personnel.
Check that the wall installation has been carried out correctly
Lay out the wires respecting the standards in force
Connect the power supply wires as indicated
Use only the items indicated in the technical specifications for any system
expansions

6
Alexa Voice Control
User and installation manual
Note: for the creation and management of several homes and groups, see the specific Amazon Alexa
documentation
Fundamental concepts
In order to take advantage of the connected functions of Alexa Voice Control, the following is
required:
– An active Legrand account including your homes with the Legrand connected devices inside.
– An Amazon account, to add your Alexa Voice Control and place it in a home.
MAIN HOME HOLIDAY HOME
MAIN HOME HOLIDAY HOME
LEGRAND ACCOUNT
AMAZON ACCOUNT

76
Alexa Voice Control
User and installation manual
1. Microphone
2. Alexa Voice Control status LED
3. Function Keys
4. Speaker
5. Configurable capacitive key and LED (see Configuration of capacitive keys)
Front view
Function keys and status LEDs
Function keys
Multifunction key
Manually activates Alexa Voice Control and when used with
the + key performs a reset
"Mute” key Audio disabled
Volume keys Increase/decrease the volume
1 11 4 12 3 3
55
3

8
Alexa Voice Control
User and installation manual
Key status LED
MODULE A MODULE B STATUS
Module A = no configured control
Module B = no configured control
Module A = 1 configured control
Module B = no configured control
Module A = 2 configured controls
Module B = 1 configured control
Module A = 2 configured controls and one
light on
Module B = 1 configured control and one light
on

98
Alexa Voice Control
User and installation manual
Alexa Voice Control status LED
LED COLOUR FUNCTION DESCRIPTION
LIGHT BLUE
AND
BLUE
MAIN STATUS
Alexa Voice Control
is communicating
to the user the main
communication
statuses (listening,
processing, answer)
Listening status The LED on indicates that Alexa
Voice Control is“listening”to a
request of the user, either a voice
request or else (Wake Word, Tap-
to-talk, or Push-to-talk)
Processing status The LED on indicates that the user
has made the request and Alexa
Voice Control is processing it and
will answer soon
Answer status The LED on indicates that Alexa
Voice Control is answering
verbally.
WARNINGS Alexa Voice Control warns the user in case of new
alarms, timers and memos
START Alexa Voice Control informs the user that it is starting
BLUE NOTIFICATION Alexa Voice Control has received and is playing back a
voice message from Alexa App
RED
MICROPHONE OFF Alexa Voice Control does not detect the Wake Word
ERRORS
Following a request of the user, the LED coming on
indicates that an error (system error, Alexa service not
available, Wi-Fi not available) is preventing Alexa Voice
Control from answering.
YELLOW COMMUNICATION:
messages
Flashing yellow light:
you have a pending message or notification. Say “Play
my messages” or “What notifications do I have?”(Use the
Do Not Disturb function in the Alexa App to disable)
WHITE DEVICE
MODIFICATIONS
The LED on indicates that the Alexa Voice Control status
has been changed: for example, the volume has been
changed or has been disabled, or is off
ORANGE CONFIGURATION The device is ready to be configured.
PURPLE DO NOT DISTURB
The LED on indicates that the Do Not Disturb (DND)
function of the Voice Control is active.
DND stops all incoming communications (notifications
and messages).

10
Alexa Voice Control
User and installation manual
Installation
Recommended installation height
Installation in MyHOME_Up system
Height recommended, unless otherwise required by the law
Note: vertical installation only.
For optimum operation do not install behind other items (e.g. vases, furniture).
An additional power supply, item K8003, can be used if the system maximum absorption limit is reached.
80/100 cm
F430R3V10F411U2
230 Vac
ON
OFF
E46ADCN
MyHOMEServer1
LN4691
KW/KG/KM8013
L4652/2
BUS
RJ 45
Home Wi-Fi Router
DEVICE ID:
0000000
INSTALLERCODE:
00000000
MODE
+
–
FAN