Burtonsafes FIRESEC 4/60 User manual

ABOUT FIRESEC 4/60











OPENING THE SAFE:

lI



m

· l1



INCORRECT ENTRY:

 








CHANGING THE PRIMARY CODE:


• Press on
• Press enter
•Enter 1
• Press enter
•Enter existing code [1 ][2][3][4][5][6]
• Press enter
•Enter new 6 digit code followed by enter
•Enter new code for a second time and press enter to
confirm


      
FIRESEC 4/60 ELECTRONIC
LOCK MODEL: FIRESEC 4/60

 C 

     
ADDING/CHANGING THE SECONDARY CODE (USING THE PRIMARY CODE):








CHANGING THE SECONDARY CODE (USING THE SECONDARY CODE):








DELETING THE SECONDARY CODE (USING THE PRIMARY CODE):


 0
 Press Enter
 Enter the current primary code followed by Enter

USER INSTRUCTIONS
LOCKING:
• Turn the bar handle counter clockwise until stop position is reached
CURRENT SUPP I BATTERY CHA NGE:
A series of beeps indicates that the battery is weak and must be replaced. Only use 9V ALKALINE -batteries!
Burton Safes recommends .......... . ., ALKALINE BATTERY
Press the catch on the top edge of the battery cover with a screwdriver and lever o the battery lid. Pull the battery
out carefully until the battery clip is visible. Release the battery from the clip and replace. Re-engage the lid. Please
ensure that the cable is not damaged.
     
EMERGENCY POWER SUPPLY:
If the safe has run out battery please follow these instructions :
 H  9V  D 
+  & 

 While keeping contact at all times with the
battery press "On" and enter your current code
then enter to access the safe
 Once ins ide please follow the above instructions
on how to change your battery