Burtonsafes HOTEL POP UP User manual

USER INSTRUCTIONS - HOTEL POP UP LOCK
How to open the safe for the first time
ABOUT THE LOCK
This lock requires a 4-6 digit code to open.
Guests/Users can choose their own code and
a master code can be programmed.
The lock also features an emergency key.
• Enter the code ‘000000’ (factory default master code)
• Open the safe door
How to close the safe
• Close the safe door
• Enter your chosen code (must be 4-6 digits long)
• Press the [LOCK] key
How to open the safe
• Enter your 4-6 digit code
• Open the safe door
How to change the code
• Enter your code and open the safe door
• Follow the instructions for ‘How to close the safe’
Incorrect entry
If an incorrect code is entered the bolts will not retract, try your code
again. After 4 incorrect entries, the screen will display ‘ERROR’ and then
‘HOLD15’. The lock will be disabled for 15 minutes. You can’t enter a
code again until the 15 minutes is up. You can open the safe with the
emergency key durig the 15 minutes.

13
How to set/change the master code
The master code can open the safe if the user code is forgotten.
• Press key [0] twice followed by the [LOCK] key
• The screen will display ‘OLD’
• Enter your current master code (‘000000’ factory default)
• Press the [LOCK] key, the screen will display ‘NEW’
• Enter a new 6-digit master code followed by the [LOCK] key
• The screen will display ‘AGAIN’. Re-enter your new 6-digit master code
• Press the [LOCK] key, the screen will display ‘DONE’
To open the safe with the master code:
• Enter your 6-digit master code
• Open the safe door
How to open the safe with the emergency key
• Remove the plastic cover labeled ‘Technosafe’
• Insert the emergency key and turn it clockwise.
The screen will display ‘MANUAL’
• Turn the key anti-clockwise and then remove it
• Press the [LOCK] key and the bolts will retract
• Open the safe door
• Replace the plastic cover
Current supply / battery change
To check the battery power press the [L] key. ‘HI-BAT’ will display for a
high battery and ‘LO-BAT’ will display for a low battery.
If the battery is low the screen will automatically display ‘BA-LO’. Replace
the battery if you see this message. This lock takes AA batteries.
Burton Safes recommends the Duracell brand.