CAS ER JR series User manual

`
2

3
CONTENTS
PRECAUTIONS............................................................ 4
PREFACE....................................................................... 6
OVERALL VIEW........................................................... 6
DISPLAY & KEYBOARD........................................... 7
OPERATIONS............................................................... 9
Chapter 1. Basic Operation........................................ 10
Chapter 2. PLU Saving & Calling - up....................... 12
Chapter 3. User's Set-up Mode..................................14
Chapter4. Formatting Printing Receipt...................17
Chapter 5. Sales Transaction.....................................21
Chapter6. EURO Setting Method(Option)..............26
ERROR MESSAGES.................................................29
ASCII Code................................................................... 30
SPECIFICATION..........................................................31

`
4
PRECAUTIONS

5

`
6
PREFACE
Thank you for purchasing your CAS ER JR scale.
CAS scales are designed and produced under rigid quality control to deliver
outstanding performance, reliability and long life.
This manual will help you with the proper operation and care of yournewCAS ER JR.
Please review the ER JR scale manual before you use the scale and keep it handy
for future reference.
OVERALLVIEW
STANDARDTYPE
POLETYPE

7
DISPLAY&KEYBOARD
Front Display
Rear Display
KEYBOARD

`
8
■ Table : Key Functions
KEYS
FUNCTIONS
0 ~ 9
Numbersimport
M1 ~ M4
DirectPLU keys
Function key, PLU restore, Push more than 2 second when using
PLU Restoremodeorfinalizesalestransaction
Tomakeseveralsalestransactionbyadding up
Tocleardata
Toset zero
Toset uporcleartare value
Toturn on/off thescale orbacklight
■ Table : Symbols on Display
SYMBOL
DESCRIPTION
Weightsteady
Toadjust zero
Tareon
Backlight on
Lowpowerwarning
Used tocall atotalpriceof addup transactions
Chargestatus

9
OPERATIONS
Programming Mode
Chapter 1. Basic Operation
a.To turn on/offscale
b.To turn on/off backlight
c.Zero function
d.Tare function
- One time tare
- Successive tare
Chapter 2. PLU Saving & Calling-up
a.Saving unit priceon PLU
b.Saving PLU name (option)
c.Calling up PLU
Chapter 3. User' s Set-up Mode
a.Auto power - off
b.Backlight ON/OFF function
c.Brightness function
d.Low battery backlight auto off function
e. Selecting the printer
Chapter4.FormattingPrintingReceipt
a. Using Printer
b. Receipt headersetting
c. Receipt currency(unit)setting
d. Receipt datesetting
Sales mode
Chapter 5. Sales transaction
a.Input the unitprice through the numberkey
b.Input the unitprice through calling up the PLU
c.Add up the total amount
d.Inspect or clearthetotal amount
Chapter 6. EURO Setting Method (Option)
a.Saving EURO rate
b.Switching currency

`
10
Chapter 1. Basic Operation
a. To turn on/off the scale
①PresstheON/OFF keytoturn on.
②PresstheON/OFFkeyfor afew
seconds toturn off.
b. To turn on/off the backlight
①PressON/OFFkeyfor afewseconds
underthepoweron.
②PressON/OFF keyagainunderthe
backlighton.
c. Zero function
①PressZEROkeytoset Zero

11
d. Tare function
Tare means the weight ofcontainer.Youmay use tare function when you weigh
anitem with container and measureonlythe weight ofitem.
■One time tare
①Placeacontainerontheplatter.
EX)200gof tare.
②Press TAREkey toset zero point.
EX)200gof tare.
■Successive tare
③Placeanothercontaineronthe
platter. EX) 100g of tare.
④Press TAREkey toset zero point.
⑤Afterweighingitem remove allof the
containerfrom the platter.
⑥Press TAREkey againtoset zero.

`
12
Chapter 2. PLU Saving & Calling-up
a. Saving unit price on PLU
ThissectionexplainshowtosaveunitpriceinPLU.
Number of PLU
Range
Remarks
PLU name
4
1~4
①Press numberkey toinput unit price
youwishtohave.EX)1.99
②Press “ ” key for a fewseconds to
enterthePLU's statecanbepre-establish
③PressPLUkey(M1~M4) toinput a
directPLUaddress.
Ex)

13
b. Saving PLUname (Option)
Ckey is to input,save acharacter, and movetonext character (or byte).
TAREkey is to move next programmingmenu.
①Input appropriateASCII codes tosave
thePLU name.
Ex) “APPLE” is “4, 1, C, 5, 0, C, 5, 0,
C, 4, C(alphabet), C, 4, 5, C”.
②Press TAREkeytoexittonormal
weighingmodeor Ckey up tomaximum
8thbyte. Then automaticallyexitto
normal weighingmode.
c. Calling up PLU
①PressM1 ~ M4 keytocallup
PLU. e,g, PressM1 key.
②PressCkeytoclear andreturntothe
normal weighingmode.

`
14
Chapter 3. User’s Set-up Mode
This section explains how to set up the following functions.
Functions
Options
Remarks
a. Auto power-off
NO/10/30/60
b. Backlight ON/OFF
OFF/ON/3/5/10
c. Brightness function
1 ~ 7
Default3
d. Low battery backlight auto off
OFF/ON
e. Printer selection
NON/DEP-50/DLP-50
PressZERO keytosave current optionandmovetonextfunction setting mode.
Press TAREkey tomovetoothernext option.
a.Auto power-off
This section explains how to set backlight on & off function and automatic off function.
Options
Description
Remarks
NO
No auto power-off.
10 (minutes)
Auto power-off in 10 minutes when no use.
30 (minutes)
Auto power-off in 30 minutes when no use.
60 (minutes)
Auto power-off in 60 minutes when no use.
①To get into “User’s Set-up Mode” press
ON/OFFkeypressingandholdingZEROkey.
①Selectanoptionyouwishtohavebyusing
TAREkey.Ex)30(minutes).
.

15
b. Backlight ON/OFF function
This section explains how to set backlight on & off function and automatic off
function.
Options
Description
Remarks
OFF
Backlight always off
ON
Backlight always on
3(Seconds)
Automatic backlight-off when not in usefor3 seconds.
5(Seconds)
Automatic backlight-off when not in usefor5 seconds.
10 (Seconds)
Automatic backlight-off when not in usefor10seconds.
①PressZEROkeytomovenextfunction
setting,backlightON/OFF.
②UseTAREkeytoselectoneofbacklight
autopower-offoptionorbacklightON/OFF.
Ex)Select5secondsautopower-offoption.
c. Brightness function
This section explains how to set brightness level (1 ~ 7)
③PressZEROkeytomovenextfunction
setting,backlightbrightness.
④PressTAREkeytoselectbrightness
(1~7).

`
16
d.Low batterybacklight auto off function
This section explains how to set Backlight Auto Off. If the scale uses
backlight Auto Off function, it will turn off when low battery indicator occurs
①PressZEROkeytomovenextfunctionsetting,
lowbatterybacklightautooff..
②PressTAREkeytoselectbacklighton/off.
e. Selecting the printer
This section explains how to select the printer option when you'd like to use
the
printer connected to ER JR.
Options
Description
Remarks
NON
No printerinuse
DEP-50
DEP-50 printerinterface
DLP-50
DLP-50printerinterface
①PressZEROkeytomovenextfunctionsetting,
selectingtheprinter.
②Select the printer you’re using with
ERJR bypressingTAREkey.EX)DEP-50

17
Chapter4.FormattingPrintingReceipt
This chapter explains how to set the receipt format in the following fields.
Options
Description
Remarks
HEADER
To input characters you wish to have on
thereceiptheader.
Maximum1,2line/24characters,
3line/16charactersforeachline
UNIT
To input currency symbol or characters
youwishtohaveonthereceipt.
Maximum8characters
DATE
Toinputdateonthereceipt.
a.UsingPrinter
Please connect your printer to RS-232C port, which is located at the gray part
on the picture, using RS-232C cable.

`
18
b.Receiptheadersetting
Options
Description
Remarks
HEADER
Toinputcharactersyouwishtohave
onthereceiptheader.
Maximum1,2line/24characters,
3line/16charactersforeachline
User may input the name of store, telephone number, or other expressions
he/she wishes to have on the receipt.
①HolddownCkeyandpressON/OFF
key under the scale power off. “O1” on the
“Unit Price” display represents that you are
readytoinputthefirstcharacter.
②InputappropriateASCIIcodes(pageon30)
youwishtohave.Ex)CAS.
③Tosaveitandgonextheaderlinepress
TAREkey.
④UsingASCIIcodeyoucaninputappropriate
dataonHeader2.
Ex)820-1111,telephone#.

19
⑤Tosaveitandgonextheaderlinepress
TAREkey.
⑥UsingASCIIcodeyoucaninput
appropriate dataon Header 3.
Ex)THANKYOU
c.Receiptcurrency(unit)setting
①Initialcurrency(unit)displaystatus.
②UsingASCIIcodeyoucaninputappropriate
characterorcurrencysymbolsonUNIT.
Ex)$
d.Receiptdatesetting
①To save it and go to “Initial DATE display”
statuspressTAREkey.
②Justinputappropriatemonthyouwishto
have,notusingASCIIcode.
Ex)12(December)

`
20
③PressCkey to go to next “DAY” setting.
④Justinputappropriatedayyouwishto
have,notusingASCIIcode.
Ex)12thday
⑤PressCkey to go to next “YEAR” setting.
⑥Justinputappropriateyearyouwishto
have,notusingASCIIcode.
Ex)Year2008
•If you press Cor T(TARE) key you can automatically go to normal
weighing mode.

21
Chapter 5. Sales transaction
ER JR can provide inputting the unit price through the numeric key and calling up
PLU.
a. Input the unit price through the numeric key
This section explains how to inputthe unitprice through the numerickey
and complete the sales transaction.
①Placeanitem on the platter and
pressappropriatenumeric keystoinput
unit price. EX) 1.99for unit price.
②If you press key add this
transaction to daily total amount and
number of sales data.,Unit-price & total-
pricewindowisclear.
※if the scaleis connected printer,
sale transaction data will printed out.
③Remove the item from the platter.