CAS PR Plus-B User manual

1
표지

`
2
CONTENTS
PRECAUTIONS........................................................3
PREFACE, OVERALL VIEW ...............................5
DISPLAY AND KEY BOARD ................................6
REMOVE THE SCREW.........................................9
COLUMN INSTALLATION ..................................9
OPERATION
Chapter 1. Basic Operation................................10
Chapter 2. PLU Saving & Calling-up ..............13
Chapter 3. User' s Set-up Mode ........................15
Chapter 4. Sales transaction ..............................17
TECHNICAL PARAMETER ...............................19
ERROR MESSAGE................................................19

3
PRECAUTIONS

`
PRECAUTIONS
4

5
PREFACE
Thank you for purchasing CAS PR PLUS
These series have been designed with CAS reliability, under rigid quality control and with
outstanding performance. Your special departments can enjoy these high quality reliable
CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the PR PLUS
Please keep it handy for future reference.
OVERALL VIEW

`
6
DISPLAY AND KEY BOARD
■PRPLUS-B Front display
■PRPLUS-B Rear display
■PRPLUS-P Front cover

■PRPLUS-P display
■key
7

`
■Function keys
KEYS FUNCTIONS
Used to enter all the numeric data.
PLU key.
Used to power on& off the scale.
Used to clear all the numeric price display.
Used to clear sum total price.
Used to clear all the daily total prices.
Used to correct the zero point.
To set or clear tare value.
PLU save key.
Display battery voltage %(push more than 2second)
Used to enter the decimal point when price is entered.
8

9
REMOVE THE SCREW
Remove the crew
NOTICE：Make sure to remove the screw before use at the first time.
COLUMN INSTALLATION
Column
Column Support
Screw
Figure one Figure two
Column Installation

`
10
OPERATION
Chapter 1. Basic Operation
a. To turn on/off the scale
①Press the ON/OFF key to turn on. ②Press the ON/OFF key for a few
seconds to turn off.
b. Zero function
①Press ZERO key to set Zero

11
c. Tare function
Tare means the weight of container. You may use tare function when you weigh
an item with container and measure only the weight of item.
■One time tare
①Place a container on the platter.
EX) 200g of tare.
②Press TARE key to set zero point.
EX) 200g of tare.
■Successive tare
③Place another container on the
platter. EX) 100g of tare.
④Press TARE key to set zero point.

`
12
⑤After weighing item remove all of the
container from the platter.
⑥Press TARE key again to set zero.
NOTE :To remove TARE funtion press“TARE”Key again after removing
the container from the paltter. Automatic tare clearing function may
not be applied to all of PR series.
d. Display battery voltage
1) Press Press “ ” key to check battery voltage left. (push more than 2second)
●It shows percentage of full voltage.
●Please recharge under the 10%.

13
Chapter 2. PLU Saving & Calling-up
a. Saving unit price on PLU
This section explains how to save unit price in PLU.
Number of PLU Range Remarks
PLU
NAME 4 1~4
①Press number key to input unit price
you wish to have. EX)1.99
②Press “ ” key for a few seconds to
enter the PLU 's state can be pre-establish
③Press PLU key (M1 ~M4) to input a
direct PLU address.
Ex)

`
1
b. Saving PLU name (Option)
Ckey is to input, save a character, and move to next character (or byte).
TARE key is to move next programming menu.
Input appropriate ASCII codes to①
save the PLU name.
Ex) “APPLE” is “4, 1, C, 5, 0, C, 5, 0,
C, 4, C(alphabet), C, 4, 5, C”.
②Press TARE key to exit to normal
weighing mode or Ckey up to maximum
8th byte. Then automatically exit to
normal weighing mode.
c. Calling up PLU
①Press M1 ~ M4 key to call up
PLU. e,g, Press M1 key.
②Press Ckey to clear and return to the
normal weighing mode.
4

15
Chapter 3. User’s Set-up Mode
This section explains how to set up the following functions.
Functions Options Remarks
a. Auto power-off NO / 10 / 30 / 60
b. Suspend Mode OFF / 20 / 40 / 60
①To get into “User’s Set-up
Mode”, hold ZERO key and press
ON/OFF key, while the scale is
Press ZERO key to save current option and move to next function setting mode.
Press TARE key to move to other next option.
a. Auto power-off
This section explains how to set backlight on & off function and automatic off function.
Options Description Remarks
NO No auto power-off.
10 (minutes) Auto power-off in 10 minutes when no use.
30 (minutes) Auto power-off in 30 minutes when no use.
60 (minutes) Auto power-off in 60 minutes when no use.
①Select an option you wish to have
by using TARE key. Ex) 30
(minutes).

`
16
b. Suspend mode function
This section explains how to set a time to suspend mode.
Options Description Remarks
OFF No suspend mode.
20 (seconds) Suspend mode in 20 seconds when no use.
40 (seconds) Suspend mode in 40 seconds when no use.
60 (seconds) Suspend mode in 60 seconds when no use.
①Press ZERO key to move next function
setting, suspend mode.
②Press TARE key to select a time to suspend
mode.

1
Chapter 4. Sales transaction
PR can provide inputting the unit price through the numeric key and calling up PLU.
a. Input the unit price through the numeric key
This section explains how to input the unit price through the numeric key
and complete the sales transaction.
①Place an item on the platter and
press appropriate numeric keys to input
unit price. EX) 1.99 for unit price.
②Remove the item from the platter.
7

`
1
b. Input the unit price through calling up PLU
①Press M1~M4 key can call up
the PLU. EX) M1
②Place an item on the platter.
③Remove an item on the platter.
8

19
TECHNICAL PARAMETER
MODEL PRPLUS
CAPACITY(Dual) Max 3/6kg
e=d=1/2g Max 6/15kg e=d=2/5g
Max 15/30kg
e=d=5/10g
DISPLAYS: 6/5/5(Total price / Weight / Unit price)
DISPLAY DESIGNATORS ZERO, TARE, STABLE, AC POWER, BATTERY
MAXIMUM TARE - 2.999kg - 5.998kg - 9.995kg
TEMPERATURE -10 ~ +40℃℃
POWER SOURCE AC 220 - 240V,50 - 60Hz, PB 4V 4Ah
POWER CONSUMPTION APPROX. 4W
PLATTER SIZE(mm) 322W)x212(D)
ERROR MESSAGES
■Table : Error Message
Error
Message
on Display
Description Solution
"Err 0" The "Err 0" occurs when scale is not stable. Remove unstable facts.
"Err 1" The "Err 1" occurs when a current zero point has
shifted from the last span calibration. Please call your CAS dealer.
"Err 3" The "Err 3" is an overload error. Please remove the weight.
"Err 4" The "Err 4" is leakage of payment. Scale needs more payment.
"Err 5" The "Err 5" means there is already tare. Remove the tare.

`
20
MEMO