Cassida Xpecto LiTE User manual

ver.:160218
CASSIDA XPECTO LiTE MIX VALUE COUNTER
USER MANUAL

Cassida Xpecto LiTE MIX value counter
3
This manual contains important information on safety
measures and operational features. Please read it carefully
before operating your value counter, and keep it for future
reference.

Cassida Xpecto LiTE MIX value counter Cassida Xpecto LiTE MIX value counter
1.1 About Cassida Xpecto LiTE
The Xpecto LiTE is a professional, powerful, value counter, with strong
counterfeit detection and high level of performance. It has a
convenient, user-friendly interface, intuitive touch panel, and a variety
of counting modes.
Thank you for choosing the Cassida Xpecto LiTE Mix Value Counter.
5
4
1.2 Box contents
• Power cable
• Cassida Xpecto LiTE
• User manual
• Maintenance kit - Cleaning brush (optional)
INTRODUCTION
moving money forward
Table of contents:
1.3 Xpecto LiTE Overview
1. Introduction
1.1 About Cassida Xpecto LiTE
1.2 Box Contents
1.4 Control Panel
2. Operation
2.2 Loading bills
2.3.2 Sort Mode
1.5 Display
2.1 Getting Started
2.3.3 Count Mode
2.3 Operating Modes
2.3.1 Mix Mode
2.3.4 Face Mode
3. Error Messages
2.3.5 Orientation Mode
2.4 After-count Functions
2.5 Menu
2.3.7 Batch Mode
2.6 Important Safety Notes
2.3.6 Add Mode
2.4.1 Print
4.4 Specifications
4.1 Maintenance
4. Maintenance, Warranty and Specifications
4.3 Shipping
4.2 Warranty
5
5
6
8
8
9
9
10
10
10
11
11
12
12
12
13
13
14
15
16
17
18
19
20

Cassida Xpecto LiTE MIX value counter
7
6
1.3 Xpecto LiTE overview
’+“ USB and Memory Ports (under control panel - not
used)control panel - not used)
ђ. Stacker
Њ. Bill guides
Ќ. Hopper Sensor
Ћ. Hopper
Џ. Control Panel / Touch Display
‘. Stacker Sensor
Front view Rear view
moving money forward
1
2
3
5
4
8
87
7
5
6
1
4
6
2
3

Cassida Xpecto LiTE MIX value counter
9
8
1.4 Control panel
moving money forward
- Touch Screen Shows total count and settings
- PrintPrints the Total Report if a printer is connected
- Batch Opens the batch screen.
- Multi-function These buttons change according to mode or menu setting.
- StartStarts the count (when not in auto-start mode)
- ClearClears the count and / or error
1.5 Display
Main display
1
2
3
11
12
ADD
MENU
TOTALCOUNT
AUTO BATCH
ORIENTFACE
C-SORT
10
20
50
MIX
Xpecto LiTE
BATCH
1
2
3
5
2
6
4
1
2
3
4
5
6
75006
PCS
9000
USD
6
- Mix Button / Icon
- Face Button / Icon
- Add Button / Icon
- Menu Button / Icon
- Total Piece Count Indicator
Total Button / Icon
- Batch Button / Icon
- Orient Button / Icon
- Sort Button / Icon
- Auto / Manual Toggle
- Total Amount Indicator
- Count Button / Icon
1
2
3
4
5
6
7
8
9
10
11
12
4 5
10
8 9
2. OPERATION
2.1 Getting started
Connect the power cable to the port. Before switching on the unit, make sure the hopper is
empty. Using the power switch behind the counter, turn the machine on. The device will
self-test and is ready for operation when the display shows the home screen. Before using
the device, it is recommended to leave the machine turned on for 10-15 minutes (to warm
up the counterfeit detection sensors)
2.1 Powering up and loading bills
2.2 Loading bills
Before loading bills and working on Cassida Xpecto LiTE, the user should check the
counting mode.
It is very important to place the bills into the hopper correctly, because recognition
performance of the bills is highly affected by the arrangement of the bills. Bills should be
placed in a neat stack prior to being placed into the hopper. Avoid counting bills that are
wet, excessively dirty, spoiled, folded, curled or with foreign material like clips, bands, etc.
Bills such as these can cause the machine to malfunction.
Hazardous moving parts!
Do not place fingers, hair, or clothes, etc. near the moving parts.
WARNING
Tips: To reduce rejects
• Place the bills evenly arranged as shown below.
• Adjust bill guides to fit to the size of the bills.
• Correct the bills if they are severely wrinkled or damaged.

Cassida Xpecto LiTE MIX value counter
moving money forward
11
10
2.3 Counting Modes
ADD mode
MIX mode
SORT mode
ORIENT (Orientation) mode
There are 7 counting modes on Xpecto LiTE
BATCH mode
COUNT mode
FACE mode
2.3.1 MIX mode
This mode is available from the home screen by touching the button that corresponds to
the MIX icon, or by touching the MIX icon directly on the touch display.
MIX mode is used to count a stack of mixed denominations. Total number of bills and total
value will be displayed on screen. When operation is complete, you can view a detailed
report by pressing the TOTAL icon on the touch screen, or by pressing the corresponding
button.
MIX
2.3.2 SORT mode
This mode is available from the home screen by touching the button that corresponds to
the SORT icon, or by touching the SORT icon directly on the touch display.
SORT mode allows the user to count and sort bills
by one denomination which is automatically
determined by the first bill scanned in a stack. This
can be useful when you have a large strap of one
denomination, but you want to be sure that there
are no bills of other denominations in the strap.
After the first bill is identified, the machine will stop
every time a bill of a different denomination passes
through the machine. When this occurs, a message
will pop up onscreen with directions for the user to
remove the top bill from the stack and continue
counting.
DENOMINATION ERROR
Remove top bill from stacker.
Not added to count.
Press start to continue.
!
The result of this process is a uniform stack of bills of a single denomination. When
operation is complete, you can view a detailed report by pressing the TOTAL icon on the
touch screen, or by pressing the corresponding button.
2.3.3 COUNT mode
This mode is available from the home screen by touching the button that corresponds to
the COUNT icon, or by touching the COUNT icon directly on the touch display.
COUNT mode allows the user to simply count the total number of bills. It does not
recognize or record the denomination of any bills. During COUNT mode, there is no
counterfeit detection active.
2.3.4 FACE mode
This mode is available from the home screen by touching the FACE on the
display, or by selecting FACE/Orientation from the menu.
FACE mode allows the user to sort bills based on whether they are loaded into the Domino
face up or face down. The first bill in the hopper determines the sorting and counting
orientation.
FACE ERROR
Remove top bill from stacker.
Not added to count.
Press start to continue.
!
Face Message
If the first bill through the machine is face up, all
bills in the stack that are face up will end up in the
stacker. Any time a bill passes through the
Domino that is not face up, the machine will stop
and prompt the user to remove that bill from the
stack. Total number and total value of the counted
bills will be displayed on the home screen.
C-SORT
10
20
50
COUNT
FACE

Cassida Xpecto LiTE MIX value counter
moving money forward
13
12
2.3.5 ORIENTATION Modes ORIENT
This mode is available from the home screen by touching the ORIENT icon on the
display, or by selecting Face/Orientation from the menu.
ORIENTATION mode allows the user to count and
sort bills by one of 4 orientations. The first bill in the
hopper determines the counting orientation. Any
time a bill passes through the machine and does
not conform to the orientation determined by the
first bill, the machine will stop and prompt the user
to remove the nonconforming bill from the stack.
Total number and total value of the counted bills
will be displayed on the homescreen.
ORIENTATION ERROR
Remove top bill from stacker.
Not added to count.
Press start to continue.
!
Orientation Message
ORIENTATION mode is most effective when used after a stack of bills has already
been faced uniformly by using the FACE mode.
2.3.6 ADD Modes ADD
This mode is available from the home screen by touching the button that corresponds to
the ADD icon on the home screen, or by touch the ADD icon directly. The addition function
provides a cumulative count of bills even across multiple stacks of bills. For example, the
user wants to process 500 bills but the machine can only process 250, which is the limit of
the stacker. The user can process the first 250, then remove the bills from the stacker and
the machine will process the remaining 250 bills and add them to the running total.
This mode is available from the home screen by touching the BATCH icon or by selecting
BATCH from the menu.
2.3.7 BATCH Modes BATCH
The BATCH function is used to select a batch
quantity for a specific counting process. With the
BATCH mode active, the machine counts a preset
number of bills and then stops counting when the
batch number has been reached even if bills
remain in the hopper. By default, opening the
batch menu will set the batch size to 0. From this
menu the batch size can be adjusted by pressing
the +1, +10 , or +10 0 ic ons, and saved by
pressing the enter icon.
Batch Screen
+100
ENTER
Batch Size BACK
+1
+10
OFF
0
A “BATCH FULL” message will flash on the display when the counting reaches the preset
number. The user can then remove the batch of bills from the stacker and the machine will
automatically count out the next batch.
If there are not enough bills in the hopper to complete a batch, a “BATCH INCOMPLETE”
message will flash on the display. More bills can then be added to the hopper and the
batching can be resumed.
TOTAL
This function is available from the home screen by
touching the button that corresponds to the
TOTAL icon, or by touching the TOTAL icon
directly on the touch screen.
The TOTAL function adds all the current counting
results and provides an on-screen report of the
total amount of each denomination counted, the
value of the counted bills of that denomination,
and a grand total value of all bills counted.
2.4 After-Count Functions
2.4.1 Print
This function is available by opening the counting report by pressing TOTAL and then
pressing the PRINT key. If a printer is connected, a detailed printout of the counting report
will be produced.
DENOM PCS AMOUNT
100
50
20
10
5
2
1
10
2
40
200
85
0
16
1000
100
800
2000
425
2
16
4341
TOTAL
Total Screen
BACK

Cassida Xpecto LiTE MIX value counter
15
moving money forward
14
1. Batch
2. Face/Orientation
3. Speed
4. Auto Start
Opens the settings menu allowing access to the following
options:
1. Beeper
Allows the user to toggle the beeping that occurs with
every action
2. Time
Allows the user to adjust the time which appears on the
report printouts
2.5 Menus
1. Batch
2. Face/Orientation
3. Speed
4. Auto Start
5. Settings
6. Service Menu
Batch Screen
ENTER
BACK
The menu can be accessed by pressing the button
that corresponds to the MENU icon or by touching
the MENU icon directly on the touch screen.
Opens the Batch screen
Opens the Face/Orientation screen
Opens the Speed screen, allowing the user to adjust the
count speed
Opens the Auto Start screen, allowing the user to toggle
between manual start mode and auto start mode. This
screen is also accessible by touching the Manual/Auto icon
on the home screen.
5. Settings
3. Version
Allows the user to see the software version
4. Currency
Allows the user to change currency. Note: USD is the
only currency available on the Domino at this time
5. Settings
This menu contains access to delicate sensor settings and
parameters that should only be adjusted by Cassida
technician. The menu is password protected to prevent
the user from accidentally adjusting these settings and
interfering with Xpecto LiTE's ability to operate.
6. Service Menu
2.6 Important Safety Notes
When using this unit, basic safety precautions should always be observed, including the
following:
liquids
• The manual should be available to the operator
• Make certain the unit is installed on a flat surface
smoke, as these conditions may prevent proper operation
as staples or paper clips
• This unit is designed for indoor use in a ventilated environment. Keep the machine away from
direct sunlight or strong directional interior lighting and strong magnetic fields. These could
interfere with the counterfeit detection sensors.
• During operation, do not touch the moving parts of the unit
• Read this manual before operation
• Do not use this unit in areas where it may be exposed to water or any other
• Do not operate the machine in areas with high temperature, humidity or
• Avoid allowing foreign objects into the machine attached to your bills such

Cassida Xpecto LiTE MIX value counter
moving money forward
17
16
• Contact the technician for service or repair. Do not try to replace any parts by yourself.
• When not using the unit for an extended period of time, disconnect the
will expose you to dangerous voltages and other safety risks. Incorrect reassembly can cause
electrical shock when the appliance is
• When finished operating, ensure there are no bills in the hopper or transport
system
power cord from the wall outlet
• To avoid the risk of electrical shock, do not disassemble this unit. Disassembly
• Clean the unit regularly
• Use a surge protector or power conditioner when possible
• Unplug the unit from the wall outlet before cleaning. Use a damp cloth or specifically designed
maintenance accessories such as an air duster, soft bristle brush, or cleaning cards
subsequently used
• Avoid dropping the unit
Error message Solution
ERROR MESSAGES
While in SORT mode, this error will occur when a bill is
passed that does not conform to the denomination of the
first bill passed in the stack
DENOMINATION
ERROR
While in ORIENTATION mode, this error will occur when a bill
is passed that does not conform to the orientation of the
first bill passed in the stack
ORIENTATION
ERROR
While in FACE mode, this error will occur when a bill is
passed that does not conform to the facing of the first bill
passed in the stack
FACE ERROR
This error will occur when bills are pulled through the
machine incorrectly and may cause a miscount
CHAIN ERROR
Error message Solution
This error will occur if two bills pass through the machine
while stuck together and may cause a miscount
DOUBLE ERROR
This error will occur if the machine does not recognize
the bill that was passed through the machine
IMAGE ERROR
This error will occur if the machine suspects a bill to be
counterfeit based on Infrared scanning
IR SUSPECT ERROR
This error will occur if the machine suspects a bill to be
counterfeit based on magnetic scanning
MG SUSPECT ERROR
This error will occur if the machine suspects a bill to be
counterfeit based on ultraviolet scanning
UV SUSPECT ERROR
Check if the upper door is open or a bill exists in the bill
path.
CHECK PS1
Check if the lower door is open or a bill exists in the bill path.
CHECK PS2
3.
MAINTENANCE, WARRANTY, AND SHIPPING INFO
4.
WARNING:
This unit has many sophisticated sensors. To keep the machine running
correctly, it requires proper maintenance. If you notice performance has
deteriorated, please clean all sensors prior to calling a technician. Unplug the
machine completely from all electrical sources before attempting any cleaning
process.
adheres to the sensors, it may cause various problems during operation of the machine.
to the sensors, which are delicate components. If any dust or other foreign matter
All parts of the Xpecto LiTE need daily care and cleaning. Pay close attention

Cassida Xpecto LiTE MIX value counter
moving money forward
19
18
• To avoid malfunction caused by foreign objects, please clean your machine every day
• Clean sensors with a dry cloth frequently
• Rubber rollers may be cleaned with a slightly damp cloth. You may use a small amount of
liquid soap on the cloth but the soap residue should be properly removed.
WARNING:
DO NOT use solvents such as thinner, alcohol, etc. to clean the machine.
4.2 Warranty
Warranty is effective for a period of one year from the date of purchase. In most
cases, malfunctions can be resolved by cleaning the unit.
diagnose the machine to determine warranty and non- warranty claims
• Customer should allow the manufacturer the time and opportunity to test and
• After receiving and unpacking the unit, customer shall keep the package and its
user manual. Warranties are canceled in the event the device is transported in a
non-original packaging or operation/ maintenance conditions are not met
• Company is not responsible for unit malfunction due to improper maintenance,
in the current user manual
Support team.
Warranty service is not available in the following cases:
• There is mechanical damage to the unit or the sealed portions of the
• Manufacturer is entitled to introduce updated software, not described
Non-Warranty Service:
• There are foreign objects or liquid inside the unit
• Cleaning of the unit from dust and mud
storage, or transportation including, but not limited to mechanical damage
• Operation or maintenance rules requirements set in the user manual are not met
unit have been opened or tampered with
The manufacturer can perform maintenance and cleaning for an extra fee.
For a non- warranty repair or maintenance quotation, contact our Technical
4.3 Shipping
List of spare parts:
E-mail: [email protected]
• Belt.
Tel: [phone]
• Thinning Rollers;
• Feed Rollers;
Technical Service Center:
When contacting Cassida Technical Support, please have the following available:
www.cassida.me, www.cassidausa.com
• Serial Number – Located at the back side of your currency counter.
• Steps already taken to resolve the problem, and the results.
• Product model – Located at the back side of your currency counter.
• Nature of the problem – what happened and when did it happen? Did the machine
display error messages?
Note: Incorrect operation of the device or its mechanical damage caused by improper
transportation, storage or operation is not subject to warranty repair.
The warranty does not cover transportation costs associated with the delivery of the device
to the Technical Service Center and back, as well as spare parts.

Cassida Xpecto LiTE MIX value counter
moving money forward
21
20
Office # 101, Biyat Complex
(Landmarks: Emirates Billiard Centre)
Hor Al Anz East, Behind Al Mamzar
Centre Dubai, United Arab Emirates
PO Box 454867
4.4 Specifications
Roller friction
800/1000/1200 bills/min
600 bills (uncirculated)
250 bills (uncirculated)
120x60. 180x90 mm
3.2” LCD Touch Screen
RJ-11, RJ-45, RS-232, USB
MG, UV, IR, CIS
110-240V, 50/60Hz
267 * 267 * 298
6.4kg
50 F – 95 F (10 C – 35 C) Relative humidity below the dew point
not permissible: 20%-90% r.h. (Non – condensing)
Feeding system:
Counting speed:
Hopper capacity:
Stacker capacity:
Banknote size range:
Display:
Interface:
Detection:
Power Supply:
Size (WxDxH):
Weight:
Ambient Temperature:
4.5 Address