Cedes GridScan/Pro User manual

GridScan/Pro Installation guide
CEDES AG, Science Park | CH-7302 Landquart | Phone: [phone] | [email protected] | www.cedes.com
Overview
Installation on door
Blue plug
M8, 6 pin
Black plug
M8, 4 pin
Black plug
M8, 4 pin
Receiver edge
Emitter edge
Control unit
Connection cable
Synchronization cable
connected with Rx
90°
Synchronization cable
Receiver edge
Emitter edge
Control unit
Door operator
Connection cable
Blue plug
M8, 6 pin Black plug
M8, 4 pin
Receiver edge
Emitter edge
Control
unit
Connection cable
Synchronization cable
connected with Tx
1.3
5
3
6
4
For Tx repeat:
1.2
Important:
Switch off main power and mark door „Out of service“.
Mount the receiver edge into the guiding rail next to the door control unit.
114 997 | 200227 | V 1.2
1.1 – 1.3
2
3
1.1
2

USP
0 V
USP
USP
GND (0 V)
USP
GND (0 V)
USP
GND (0 V)
0 V
3.9 VDC
0 V
n.c.
Connection: PNP/NPN LO
Connection: PNP/NPN DO
Connection: FSS
Testsignal
Connection PNP/NPN or FSS - test performed by door operator
Connection FSS - continuous self-test
Outputsignal
Testsignal
Outputsignal
USP
USP
USP
Test
0 V
HIGH
LOW
USP
0 V
HIGH
LOW
Power on
Free
Interrupted
Start-up
Testing
Electrical connection
LED description
Output selector - Output 1Test connection
1 2
22
1
USP (10 ... 30 VDC)
Rx
Tx
GND (0 V)
Test
Not used or
Output 2 (PNP/NPN)
Selectable output logic
Output 1
(PNP/NPN and FSS)
Rx: Tx:
www.cedes.com
Complete Installation and Operation Manual and further information
Manual Product information
and movie