Cisco MX200 G2 User manual

Installing Cisco TelePresence MX200 G2 - Table Stand
78-100247-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved. 1
This installation guide covers MX200 G2 with a table stand.
Dimensions
Height: 775mm / 30.5in.
Width: 995 mm / 39.2in.
Depth: 260mm / 10.2 in.
Weight total: 30 kg / 66 lb
Weight monitor: 24 kg / 53 lb
Manpower
Two people working together are required to mount the
monitor to the table stand.
Room setup
Explore the Cisco Project Workplace website to find
inspiration and guidelines when preparing your office
or meeting room for video conferencing,
http://www.cisco.com/go/projectworkplace
Documentation
Cisco Spark: Visit the Cisco Spark help site to find
more information about Spark registered room
systems, http://help.ciscospark.com
Other services: Visit the Cisco web site to find user
guides and compliance and safety information for
the video system, http://www.cisco.com/go/mx-docs

Installing Cisco TelePresence MX200 G2 - Table Stand
78-100247-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved. 2
C
D
A
B
• Table stand with swivel
• Back cover
• Screwdriver
Monitor
Accessories:
• Microphone(s)
• Cables
• Screws for mounting
the monitor
• Gloves
Touch controller

Installing Cisco TelePresence MX200 G2 - Table Stand
78-100247-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved. 3
Remove the cable
channel lid for now.
You need it in step 3.
The monitor may be tilting slightly
forward. If you gently pull it to a vertical
position, the screws enter more easily.
Front
Use gloves when
handling the monitor. 4 × M6x16
1Mount the monitor on the table stand
A B C

Installing Cisco TelePresence MX200 G2 - Table Stand
78-100247-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved. 4
2Connect the cables
C D
For maintenance only
Reset to factory settings
Audio line output
Always use the provided
power cable.
The wall socket outlet must
be easily accessible after
installation.
Power switch
Audio line input
LAN1
Video input2
(e.g. PC)
Video output2
(e.g. 2nd display)
Power
(100-240 VAC,
50/60 Hz)
Touch
controller1
USB, for future use
HDMI
DVI-I
Microphone3
2nd microphone2, 3
1Use the cable that is labeled with for
the Touch controller; use the cable that
is labeled with for the LAN
2Optional
3Always use the provided Cisco
TelePresence Table Microphone 20

Installing Cisco TelePresence MX200 G2 - Table Stand
78-100247-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved. 5
4Start up the system
• Connect to power and LAN/Ethernet.
• Switch on the system. The power switch is next
to the power connector at the rear side of the
system.
Wait while the unit starts up. Normally this takes a few minutes.
It may include automatic software upgrade and restart of the
Touch controller.
• Follow the instructions on the Touch controller.
Cisco Spark: To find more information on how to get started
with Spark registered systems, visit http://help.ciscospark.com
and look for Getting Started articles for room systems.
Other services: For further information on set-up and
configuration, download the Getting Started Guide from the
Cisco web site, http://www.cisco.com/go/mx-docs
Never move the camera manually when power is switched on;
always use the camera control function on the Touch controller
to change the camera position.
3Lead out the cables
Snap on the cable
channel lid for strain relief.
Lead the cables downward and out at the back.

Installing Cisco TelePresence MX200 G2 - Table Stand
78-100247-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved. 6
EMC Class A declaration
WARNING: This is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
声明
此为
A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种
情况下，可能需要用户对其干扰采取切实可行的措施。
WARNING: This is a class A product. In a domestic environment
this product may cause radio interference in which case the user
may be required to take adequate measures.
5Mount the back cover
Lift this handle to
lock/unlock the back
cover. Use both
hands if required.
A
Cisco has more than 200 offices worldwide.
Find an overview of the offices on the Cisco web site at
http://www.cisco.com/go/offices
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or
its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to
this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the
property of their respective owners. The use of the word partner does not imply a
partnership relationship between Cisco and any other company. (1110R)