Cisco Webex Room Panorama Service manual

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
1
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Collaboration Endpoint software version 9.14
OCTOBER 2020
Administrator guide
for Cisco Webex Room Panorama and Room 70Panorama
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices


D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
2
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Table of contents
Introduction....................................................................................................................... 5
User documentation and software ....................................................................................... 6
What’s new ........................................................................................................................... 7
Room Panorama products at a glance.................................................................................11
Power On and Off ................................................................................................................13
How to administer the video conferencing device ............................................................. 15
Configuration .................................................................................................................. 19
User administration ............................................................................................................. 20
Change the device passphrase .......................................................................................... 21
Restrict the access to the Settings menu........................................................................... 22
Device configuration ........................................................................................................... 23
Add a sign in banner ........................................................................................................... 24
Add a welcome banner....................................................................................................... 25
Manage the service certificates of the device ................................................................... 26
Manage the lists of trusted certificate authorities - CAs.................................................... 27
Set up secure audit logging................................................................................................ 31
Delete CUCM trust lists....................................................................................................... 32
Change the persistency mode............................................................................................ 33
Set up Intelligent Proximity for content sharing .................................................................. 34
Select a multi-screen background image........................................................................... 39
Add corporate branding to the screen and Touch 10 user interface ................................. 40
Add a custom wallpaper ..................................................................................................... 42
Choose a ringtone and set the ringtone volume ................................................................ 43
Manage the Favorites list.................................................................................................... 44
Set up accessibility features............................................................................................... 45
Provisioning of product specific configurations from CUCM.............................................. 46
Peripherals...................................................................................................................... 48
Connect input sources........................................................................................................ 49
Extend the number of input sources....................................................................................51
Information about 4K resolution.......................................................................................... 52
Information about HDMI cables........................................................................................... 53
Set up the SpeakerTrack feature ........................................................................................ 54
Test the loudspeaker connections...................................................................................... 55
Using extra loudspeakers and sound reinforcement.......................................................... 57
Connect the Touch 10 controller ........................................................................................ 58
Thank you for choosing Cisco!
Your Cisco product has been designed to give you many
years of safe, reliable operation.
This part of the product documentation is aimed at
administrators working with the setup and configuration of
the video conferencing device.
Our main objective with this Administrator guide is to
address your goals and needs. Please let us know how
well we succeeded!
May we recommend that you visit the Cisco web site
regularly for updated versions of this guide.
The user documentation can be found on
► https://www.cisco.com/go/room-docs
How to use this guide
The top menu bar and the entries in the Table of contents
are all hyperlinks. You can click on them to go to the topic.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices


D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
3
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Maintenance ................................................................................................................... 63
Installing new software ....................................................................................................... 64
Add option keys .................................................................................................................. 66
Device status ...................................................................................................................... 67
Run diagnostics................................................................................................................... 68
Download log files............................................................................................................... 69
Create a remote support user ............................................................................................ 70
Backup and restore configurations and custom elements ................................................. 71
CUCM provisioning of custom elements ............................................................................ 72
TMS provisioning of custom elements................................................................................ 73
Revert to the previously used software image ....................................................................74
Factory reset the video conferencing device ..................................................................... 75
Factory reset Cisco Touch 10 ............................................................................................. 78
Factory reset Cisco TelePresence Touch 10 ...................................................................... 79
Capture user interface screenshots ................................................................................... 80
Device settings ............................................................................................................... 81
Overview of the device settings ......................................................................................... 82
Audio settings ..................................................................................................................... 88
Bookings settings................................................................................................................ 96
CallHistory settings ............................................................................................................. 97
Cameras settings................................................................................................................ 98
Conference settings ......................................................................................................... 103
FacilityService settings ..................................................................................................... 108
GPIO settings .................................................................................................................... 109
H323 settings.....................................................................................................................110
HttpClient settings .............................................................................................................113
HttpFeedback settings.......................................................................................................114
Logging settings ................................................................................................................115
Macros settings .................................................................................................................117
Network settings................................................................................................................118
NetworkServices settings................................................................................................. 126
Peripherals settings .......................................................................................................... 133
Phonebook settings .......................................................................................................... 135
Provisioning settings......................................................................................................... 137
Proximity settings.............................................................................................................. 140
RoomAnalytics settings .....................................................................................................142
RoomCleanup settings...................................................................................................... 143
RoomReset settings.......................................................................................................... 144
RTP settings...................................................................................................................... 145
Security settings ............................................................................................................... 146
SerialPort settings............................................................................................................. 149
SIP settings ....................................................................................................................... 150
Standby settings ............................................................................................................... 155
SystemUnit settings.......................................................................................................... 157
Time settings .................................................................................................................... 158
UserInterface settings........................................................................................................161
UserManagement settings................................................................................................ 168
Video settings ....................................................................................................................172
WebEngine settings .......................................................................................................... 183
Webex settings ................................................................................................................. 184
WebRTC settings .............................................................................................................. 185
Experimental settings ....................................................................................................... 186
Appendices................................................................................................................... 187
How to use Touch 10 ........................................................................................................ 188
Panoramic video ............................................................................................................... 189
Set up remote monitoring ................................................................................................. 190
Access call information and answer a call while using the web interface.........................191
Place a call using the web interface ................................................................................. 192
Share content using the web interface............................................................................. 194
Local layout control........................................................................................................... 195
Control a far end camera.................................................................................................. 196
Room analytics.................................................................................................................. 197
Customize the video conferencing device's Touch 10 user interface.............................. 199
Customize the video conferencing device's behavior using macros .............................. 201
Remove default buttons from the user interface .............................................................. 202
Use of a third-party USB input device.............................................................................. 203
Sending HTTP(S) requests .............................................................................................. 204
Digital signage................................................................................................................... 205
API-driven web views ....................................................................................................... 206
Input source composition ................................................................................................. 207
Presentation source composition ..................................................................................... 209
Manage startup scripts ......................................................................................................211
Access the device’s XML files ..........................................................................................212
Execute API commands and configurations from the web interface ................................213
Advanced customization of audio......................................................................................214
Connector panel, Room Panorama codec.........................................................................215
Connector panel, Room Panorama amplifier.....................................................................216
Connector panel, Room 70 Panorama...............................................................................217
About Ethernet ports..........................................................................................................218
Audio inputs and outputs ...................................................................................................219
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices


D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
4
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
GPIO connector ................................................................................................................ 221
API access using the COM port........................................................................................ 222
Serial interface for maintenance....................................................................................... 223
Open TCP ports................................................................................................................ 224
HTTPFeedback address from TMS................................................................................... 226
Link an on-premises registered device to Cisco Webex Edge for Devices ..................... 227
Register a device to the Cisco Webex cloud service ....................................................... 228
Supported RFCs ............................................................................................................... 229
Calculating minimum bandwidth ....................................................................................... 230
Technical specification for Room Panorama..................................................................... 231
Technical specification for Room 70 Panorama ............................................................... 233
User documentation on the Cisco web site...................................................................... 235
Cisco contacts .................................................................................................................. 236
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices


D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
5
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Chapter 1
Introduction
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
6
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Products covered in this guide
• Cisco Webex Room Panorama
• Cisco Webex Room 70 Panorama
User documentation
This guide provides you with the information required to
administrate the video conferencing device.
The guide primarily addresses capabilities and
configurations of on-premise registered devices (CUCM,
VCS), but a sub-set of the capabilities and configurations
also applies to devices that are registered to our cloud
service (Cisco Webex).
Refer to the ► User documentation on the Cisco web site
appendix for more information about the guides for this
product.
Documentation on the Cisco web site
Visit the Cisco web site regularly for updated versions of
the guides:
► https://www.cisco.com/go/room-docs
Documentation for cloud registered devices
For more information about devices that are registered to
the Cisco Webex cloud service, visit:
► https://help.webex.com
Cisco Project Workplace
Explore the Cisco Project Workplace to find inspiration
and guidelines when preparing an office or meeting room
for video conferencing:
► https://www.cisco.com/go/projectworkplace
Software
Download software for the endpoint from the Cisco web
site:
► https://software.cisco.com/download/home
We recommend reading the Software release notes
(CE9):
► https://www.cisco.com/c/en/us/support/
collaboration-endpoints/spark-room-kit-series/tsd-
products-support-series-home.html
User documentation and software
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
7
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
This chapter provides an overview of the new and changed
device settings (configurations), and the new features and
improvements in CE9.14, CE9.13, and CE9.12 compared to the
previous version.
For more details, we recommend reading the Software release
notes:
► https://www.cisco.com/c/en/us/support/collaboration-
endpoints/spark-room-kit-series/tsd-products-support-series-
home.html
What’s new
New features and improvements in CE9.14
Web interface visual updates (All products)
The visual appearance of the web interface has
been enhanced. The new styles applied to buttons
and text input fields offer better overall support for
smaller/mobile devices, while maintaining the same
functionality.
Notifications now appear in the lower right corner of
the page.
Pin an important participant in CMS calls
(All products)
In a CMS meeting the host can pin a participant, who
is then always displayed to all other particpants, even
when he/she is not the active speaker.
Music Mode (All products)
If you activate the Music Mode feature, the
microphones can be used to capture a musical
performance while maintaining the echo cancellation
and background noise reduction capabilites in the
device. Music Mode is useful for remote music
lessons, testing musical instruments, and other
situations where music is important.
Music mode is automatically turned off when the call
ends, and the next call is optimized for speech.
Mouse and keyboard re-direct (Desk Pro)
The Desk Pro USB-C docking station capabilities have
been expanded with the addition of USB forwarding
support. This means you can connect a USB
keyboard and/or mouse to your Desk Pro, and use
them for your laptop.
Manual camera control (Desk Pro, Boards)
This new feature lets you make manual adjustments to
your camera position - like zooming, and turning off
the automatic framing feature - on the Desk Pro and
Boards.
Touch button changes
(CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55,
Room55Dual, Room70, Room70G2, RoomPanorama,
Room70Panorama, SX80, SX20, SX10, MX700, MX800, MX200G2,
MX300G2, DX80, DX70)
During out-of-call scenarios, the buttons shown
on the touch interface are now grouped on pages.
Instead of a ‘More’ button, small dots at the bottom of
the screen indicate that there are additional pages of
buttons. Swiping left or right changes the page.
During calls, you will still see the ‘More’ button and
tapping it will display the rest of the buttons in a
scrollable list.
Configurable web data and whiteboard
cleanup
(CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55,
Room55D, Room70, Room70G2, RoomPanorama,
Room70Panorama, DeskPro, Boards)
If you turn the configurable cleanup feature on,
devices will clean up web and whiteboard data at
midnight every day by default. The time of day set
for cleanup is user-definable and can be changed.
Turning the feature off restricts cleanup to a manual
procedure.
The whiteboard functionality is only available for Desk
Pro and Boards.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
8
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Improved user interface for Wi-Fi setup
(CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55, Room55Dual,
Room70, Room70G2, RoomPanorama, Room70Panorama, DeskPro,
Boards, DX80, DX70)
On all devices that support a Wi-Fi connection, the
Wi-Fi setup interface has been improved to simplify
configuration.
Call details in the Recents list (All Products)
The data collected for recent calls, for example packet
loss and jitter, is now more readily available. You can
access this information directly from a device’s touch
interface by tapping the ‘Call’ button and selecting
‘Recents’.
Updates to Cisco Webex Edge for Devices
(All Products)
Enhancements for devices linked to Cisco Webex Edge
for Devices:
• Devices can join Microsoft Teams meetings either
using SIP via a Cloud Video Interop (CVI) gateway or
by running the Microsoft Teams meeting web app
(WebRTC).
• Devices can upload logs to the cloud, if enabled to do
so.
• The cloud device API now supports multi-line
commands.
Speaker Track View Limits
(CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55, Room55Dual,
Room70, Room70G2, RoomPanorama, Room70Panorama, Boards)
The View Limit feature allows you to exclude parts of a
room from view, thereby limiting the maximum camera
view (room overview) used for Speaker Tracking. The
feature has no effect on the view available for manual
camera control.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
9
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Configuration changes in CE9.14
New xConfigurations
Bluetooth Allowed (Desk Pro)
Bluetooth Enabled (Desk Pro)
Bookings ProtocolPriority (All products)
Cameras Camera [1] Exposure Compensation Level (Desk Pro)
Provisioning CUCM CallManagementRecords CallDiagnostics (All products)
Renamed from Provisioning CUCM CallManagementRecords
RoomAnalytics AmbientNoiseEstimation Interval (CodecPro, CodecPlus, RoomKit, RoomKitMini,
Room55, Room55Dual, Room70, Room70G2, RoomPanorama, Room70Panorama, Desk Pro, Boards)
RoomCleanup AutoRun ContentType WebData (CodecPro, CodecPlus, RoomKit, RoomKitMini,
Room55, Room55Dual, Room70, Room70G2, RoomPanorama, Room70Panorama, Desk Pro, Boards)
RoomCleanup AutoRun ContentType Whiteboards (CodecPro, CodecPlus, RoomKit, RoomKitMini,
Room55, Room55Dual, Room70, Room70G2, RoomPanorama, Room70Panorama, Desk Pro, Boards, DX80, DX70)
RoomCleanup AutoRun HourOfDay (CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55,
Room55Dual, Room70, Room70G2, RoomPanorama, Room70Panorama, Desk Pro, Boards, DX80, DX70)
Standby BootAction (Boards)
Standby WakeupAction (Boards)
UserInterface Features Call MusicMode (All products)
Video DefaultLayoutFamily Local (Boards)
Video RememberLayout (All products)
Webex CloudProximity Mode (All products)
WebRTC EndCallTimeout (CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55, Room55Dual, Room70,
Room70G2, RoomPanorama, Room70Panorama, Desk Pro, Boards)
WebRTC InteractionMode (RoomKitMini, Desk Pro, Boards)
xConfigurations that are removed
Provisioning CUCM CallManagementRecords (All products)
Renamed to Provisioning CUCM CallManagementRecords CallDiagnostics
xConfigurations that are modified
Audio Output Line [1] OutputType (CodecPlus, RoomKit, Room55, Room55Dual, Room70)
Added to valuespace: Microphone
Bluetooth Allowed (DX70, DX80)
OLD: Access: public-api-preview
NEW: Access: public-api
Bluetooth Enabled (DX70, DX80)
OLD: Access: public-api-preview
NEW: Access: public-api
Cameras PresenterTrack Connector (CodecPro, Room70G2, RoomPanorama, Room70Panorama)
OLD: 6
NEW: 1
Logging CloudUpload Mode (All products)
OLD: Backend: All
NEW: Backend: On-prem
Peripherals Profile NetworkSwitches (Room 70 Panorama)
OLD: Default: 1
NEW: Default: NotSet
Standby BootAction (Desk Pro)
OLD: Default: DefaultCameraPosition
NEW: Default: RestoreCameraPosition
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
10
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Time Zone (All products)
Added to valuespace: America/Nuuk, America/Punta_Arenas, Antarctica/Casey,
Antarctica/Davis, Antarctica/DumontDUrville, Antarctica/Macquarie, Antarctica/Mawson,
Antarctica/McMurdo, Antarctica/Palmer, Antarctica/Rothera, Antarctica/South_Pole,
Antarctica/Syowa, Antarctica/Troll, Antarctica/Vostok, Arctic/Longyearbyen, Asia/Atyrau,
Asia/Barnaul, Asia/Famagusta, Asia/Qostanay, Asia/Tomsk, Asia/Yangon, Brazil/Acre,
Brazil/DeNoronha, Brazil/East, Brazil/West, CET, CST6CDT, Canada/Atlantic, Canada/
Central, Canada/Eastern, Canada/Mountain, Canada/Newfoundland, Canada/Pacific,
Canada/Saskatchewan, Canada/Yukon, Chile/Continental, Chile/EasterIsland, Cuba, EET,
EST, EST5EDT, Egypt, Eire, Europe/Astrakhan, Europe/Kirov, Europe/Saratov, Europe/
Ulyanovsk, GB, GB-Eire, GMT, GMT+0, GMT-0, GMT0, Greenwich, HST, Hongkong,
Iceland, Iran, Israel, Jamaica, Japan, Kwajalein, Libya, MET, MST, MST7MDT, Mexico/
BajaNorte, Mexico/BajaSur, Mexico/General, NZ, NZ-CHAT, Navajo, PRC, PST8PDT,
Poland, Portugal, ROC, ROK, Singapore, Turkey, UCT, US/Alaska, US/Aleutian, US/
Arizona, US/Central, US/East-Indiana, US/Eastern, US/Hawaii, US/Indiana-Starke, US/
Michigan, US/Mountain, US/Pacific, US/Samoa, UTC, Universal, W-SU, WET, Zulu
UserInterface Assistant ProactiveMeetingJoin (CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55,
Room55Dual, Room70, Room70G2, RoomPanorama, Room70Panorama, Desk Pro, Boards)
OLD: Default: False
NEW: Default: True
Video DefaultLayoutFamily Local (RoomPanorama, Room70Panorama)
OLD: Auto/Equal/Overlay/Panorama/Prominent/Single
NEW: Auto/Equal/Overlay/Prominent/Single
Video DefaultLayoutFamily Remote (RoomPanorama, Room70Panorama)
OLD: Auto/Equal/Overlay/Panorama/Prominent/Single
NEW: Auto/Equal/Overlay/Prominent/Single
Video DefaultLayoutFamily Remote (Desk Pro)
OLD: Auto/Equal/Modal/Overlay/Prominent/Single
NEW: Auto/Equal/Overlay/Prominent/Single
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
11
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Room Panorama products at a glance (page 1 of 2)
Room Panorama
Cisco Webex Room Panorama is a first-class collaboration system
that is built for the modern C-suite. It is an all-in-one solution for
medium to large rooms. Room Panorama transforms your meeting
spaces into a video collaboration hub, whether connecting teams
across the world or in local meetings.
The Room Panorama is built on the Cisco Webex Room Kit Pro
technology platform, with the Codec Pro and the Quad Camera
as core. It has two 82-inch 8K video screens, and a 65-inch 4K
screen for content presentation. The camera provides panorama
video, speaker-tracking, and auto-framing capabilities. The
specially made integrated loudspeaker system consists of twelve
main loudspeakers and four separate bass loudspeakers, driven
by a sixteen channel amplifier. The system supports up to eight
external microphones and has an integrated microphone array to
support accurate speaker tracking.
The Room Panorama is rich in functionality and is designed
to be easily scalable to all your large conference rooms and
spaces. Features like people counting, support for macros, and
a full application programming interface allows for flexibility and
customizations.
The device can be registered on the premises or to the Cisco
Webex cloud service.
Room Panorama consists of separately approved components
(AC/DC adapters, monitors, codec, camera, amplifier, switches,
and a touch user interface), and each component has a power
cord connected directly to a wall socket outlet. Therefore there is
no total rating for the Room Panorama system. You should check
the rating label on each component.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
12
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Room 70 Panorama
Cisco Webex Room 70 Panorama is a high-end collaboration
system. It is an all-in-one solution for medium to large rooms.
Room 70 Panorama transforms your meeting spaces into a video
collaboration hub, whether connecting teams across the world or
in local meetings.
The Room 70 Panorama is based on the Cisco Webex Room 70
Dual G2. It has a powerful codec, a quad-camera, two 70-inch
LED screens, and a 55-inch or 65-inch 4K screen for content
presentation. It has integrated loudspeakers and microphones
for accurate speaker-tracking, and supports up to eight external
microphones. The camera provides panorama video, speaker-
tracking, and auto-framing capabilities.
You can choose between three mounting kit options: a free
standing floor stand, a wall-secured floor stand, and a wall mount
kit. The mounting option determines which content screen size
and placement is available: a 65-inch content screen above the
main screens, or a 55-inch below the main screens.
The Room 70 Panorama is rich in functionality and is designed to
be easily scalable to all your medium to large conference rooms
and spaces. Features like people counting, support for macros,
and a full application programming interface allows for flexibility
and customizations.
The device can be registered on the premises or to the Cisco
Webex cloud service.
Room 70 Panorama consists of the main system and a content
screen. They have separate power cords that are connected
directly to a wall socket outlet. Therefore there is no total rating
for the Room 70 Panorama system.
Room Panorama products at a glance (page 2 of 2)
Freestanding floor stand with
55-inch content screen below the system
Floor stand secured to the wall with
65-inch content screen above the system
Wall mounted system with
65-inch content screen above the system
Floor stand secured to the wall with
55-inch content screen below the system
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
13
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Power On and Off (page 1 of 2)
Power On/Off with the Power switch
Room Panorama
Multiple components connected to wall sockets
Room Panorama consists of many components. Each
component has a power cord that is connected directly to
a wall socket.*
There are socket outlets on both sides of the system. Use
the handles at the bottom of the deco grilles, and pull
down the left and right screens to get access to all the
outlets.
Only a few components have a power switch. To fully turn
off power for the complete system, you must pull out the
plugs from the wall socket outlets.
The power switch of the codec
The codec is behind the left screen. Use the handle at the
bottom of the deco grille, and pull down the left screen to
get access to the codec.
• The power switch is set to On as part of the
installation.
1+12V 2 3 4
COM
GPIO
PoE PoE
Power
switch
The power switch of the camera
The camera has a power switch that is set to On as part
of the installation.
You don't have easy access to this switch when the
system is assembled.
The power switch of the 24 V PSU
This PSU is in the left cavity behind the left screen.
• Use the handle at the bottom of the deco grille, and
pull down the left screen to get access to the PSU.
• The power switch is set to On as part of the
installation.
The power button of the screens
The screens should automatically power up when
connecting them to power. If they don't, you can use the
remote control or the power button to switch them on.
• Main screens: power button below the logo (lower
right)
• Content screen: power button (lower center)
Room 70 Panorama
The main power switch of the system is behind the left
side cover.
• Remove the device’s left side cover (fastened with
magnets)
• The main power switch is next to the main power
connector below the codec.
Note that there is a power switch on the codec as
well. It must be On for the system to work.
Main power switch
Codec power switch
*Refer to the wiring diagram for an overview of all components. The wiring diagram is available online.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
14
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Restart and standby using the user interface
Restart the device
1. Select the device name or address at the top of the user
interface.
2. Select Settings, followed by Restart.
3. Select Restart again to confirm your choice.
Enter standby mode
1. Select the device name or address at the top of the user
interface.
2. Select Standby.
Exit standby mode
• Tap the screen of the Touch controller.
Power Off or restart the device remotely
Sign in to the web interface and navigate to Maintenance >
Restart.
Restart the device
Click Restart device... and confirm your choice.
It takes a few minutes before the device is ready for use.
Power Off the device
Click Shutdown device... and confirm your choice.
You cannot power the device on again remotely.
For the device to power up after a remote shutdown, turn
the power switch Off and then On.
Power On and Off (page 2 of 2)
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
15
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
In general, we recommend you to use the web interface
to administer and maintain the device, as described in
this administrator guide.
Alternatively, you can access the API of the device by
other methods:
• HTTP/HTTPS (also used by the web interface)
• WebSocket
• SSH
• Serial connection
If you want more information about the different access
methods, and how to use the API, refer to the API guide
for the device.
Tip
If the configuration or status is available in the API, the
web interface setting or status translates into an API
configuration or status as follows:
Set X>Y>Zto Value (web)
is the same as
xConfiguration X Y Z: Value (API)
Check X > Y > Z status (web)
is the same as
xStatus X Y Z (API)
For example:
Set SystemUnit > Name to MySystem
is the same as
xConfiguration SystemUnit Name: MySystem
Check SystemUnit > Software > Version status
is the same as
xStatus SystemUnit Software Version
More settings and statuses are available in the web
interface than in the API.
How to administer the video conferencing device
Access method Notes How to enable/disable the methods
HTTP/HTTPS • Used by the web interface of the device
• Non-secure (HTTP) or secure (HTTPS) communication
• HTTPS: Enabled by default
• HTTP: Enabled by default only for devices that have been
upgraded to CE9.4 (or later) from an earlier software
version, provided that the device has not been factory
reset after the upgrade
NetworkServices > HTTP > Mode
Restart the device for changes to take
effect
WebSocket • Tied to HTTP, so that also HTTP or HTTPS must be
enabled before you can use WebSocket
• Encrypted (wss) or unencrypted (ws) communication
• Disabled by default
NetworkServices > HTTP > Mode
NetworkServices > Websocket
Restart the device for changes to take
effect
SSH • Secure TCP/IP connection
• Enabled by default
NetworkServices > SSH > Mode
You do not need to restart the device.
It may take some time for changes to
take effect
Serial connection • Connect to the device with a cable. IP-address, DNS, or
a network is not required
• Enabled by default
• We recommend using the default baud rate, because
the device may return much feedback (SerialPort >
BaudRate)
• For security reasons, you are asked to sign in by default
(SerialPort > LoginRequired)
SerialPort > Mode
Restart the device for changes to take
effect
If all access methods are disabled (set to Off), you can no longer configure the device. You are not able to re-enable
(set to On) any of the access methods, and you must factory reset the device to recover.
(page 1 of 4)
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
16
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Sign in
Enter user name and passphrase for the endpoint and
click Sign In.
The device is delivered with a default user
named admin with no passphrase. Leave the
Passphrase field blank when signing in for the
first time.
It is mandatory to set a password for the
admin user.
Sign out
Hover the mouse over
the user name and
choose Signout from
the drop-down list.
The web interface is the administration portal for
the device. You can connect from a computer and
administer the device remotely. It provides full
configuration access and offers tools and mechanisms
for maintenance.
Note: The web interface requires that HTTP or HTTPS
is enabled (refer to NetworkServices > HTTP > Mode
setting).
We recommend that you use the latest release of one
of the major web browsers. *
How to administer the video conferencing device (page 2 of 4)
The web interface of the device
Connect to the device
Open a web browser and enter the IP address of the
device in the address bar.
How to find the IP address
1. Select the device name or address at the
top of the user interface.
2. Select Settings, followed by About this
device.
*Internet Explorer is no longer supported.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
17
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
The web interface is organized in sub-pages. All sub-pages
shown below are available if the device is registerd to an on-
premise service (CUCM, VCS); the pages shown in grey color are
not available if the device is registered to the Cisco cloud service
(Cisco Webex).
In both cases, a user that is signed in, sees only the pages that he
has access rights for.
Read more about user administration, user roles and access
rights in the ► User administration chapter.
How to administer the video conferencing device (page 3 of 4)
How the web interface is organized
Main menu
Setup
Configuration
Status
Peripherals
Personalization
Favorites
Audio Console
Call ControlHome Security
Users
Service Certificates
CUCM Certificates
Certificate Authorities
Sign In Banner
Non-persistent Mode
Maintenance
Diagnostics
System Logs
Call Logs
User Interface Screenshots
Option Keys
Product Key
Software Upgrade
Backup and Restore
System Recovery
Restart
Integration
UI Extensions Editor
Macro Editor
Startup Scripts
Developer API
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
18
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
You have access to device information, and some basic
configurations and device tests on the device’s user interface.
Device-critical settings and functions, such as network settings,
service activation, and factory reset, may be protected by a
passphrase, refer to the ► Restrict the access to the Settings
menu chapter.
Some of the settings and tests are also part of the Setup assistant
that is launched when the device is powered up for the first time.
The Setup assistant is described in the Getting Started Guide for
devices running CE software.
How to administer the video conferencing device (page 4 of 4)
Settings and device information on the user interface
Access Settings
1. Select the device name or address at the top of the user
interface.
2. Select Settings.
A padlock symbol indicates that a setting is protected
(locked down).
3. Select the setting you want to change, or the test you want to
run.
If a setting is locked down, an authentication window pops up,
and you have to sign in with ADMIN credentials to proceed.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
19
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
Chapter 2
Configuration
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Configuration

D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
20
Cisco Webex Room Panorama and Room 70 Panorama Administrator Guide
You have to sign in to get access to the web and command line
interfaces. You can assign different roles to users, to determine
what they should have access to.
The default user account
The device comes with a default administrator user account with
full access rights. The user name is admin and no passphrase is
initially set.
It is mandatory to set a passphrase for the admin user.
Read how to set the passphrase in the ► Change the device
passphrase chapter.
Create a new user account
1. Sign in to the web interface and navigate to Security > Users.
2. Click Add new user....
3. Fill in the Username, Passphrase and Repeat passphrase input
fields.
As a default, the user has to change the passphrase when he
signs in for the first time.
Fill in the Client Certificate DN (Distinguished Name) field only
if you use client certificates for authentication.
4. Check the appropriate Roles check boxes.
If you assign the ADMIN role to a user, enter your own
passphrase in the Your passphrase input field for verification.
5. Set the Status to Active to activate the user.
6. Click Create User.
Use the Back button to leave without making any changes.
User administration
User roles
A user account may hold one or a
combination of user roles. A user account
with full access rights, like the default
admin user, should possess the ADMIN,
USER and AUDIT roles.
These are the user roles:
ADMIN: A user with this role can create
new users, change most settings, make
calls, and search the contact lists. The
user cannot upload audit certificates and
change the security audit settings.
USER: A user with this role can make
calls and search the contact lists. The
user can modify a few settings, for
example adjust the ringtone volume and
set the time and date format.
AU DIT: A user with this role can change
the security audit settings and upload
audit certificates.
ROOMCONTROL: A user with this role
can create customized UI panels (for
example in-room controls). The user has
access to the UI Extensions editor and
corresponding development tools.
INTEGRATOR: A user with this role has
access to settings, commands and status
that are required to set up advanced AV
scenarios, and to integrate our devices
with 3rd party equipment. Such a user can
also create customized UI panels.
Edit an existing user account
If you make changes to a user that holds the Admin role, you must
always enter your own passphrase in the Your passphrase input
field for verification.
Change the user privileges
1. Sign in to the web interface and navigate to
Security > Users.
2. Click the appropriate user in the list.
3. Choose user roles, set the status to Acitve or
Inactive, and decide if the user has to change the
passphrase on the next sign in.
Fill in the Client Certificate DN (Distinguished
Name) field only if you use certificate login on
HTTPS.
4. Click Edit User to save the changes.
Use the Back button to leave without making any changes.
Change the passphrase
1. Sign in to the web interface and navigate to Security > Users.
2. Click the appropriate user in the list.
3. Enter the new passphrase in the appropriate input fields.
4. Click Change passphrase to save the change.
Use the Back button to leave without making any changes.
Delete the user account
1. Sign in to the web interface and navigate to Security > Users.
2. Click the appropriate user in the list.
3. Click Delete user... and confirm when prompted.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Configuration