Cleveland KDM-25 User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity_______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio,U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site:www.ClevelandRange.com
Email: [e-mail]
DIRECT STEAM KETTLES
Cleveland Standard Features
nCompact, Space Saving Modular Design
nT
ype 304 Stainless Steel with # 4 finish on Kettle and Cabinet
nSteam Control Kit includes: Steam Control Valve, Steam Trap
Assembly, Condensate Strainer, Check Valve, all Factory
Assembled and Mounted
nSpring Assisted, Hinged, Domed Stainless Steel Cover
n2" diameter Tangent Draw-Off Valve with Srainer
nHot and Cold Water Faucet with Swing Spout
n25 psi Steam Jacket Rating and Safety Valve
nKettle Drain Swing Funnel
nTypical approvals include NSF and ASME
FOR TILTING MODELS ONLY
nHigh Capacity Pouring Lip
nPermanently lubricated Power Tilt Mechanism
Options & Accessories
pSteam Pressure Reducing Valve where pressure exceeds 20
psi (PRV)
pSteam Supply Moisture Separator (MS)
pType 316 Stainless Steel Kettle Liner for high acid food
products (316-G)
pCooking Baskets and Tri- Basket Supports (BS and TBS)
pKettle Accessory Kit (KAK) includes:
pClean-up Brush (CB) p36˝ Kettle Paddle (KP)
p36˝ Kettle Whip (KW) p36˝ Kettle Brush (KB)
pDraw-off Brush (DB) p24 oz. Ladle (KL)
pLift-Off Covers (CL)
pMeasuring Strip (MS)
pGallon Markings (KM)
pHot and Cold or Cold Only Kettle Filler with 60" hose (DKF-K
or SKF-K)
Kettle Shall be CLEVELAND, Direct Steam Kettle, Cabinetized,
Model KDM - _____ - T (Power Tilt) or KDM- _____ (stationary);
_____Gallons. 2/3 Steam Jacketed, Type 304 Stainless Steel with
25 psi Steam Jacket Rating; Cabinet and frame to be Type 304
Stainless Steel; includes: Spring Assisted Domed Cover, 2"
Tangent Draw-Off Valve, Hot and Cold Water Faucet with Swing
Spout. To operate, connect directly to a steam source supplying
from 5 to 20 psi steam. Chromed Steam Condensate Trap and
Strainer factory assembled.
Short Form Specifications
MODELS:cKDM-25-T cKDM-25
cKDM-40-T cKDM-60
cKDM-60-T cKDM-80
CABINETIZED, DIRECT STEAM
POWER TILTING OR STATIONARY
2⁄3 STEAM JACKETED
25, 40 or 60 GALLONS (100, 150 or 225 LITERS)
SECT. XPAGE 15
0707
FOR TILTING MODELS ONLY
pPan Carrier (PCK)
pFlowDiverter (FD)
pFood Strainer (FS)

(NOTTOSCALE)
SECT
.XP AGE 16
0707
Litho in U.S.A.
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.
CAPACITIES: (in 8 oz. servings,
other sizes may be calculated.)
25 Gallon / 100 liters . . . 400 servings
40 Gallon / 150 liters . . . 640 servings
60 Gallon / 225 liters . . . 960 servings