Comeup CWG-10151 User manual

Electric Winch
Model: CWG-10151
PN: 158100 220V50Hz 155112 230V50Hz
151151 220V50Hz 152405 240V50Hz
Introduction
 Feature
Lifting capacity: 400 kg wire rope top layer
Lifting height: 58 m
Lifting speed: 12-18 m/min at 50Hz
Brake: Electromagnetic spring-applied failsafe brake
Control: Pendant switch powers the winch
 Unpacking
．Winch assembly 1pc
．Wire rope 9 mm x 60 m w/weight hook CHW-0005 1pc
．Wire rope 8 mm x 100 m w/weight hook CHW-0005 for PN:158100
1pc
．Pendant switch w/cord 3.5 mm2
x 5C x 3 m 1pc
 Read this manual carefully
You should carefully read and understand this manual carefully before
operating it. Careless winch operation may result in personal injury hazards
or property damage.
 Information requesting or parts ordering
Please specify the followings information:
．Winch PN
．Serial number
．Part description
．Replacement part number
．Quantity for each part
Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
 Performance
 Wiring Diagram
Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on the top layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Winch Model CWG-10151
Motor kw x p 1.5 x 4
Recommend
Wire Rope
Size(mm) 9
Breaking (kg) 3,750
1st
Layer
Rated Load
(kg) 50Hz 593
2nd
Layer
Rated Load
(kg) 50Hz 529
3rd
Layer
Rated Load
(kg) 50Hz 478
Speed
(m/min) 50Hz 12 Speed (m/min) 50Hz 13.3
Speed
(m/min)
50Hz 14.8
Rope-Winding Cumulating
Sum (m)
12 Rope-Winding Cumulating
Sum (m)
26 Rope-Winding
Cumulating Sum (m)
40
4th
Layer
Rated Load
(kg) 50Hz 436
5th
Layer
Rated Load
(kg) 50Hz 400
Speed
(m/min) 50Hz 16.2
Speed
(m/min) 50Hz 18
Rope-Winding Cumulating
Sum (m)
57 Rope-Winding Cumulating
Sum (m)
60

Parts List
Item No. Description Part No. Qty
1
Induction motor kit 220V 880841
1 Induction motor kit 240V 880842
Induction motor kit 230V 882543
2 Control kit 220V/240V 881657 1
Control kit 230V,for PN:155112 881658
3 Motor support rack kit 880806 1
4 Drum kit 880807 1
5 Connect shaft kit 880808 1
6 Gearbox support rack kit 880809 1
7 2
nd
stage carrier kit 881663 1
8 1
st
stage carrier kit 881664 1
9 Gear box kit 880814 1
10 1
st
shaft kit 880815 1
11 Gearbox rear cover kit 880816 1
15 Brake kit DC 90V 882042 1
15-1 Brake disc 882046 1
15-2 Brake coil DC 90V 882047 1
17 Brake cover kit 880822 1
18 Wire rope w/weight hook 880823 1
Wire rope w/weight hook for PN:158100 881456
19 Base plate kit 880824 1
Winch Assembly