Connects2 CAM-35 User manual

Image Sensor: PC1058HD
Resolution: 976(H)*592(V)
Min. Illumination: 0.1 LUX
Viewing Angle: 170 °
Power Source: Min 6V/Max 32V
Power Consumption: 47.2mA
User Manual
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation. Please
ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any technical issues.
With this in mind, when contacting Connects2, try to provide as much Information as possible. This will
speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Universal Camera with
4-in-1 Mounting System
Metal Flush / Metal Angle / Metal Square / Rubber Angle Mount
PRODUCT FEATURES/SPECIFICATIONS
CAM-35
CONTENTS
- Camera with 90cm cable to BMW connector
- 115cm power cable
- Metal ush mount
- Metal angle mount
- Metal square mount
- Rubber angle mount
Waterproof Rating: IP68
Camera Cable Length: 1.8m
Video Cable Length: 7.2m
Normal/Reverse Image
Selectable Parking Lines

www.connects2.com
2
Connects2Vision
INSTALLATION
1. Connect the Black wire to a suitable ground and the Red wire to a switched
+12V supply.
2. If the camera is to be used in the rear of the vehicle, the Red wire should be
connected to the reversing light circuit or an interface which provides a reverse
signal.
3. Select a suitable location for the camera and ensure that the area is free from
all cables, fuel & oil. Whenever possible, avoid locations that are subject to road
dirt & water spray.
4. Using your choice of supplied mounting bracket, mount the camera in the
required position on the vehicle (See options below).
5. Using the supplied video cable, connect the camera to the display screen and
ensure that the image is displayed correctly.
6. Adjustment of the camera may be required to ensure that the correct angle of
the image is achieved.