Connects2 CT23VW21 User manual

Double DIN Fitting Kit Installation Manual
1
Part Number. Colour
CT23VW21 black
CT23VW22 piano black
SEAT Mii 2011> *
ŠKODA CITIGO 2011> *
VW up! 2011-2016 *
pos. designation
(1) facia plate
(2) mounting bracket right
(3) mounting bracket left
(4) mounting frame
(5) facia climate control
(6) connection piece ahead
(7) template
(8) mounting bracket complete
(9) washer
(10) flat-head screw (M5x8)
(11) self-tapping screw with collar
1
4
5
2
3
10
8
9
10
10
11
10
6
7
* Only for models with manual air conditioning and glove box

2
OEM dashboard SEAT Mii / SKODA CITIGO / VW up! with manual air conditioning
Pull off the circulating air switch

3
Unclip panel
Remove panel

4
Remove 4 TX20 screws (screws will be required for reassembly)
Place two release keys
into the provided slots

5
Partially remove the OEM head
unit from the dashboard

6
Disconnect the switch panel

7
Fully remove the OEM head
unit from the dashboard
Disconnect the switch panel

8
Disconnect all wiring from
the OEM head unit
Disconnect all wiring from
the OEM head unit

9

10
Pull 3 plugs and 2 Bowden
cables out of the air
conditioning control panel
Pull the Bowden cable out of
the air conditioning control
unit
A
1
1
2
A
C
C
B
B

11
Pull the Bowden cable out of
the air conditioning control
panel
2
Release the attachment
of the Bowden cable

12
Open the glove box

13
Pull the centre console
panel out from the
dashboard

14
Transfer the shape of the facia (5) of the
air conditioning control unit onto the panel
Draw an outline, using the facia (5) of the air conditioning control unit
as template
Place the panel on a flat surface
Place the facia (5) of the air conditioning
control unit centred onto the panel

15
Cut out the inner area
Attention!
Draw additional lines with a 5mm gap inside
the shape drawn in the previous step

16
Cut out the inner area

17
Remove all rough edges with sandpaper
See below for an image of the removed section

18
Centre console panel after modification
Remove the OEM air channel
!If a double DIN head unit without CD/DVD drive (mechless unit / maximal
install depth 140 mm) is going to be installed, the removal of the OEM air channel
is not neccessary: Please proceed to page 20.

19

20
Cut out the marked areas
Cut out the marked areas