Connects2 Aerpro CAKI01 User manual

www.aerpro.com
INSTRUCTION MANUAL
CAKI01
KIA INFODAPTER

www.aerpro.com
2
ABOUT
The Connects2 Infodapter for Kia vehicles allows climate control information to be dis-
played on any aftermarket head unit with rear camera input. The Infodapter also allows
the use of the steering wheel controls with almost every steering wheel control compati-
ble head unit on the market.
DIP SWITCH SETTINGS
See Fig 1.
Up = Off, Down = On
1: On = Pioneer Head Units. Off = All Other Head Units
2: Setting for reverse camera. On = PAL, Off = NTSC. The default setting is Off (NTSC).
3: Resets the display settings back to default. If the display settings have been
manipulated in a way that it is no longer possible to make adjustments, change the
DIP switch #3 from Off to On and back. This will reset the screen settings to the factory
defaults. During this procedure the screen background will change to red. While the
background is red, no settings can be made.
4: Not applicable
Interface Connections
Fig 1.
1234
DIP ON
Reverse Camera output
to head unit and reverse
camera input from
optional camera
Power Harness Steering Wheel
Remote control
connector to
head unit
Dip Switches Not Used
Fig 2.
Á
Æ
Speed Pulse (Pink)
ÀAftermarket head unit
Infodapter
Ã
Aux Input
Ä
ISO
Connector
Reverse Camera Input
Ç
È
10
Reverse camera
(optional)
To car connector
Â
Å
Park Brake (Green)
Reverse (Purple)
Steering Wheel
Control Input
11

www.aerpro.com
3
À Speech Button
Á Track Up/Down
Fig 3.
Steering Wheel Controls
Conguration Menu
To access the menu, push and hold the speech button for 2 seconds (Fig. 3).(if no speech
button, pick up can be used) This will enable the conguration menu. To navigate
through the menu options use the Track Up/ Track Down buttons. To select a menu
Conguration Menu
Infodapter Settings
Language
Version
< Back
Á
Screen Size/Position
Horizontal Size
Horizontal Position
Vertical Size
Vertical Position
< Back
• Infodapter Settings
oScreen Size/Position -
Make sure all 4 corner markers
are touching the corners of the
aftermarket head unit display.
À

www.aerpro.com
4
Conguration Menu...continued
Legal Information
Please consult the relevant road trafc laws governing the country in which this product is being operated.
No liability is accepted for material damage, loss or personal injury, directly or indirectly, from installation and
operation of this product. This product should only be operated when safe to do so.
Preferences
Driver Position Right
Park Brake Source Speed
Restore factory settings
< Back
oPreferences -
Driver Position - Select Left or Right depending
upon vehicle conguration.
Park Assist Version - Select according to the
colour conguration of the park assist tted to
the vehicle.
Park Brake Source - Set to Speed, Brake or
Always On.
Restore factory settings - Reverts all
Infodapter settings to factory defaults.
(This does not restore vehicle settings)
Infodapter Settings
Screen Size/Position
Picture Settings
Preferences
<Back
oPicture Settings -
Adjust Brightness, contrast and
colour saturation.