Connects2 Aerpro CAKI01 User manual

INFODAPTER INSTRUCTION MANUAL
CAKI01
_v1
www
.aerpro.com.au
for select Kia vehicles

2
ABOUT
The Aerpro Infodapter for Kia vehicles allows climate control information to be
displayed on any aftermarket head unit with rear camera input. The Infodapter also
allowsthe use of the steering wheel controlswith almost every steering wheel control
compatible head unit on the market.
DIPSWITCH SETTINGS
See Fig 1.
Up = Off, Down = On
1: On = Pioneer Head Units. Off = All Other Head Units
2: Setting for reverse camera. On = PAL, O = NTSC. The default setting is O (NTSC).
3: Resetsthe display settingsback to default. If the display settingshave been
manipulated in a way that it isno longer possible to make adjustments, change the
DIP switch #3 from Off to On and back. Thiswill reset the screen settingsto the factory
defaults. During thisprocedure the screen background will change to red. While the
background isred, no settingscan be made.
4: Not applicable
INTERFACE CONNECTIONS
Fig 1.
1 2 3 4
DIP ON
Reverse Camera output
to head unit and reverse
camera input from
optional camera
Power Harness Steering Wheel
Remote control
connector to
head unit
Dip Switches Not Used
Fig 2.
Flying Wires:
Pink - Speed Pulse
Lt. Green - Park Brake
Purple/White - Reverse Gear
Aftermarket head unit
Infodapter
Aux Input
ISO
Connector
Reverse Camera Input
Reverse camera
(optional)
To carconnector
Steering Wheel
Control Input
www
.aerpro.com.au

3
A Mute Button
(Push)
B Track Up/Down
Fig 3.
MENU CONTROL
CONFIGURATION MENU
To access the menu, push and hold the Speech button for approximately 8 seconds
Note: For vehicleswith no Speech button, the Mute button can be used instead
Thiswill enable the configuration menu. To navigate through the menu optionsuse the
Track Up/ Track Down buttons.
To select a menu option, push the Speech button once.
Conguration Menu
Infodapter Settings
Language
Version
< Back
B
Screen Size/Position
Horizontal Size
Horizontal Position
Vertical Size
Vertical Position
< Back
•Infodapter Settings
o Screen Size/Position -
Make sure all 4 corner markers
are touching the cornersof the
aftermarket head unit display.
A
www
.aerpro.com.au

4
CONFIGURATION MENU
Legal Information
Please consult the relevant road trac lawsgoverning the country in which thisproduct isbeing operated.
No liability isaccepted for material damage, lossor personal injury, directly or indirectly, from installation and
operation of thisproduct. Thisproduct should only be operated when safe to do so.
Preferences
Driver Position Right
Park Brake Source Speed
Restore factory settings
< Back
o Preferences -
Driver Position - Select Left or Right depending
upon vehicle configuration.
Park Assist Version - Select according to the
colour configuration of the park assist fitted to
the vehicle.
Park Brake Source - Set to Speed, Brake or
AlwaysOn.
Restore factory settings - Reverts all
Infodapter settingsto factory defaults.
(This does not restore vehicle settings)
Infodapter Settings
Screen Size/Position
Picture Settings
Preferences
<Back
o Picture Settings -
Adjust Brightness, contrast and
colour saturation.
If you need assistance setting up or using your Aerpro product now or in the future, call Aerpro Support Australia
TEL: 03 – 8587 8898 FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm AEST. If you would like to download a digital copy of this
manual, or other Aerpro manuals/software, please visit the http://aerpro.com website.
Technical Support