Crestron UC-MM30-T User manual

The UC-MM30-T and UC-MM30-T-I Crestron Flex tabletop conference
systems provide small room video conference solutions for use with the
Microsoft Teams® Rooms intelligent communications platform. They
support a single video display and feature a Crestron Flex tabletop
conference device, UC Bracket Assembly, and Huddly IQ™ Lite camera.
Minimum Requirements
lA video display, connected to the UC Engine.
lA Microsoft Teams or Skype® for Business software account
lAn environment running Microsoft Exchange Server® software (2013
SP1 or later for on-premises installation or Microsoft 365® software
for Cloud) for scheduling and/or Skype for Business 2015 (on-
premises installation or Microsoft 365 software for Cloud)
In the Box
Tabletop Conference Device
1 Flex MM Tabletop Conference Device, Microsoft Teams video
(6511613 or 6511614)
1 PoE+ Injector (2055605)
2 Cable, CAT5e, RJ-45 - RJ-45, 11.8 ft (3.6 m) (2056204)
1 Cable, USB 2.0, A - Micro B, 5.8 ft (1.8 m) (2055579)
UC Bracket Assembly
1 UC Bracket Assembly with UC Engine and HDMI® content
ingest (6511478)
1 Power cord (2053985)
Mounting hardware
Additional Items
1 Huddly IQ™ Lite collaboration camera (6511463)
1 Camera wall mount kit (6510998)
1 Cable, CAT6a, RJ-45 - RJ-45, 20 ft (6.1 m) (6507640)
1 Cable, CAT5e, RJ-45 - RJ-45, 7 ft (2.1 m) (6509924)
1 Cable, HDMI, 20 ft (6.1 m) (6503567)
1 Cable, HDMI, 6 ft (1.8 m) (6503565)
1 Cable, USB 3.0, Right angle USB-C® - A, 6 ft (1.8 m) (6511591)
1 Cable, USB Extension, USB Type A Male-to-Female, 15 ft
(4.6m) (6508260)
1 EDID passthrough (2055728)
1
UC-MM30-T and UC-MM30-T-I QuickStart
Crestron Flex Tabletop Small Room Video Conference System for Microsoft Teams® Rooms Systems

Connect
To make system connections:
1. Remove the connector cover prior to making connections on the
bracket assembly.
2. Make system connections as shown in the following illustrations.
The conference device can communicate with the bracket assembly
over a direct connection or a network connection.
lChoose a Direct Connection for simple installation and setup.
lChoose a Network Connection if the conference device is to be
managed by the XiO Cloud® service.
2
UC-MM30-T and UC-MM30-T-I QuickStart
Crestron Flex Tabletop Small Room Video Conference System for Microsoft Teams® Rooms Systems

Direct Connection
For simplified installation and configuration, use a direct Ethernet connection between the LAN port on the conference device and the direct connect
adapter on the top of the UC Engine.
CAUTION: Only use the direct connect adapter to connect the conference device to the bracket assembly. Do not use the direct connect adapter to
connect the bracket assembly to the network.
NOTE: To manage the conference device with the XiO Cloud® service, make network connections as shown on the following page.
3
UC-MM30-T and UC-MM30-T-I QuickStart
Crestron Flex Tabletop Small Room Video Conference System for Microsoft Teams® Rooms Systems

Network Connection
Use a network connection for full network control of the conference device with the XiO Cloud service.
NOTE: When a network connection is used, disconnect the direct connect adapter from the UC Engine.
4
UC-MM30-T and UC-MM30-T-I QuickStart
Crestron Flex Tabletop Small Room Video Conference System for Microsoft Teams® Rooms Systems

3. Make the remaining system connections as shown below.
5
UC-MM30-T and UC-MM30-T-I QuickStart
Crestron Flex Tabletop Small Room Video Conference System for Microsoft Teams® Rooms Systems

4. Bundle the cables with the integrated cable tie wraps. The cable tie
wraps are reusable.
5. After completing the connections, secure the connector cover using a
#1 Phillips head screwdriver to replace the screw.
Configure
Apply Power
Press the power button on the bottom of the UC Engine and apply power
to all of the other devices in the system.
Configure the Conference Device
1. On a computer, open a web browser to the IP address found in the
conference device's settings.
NOTES:
lThe device and computer must be on the same network switch
and VLAN.
lA login with administrative rights for the device is required.
2. Log in to the device and navigate to DEVICE >Applications.
3. Enter the following information in the appropriate fields:
lTeams Video PC Address: Enter the IP address or hostname of the
UC Engine.
NOTE: The hostname is printed on a label affixed to the UC
Engine.
lTeams Video PC Port: By default, port number 49500 is used. If a
different port number has been configured on the UC Engine, enter
that port number instead.
lTeams Video Username: Enter the login username for the UC
Engine. (The default username is “admin”.)
lTeams Video Password: Enter the login password for the UC
Engine. (The default password is “sfb”.)
4. Click Save Changes.
Configure the System
Use the conference device and your Microsoft Teams or Skype account
credentials to configure the UC Engine. Refer to the Crestron Flex UC
Video Conference Systems (Doc. 8360) for more information.
6
UC-MM30-T and UC-MM30-T-I QuickStart
Crestron Flex Tabletop Small Room Video Conference System for Microsoft Teams® Rooms Systems

Factory Reset
A factory reset may be performed when troubleshooting.
To perform a factory reset on the conference device:
1. Power cycle the device by disconnecting and reapplying power.
2. When the device powers on and the LEDs flash green, tap the home
button below the Crestron® logo 10 times.
3. When prompted, confirm the factory reset. Use the mute buttons to
move the selector to Yes. Press the home button to confirm.
4. The device will reboot. Configure the device as described in Configure.
Visit the Product Page
Scan the QR code to visit the product page.
UC-MM30-T
www.crestron.com/model/6511339
UC-MM30-T-I
www.crestron.com/model/6511340
7
UC-MM30-T and UC-MM30-T-I QuickStart
Crestron Flex Tabletop Small Room Video Conference System for Microsoft Teams® Rooms Systems

Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron, the Crestron logo, and XiO Cloud are either trademarks or registered
trademarks of Crestron Electronics, Inc. in the United States and/or other countries.
HDMI is either a trademark or registered trademark of HDMI Licensing LLC in the
United States and/or other countries. Huddly IQ is either a trademark or registered
trademark of Huddly AS in the United States and/or other countries. Microsoft 365,
Microsoft Exchange Server, Microsoft Teams, andSkype are either trademarks or
registered trademarks of Microsoft Corporation in the United States and/or other
countries. USB-C is either a trademark or registered trademark of USB Implementers
Forum, Inc. in the United States and/or other countries. DisplayPort is either a
trademark or registered trademark of Video Electronics Standards Association in the
United States and/or other countries. Other trademarks, registered trademarks, and
trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Crestron disclaims any proprietary interest in the
marks and names of others. Crestron is not responsible for errors in typography or
photography.
©2020 Crestron Electronics, Inc.
Doc. 8836A
08/28/20
8
UC-MM30-T and UC-MM30-T-I QuickStart
Crestron Flex Tabletop Small Room Video Conference System for Microsoft Teams® Rooms Systems