Decon wheel Focus User manual

2020-04-24
Assembly instructions for Focus/Focus 150
MED3035
1. Remove wheels on both sides.
2. Check the correct placement for the stop pin. You can use the chair antitip
devices or use antitip devices on the E-drive unit. One of them must be
removed.
A
A
B
B

2020-04-24
Only with battery bag
3. Placement for the adapter plate.
4. Assembly the plate (right side) according to picture.
5. Parts pair mountingset:
Item No. Part Number Qty Description
1 MED2000 1 Bracket
2 100 400 004 1 Spacer
3 100 400 017 1 Spacer
4 405239 1 Nordlock Washer
5 HW069 1 Hubsleever M16x1
6 MED2005 1 Bracket
7 MC6SM5x35 3 Screw M5 x 35
8 XSM5BR 3 Plain Washer 5,3
9 XSM5ML 3 Locknut M5
10 XSM8x30 1 Screw M8 x 30
11 XSM8BR 1 Plain Washer 8,4
12 XSM8ML 1 Locknut M8
13 100 400 002 1 Spacer
14 100 400 001 1 Spacer
15 XSM16FJ 1 Single Coil Washer M16
16 XSM16M 1 Nut low model M16
6. Assemble the back placed battery bag.
A
A
B

2020-04-24
Joystick Assembly
MED1426
Item No. Part Number Qty Description
1 XOC-48160-B0 1 Upper holder assembly2
2 XSM6X30 4 Screw M6 x 30
3 XSM6BR 2 Plain washer M6
4 XSM6ML 2 Locknut M6
5 XSM6X16 2 Screw M6 x 16
6 XSM6X10 2 Screw M6 x 10
7 MED1501 1 Bracket
8 MED1521 1 Bracket part1
9 MED1522 1 Bracket part2
1
3
4
5
6
8
7
9
2

2020-04-24
Assembler the Alternate: Attendant control (only right side)
Item No. Part Number Qty Description
1 XOC-48110-A1 1 Joystick
2 MED1316 1 Plate with pin
3 XSM6X16 2 Screw M6 x 16
4 XSM6X35 1 Screw M6 x 35
5 XSM6BR 3 Plain Washer 6,4
6 XSM6ML 3 Locknut M6
7 MED1317 1 Bracket
8 Xklamma2 1 XClamp2
9 100 400 044 1 Spacer
Move this
too the
other side,
if you
assemble
the joystick
on the left
side.

2020-04-24
Alternative attendant control (only right side)
Item No. Part Number Qty Description
1 XSM6TG 1 Thorn Washer 6,4
2 Xklamma2 1 XClamp2
3 XSM6X20 1 Screw M6 x 20
4 XSM6BR 1 Plain Washer 6,4
5 MED1200 1 Attendant control

2020-04-24
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsor.
Sleeves.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M16x1
30 Nm
M18x1
40 Nm