Delfield 8148-EFN User manual

Short Form Specifications
General Definition: LiquiTec™ Cold
Pans with Eutectic Fluid technology
allows food in food pans to be flush
with top of counter. Cold pan meets
NSF standard 7; and can be dropped
into Delfield Mark 7, Shelleyglas®
or Shelleysteel™ counters or existing
counters.
Top: is one-piece 18-gauge stainless
steel, with .62” (1.57cm) overhang
around perimeter and die stamped
19.87” x 11.87” (50.5cm x 30.2cm)
openings with depressed edges.
Formed well below each opening is
6.25” (15.9cm) deep with .5”drain
manifold to gate valve. Each well,
flush with the top, for flush mount
pans to accommodate 12” x 20”
(30.5cm x 50.8cm) pans 4” (7.6cm)
or 6” (15.2cm) deep supplied by oth-
ers. Product temperatures of 33°F
(1°C) to 41°F (5°C) are maintained at
86°F (30°C) ambient room tempera-
ture, meeting NSF 7 requirements.
Sides and bottom: are insulated
with high-density closed-cell poly-
urethane. Exterior housing is
22-gauge galvanized steel.
Refrigeration: system uses
HFC-404A refrigerant. Eutectic fluid
is used as the heat transfer medium.
Condensing unit is suspended
below the cold pan on a 16-gauge
steel frame. Temperature control has
an OFF position to shut down the
cold pan. Unit is supplied with
expansion valve.
Two stainless steel louvers are pro-
vided for field installation on the front
of the cabinet, at least 4" below the
top of the counter. Cutout dimension
for each is 11” x 22” (27.94cm x
55.88cm). Allow at least 12" between
the two louvers to provide air circula-
tion to and from the condensing unit.
Electrical system is 115/60c/1ph with
NEMA 5-15P plug.
Optional Accessories and
Modifications:
• Single or double service flip-up
sneezeguards
• Relocate compressor
• Remote refrigeration
(specify refrigerant)
LiquiTec™ Slim Line Drop-In Self-Contained Eutectic Fluid Refrigerated Cold Pans
MODEL 8148-EFN
8100-EFN
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • [phone] • Fax [phone] • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
PROJECT _____________________________________
ITEM NUMBER_________________________________
QUANTITY _______________ DATE________________
APPROVAL____________________________________

MODEL COUNTER CUTOUT # OF 12” X 20” VOLTS/HERTZ/ NEMA SHIP WEIGHT
NUMBER DIMENSIONS PANS HELD PHASE AMPS H.P. PLUG LBS/KG
8148-EFN
46.90” x 17.50” (119.12cm x 44.45cm) 2 115/60/1 7.0 1/4 5-15P 235/107
8169-EFN
68.46” x 17.50” (173.88cm x 44.45cm) 3 115/60/1 7.0 1/4 5-15P 285/130
8191-EFN
90” x 17.50” (228.60cm x 44.45cm) 4 115/60/1 7.0 1/4 5-15P 295/134
Mechanical Data — Standard Unit
LiquiTec™ Drop-In Self-Contained Eutectic Fluid Refrigerated Cold Pans
8100-EFN
47.66"
121.06 cm
18.20"
46.220cm
69.22"
175.82cm
18.20"
46.22cm
90.78"
230.58cm
18.20"
46.22cm
10.37"
26.34cm
46.38"
117.81cm
10.37"
26.34cm
10.37"
26.34cm
67.94"
172.57cm
6.48"
16.46cm
7.56"
19.20cm
23.25"
59.05cm 15.69"
39.85cm
16.78"
42.62cm
11.87"
30.15cm
19.87"
50.47cm
PLAN VIEW
8148-EFN
PLAN VIEW
8169-EFN
ELEVATION VIEW
8148-EFN ELEVATION VIEW
8169-EFN
ELEVATION VIEW
8191-EFN
PLAN VIEW
8191-EFN
INSIDE WELL DIMENSIONS
ALL MODELS RIGHT END VIEW
ALL MODELS
BTU REQUIREMENTS FOR
REMOTE UNITS ONLY
MODEL# BTU
8148EFN 379
8169EFN 569
8191EFN 758
89.50"
227.33cm
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • [phone] • Fax [phone] • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
DS8100EFN 01/02