m-Dimension 1510 User manual

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Do not return this item to the store. Contact our friendly customer
service department with any . Replacements
for missing or damaged parts are normally shipped the same day!
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
problems or comments
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#1510 Chair
Page 1
#1510 Chair
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!Assistance is required to assemble this chair.
!Never stand on the chair or use it as a ladder.
!
!
!
!
!
Do not tip the chair when seated.
Periodically re-tighten all bolts and legs.
Do not exceed 250 lbs. (113.4 kg) weight limit on the chair.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 2
#1510 Chair
Assembly Instructions
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364.
PARTS LIST
Part Drawing Part Name Qty. Part Drawing Part Name Qty.
A Back 1
1SeatB
C 2Front Leg F
E
D 8
1
1
Long Bolt
with Washers
Short Bolt
with Washers
Allen Wrench

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#1510 Chair
Assembly Instructions
E
F
DF
Step 2 - Lay the Seat (Part B) on a flat surface. Align the bolt holes in the front corner of the Seat with
the corresponding bolt holes in the Front Legs (Part C). Hand thread four Long Bolts with
Washers (Part D) through the Seat and into the Front Legs. Fully tighten the Bolts using the Allen
Wrench (Part F). Do not over tighten the Bolts.
Step 3 - Lay the Back (Part A) on a flat surface. Align the bolt hole on the back of the Seat (Part
B) with the corresponding bolt hole on the middle of the Back. Hand thread a Short Bolt with
Washers (Part E) through the Seat and into the Back. Tighten the bolt using the Allen Wrench
(Part F). Do not fully tighten the bolts.
C
B
A
B

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 4
#1510 Chair
Assembly Instructions
Step 5 - Set the Chair upright. Assembly now is completed.
F
D
Step 4 - Align the bolt holes in the rear corners of the Seat (Part B) with the corresponding bolt holes on
the Back (Part A). Insert clockwise 4 Long Bolts with Washers (Part D) through the Seat and
into the Back. Fully tighten the Bolts using the Allen Wrench (Part F). Do not overtighten the
Bolts.