m-Dimension 6641 User manual

Thank you for purchasing our fine product!
This package contains all other tools necessary for assembly.
A Phillips Head screw driver is needed for assembly.
Page 1
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!
!
!
!
!
!
Give us a chance to make it right
Contact our friendly, U.S. based customer service department with any
problems or comments. Replacements for missing or damaged parts
will be shipped promptly.
Toll Free: 866-528-8364
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
#6641 Contemporary Wood Bench
#6641 Contemporary Wood Bench
Assistance is required to assemble this bench.
Never stand on the bench or use it as a ladder.
Periodically re-tighten all bolts and legs.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.
Do not tip the bench when seated.

Page 2
Assembly Instructions
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Part
Drawing
Part Name Qty. Part
Drawing
Part Name Qty.
#6641 Contemporary Wood Bench
A
BE
C F
2
1
4 1
4
D
PARTS LIST
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed above.
If any parts are damaged or missing, please call our Customer Service Department at
1-866-528-8364.
Side Panel
Bench Seat
Cam Screw
Cam Lock
Allen Wrench
Bolt with
Washers
5/16” x 2-1/4”
6

Assembly Instructions
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#6641 Contemporary Wood Bench
Step 2 - Place one of the Side Panels (Part A) on a flat surface with the inside facing up. Align two
Cam Screws (Part C) with the corresponding holes located on the top edge like shown below.
Using a Phillips Head screw driver, insert the Cam Screws clockwise into the holes until they
are fully seated
** Repeat Step 2 to prepare the remaining Side Panel for assembly.
Step 3 - Place the Bench Seat (Part B) upside down on a flat surface. Align the wood dowels located
on the ends of the Bench Seat with the corresponding holes on the edges of the Side Panels
(Part A). Slide the parts together until they are fully seated. Secure the Side Panels to the
Bench Seat by inserting the Cam Locks (Part D) into the corresponding holes located in the
corners of the Bench Seat. Using a Phillips Head Screwdriver, turn the Cam Locks
clockwise until they are secure.
A
C
A
A
B
D

Assembly Instructions
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 4
#6641 Contemporary Wood Bench
Step 4 - With the Bench Seat still upside down, insert six Bolts with Washers (Part E) through the
corresponding holes in the Bench Seat and into the threaded inserts located in the Side Panels.
Tighten the Bolts using the Allen Wrench (Part F). Do not over tighten the Bolts.
Step 5 - With help, turn the bench upright. Assembly is now complete!
E
F