m-Dimension Raleigh 9010 User manual

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Do not return this item to the store. Contact our friendly customer
service department with any . Replacements
for missing or damaged parts are normally shipped the same day!
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
problems or comments
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#9010 Raleigh Writing Desk
Page 1
#9010 Raleigh Writing Desk
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!Assistance is required to assemble this desk.
!Never stand on the desk or use it as a ladder.
!
!
!
!
!
Do not place any hot items directly on the desk.
Periodically re-tighten all bolts and legs.
Do not exceed 100lbs. (45.36 kg) weight limit on the desk.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 2
#9010 Raleigh Writing Desk
Assembly Instructions
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364.
PARTS LIST
Part Drawing Part Name Qty.
A
Part Drawing Part Name Qty.
B
Adjustable
Foot Glides
D
E
112
2
Top Frame
C6
Allen Wrench
Bolt with
Washers
1
Legs

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#9010 Raleigh Writing Desk
Assembly Instructions
Step 2 - Lay the Top Frame (Part A) up-side down on a flat surface. Align the Legs (Part B) with the
Top Frame like shown below
. Insert three Bolts with Washers (Part D) through the holes in
each tab at the top of the
legs and into the corresponding threaded inserts in the Top Frame .
Tighten the Bolts using the Allen Wrench (Part E). Do not over tighten the bolts.
Step 3 - Attach the
Adjustable Foot Glides (Part C) by threading each Adjustable Foot Glide clockwise
into the threaded insert located on the bottom of the Legs. Tighten each
Adjustable Foot Glide
until it is firmly seated against the bottom of the Legs.
B
Step 4 - With help, set the desk upright. Assembly is now complete.
(Note: It may be necessary to adjust the Adjustable Foot Glides to level the desk properly.)
C
C
C
CC
C
D
DD
D
E
B
A