m-Dimension Anna Accent 1107 User manual

Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#1107 Anna Accent Chair
Page 1
#1107 Anna Accent Chair
Assembly Instructions
WARNING
: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
! Assistance is required to assemble this chair.
! Never stand on the chair or use it as a ladder.
!
!
!
!
!
Do not tip the chair when seated.
Periodically re-tighten all bolts and legs.
Do not exceed 250 lbs. (113.4 kg) weight limit on the chair.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.
Give us a chance to make it right
Replacements for missing or damaged parts are normally
shipped within 24 hours!
Do not return this item to the store. Contact our friendly, U.S. based
customer service department with any problems or comments.
Toll Free: 866-528-8364
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.

Page 2
Assembly Instructions
PARTS LIST
Part Drawing Part Name Qty.
A
Part Drawing Part Name Qty
.
B
C
#1107 Anna Accent Chair
Bolt with
Washers
Allen
Wrench
Seat Cushion
Front Leg
Back Cushion Wood Dowel
PillowD
E
F
G
1
2
6
1
1
1
2
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. The Pillow for this item may be packed inside of the Seat Cushion frame. To access, pull
back the dust cover, exposing the inside of the Seat Cushion. If any parts are damaged or missing,
please call our Customer Service Department at 1-866-528-8364.
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.

Page 3
#1107 Anna Accent Chair
Assembly Instructions
Step 2 - Lay the Back Cushion (Part B) on a flat surface. Insert two Wood Dowels (Part F) into the
middle- center holes located in the Back Cushion (Part B) like shown below.
F
B
A
B
Step 3 - Align the corresponding dowel holes on the Seat Cushion (Part A) with the dowels inserted in
Step 2. Place the Seat Cushion onto the Back Cushion until they are fully seated.
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.

Page 4
#1107 Anna Accent Chair
Assembly Instructions
Step 4 - Insert six Bolts with Washers (Part E) through each of the six holes located on the underside of
the Seat Cushion (Part B). Thread the Bolts with Washers by hand until all of the Bolts have
been inserted. Tighten the Bolts with Washers using the Allen Wrench (Part G). Do not
overtighten the Bolts.
G
E
Re- Attach the Velcro dust cover.
Step 5 - With the bottom of the chair facing up, insert the Front Legs (Part C) clockwise into the two
corresponding holes located in each corner of the Seat Cushion. Continue to thread the legs
until they are firmly seated and squarely aligned with the Seat Cushion frame.
C
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.

Page 5
#1107 Anna Accent Chair
Assembly Instructions
Step 6 - With help, turn the chair upright and place the Pillow (Part D) onto the Seat Cushion.
Assembly is now complete.
LEVELING CHAIR
THE HOLES IN THE SEAT FRAME HAVE BEEN OVERSIZED TO ALLOW FOR
EASIER ASSEMBLY.
If your chair is not sitting level, adjustment may be necessary. To
adjust, slightly loosen the bolts that connect the seat frame to the back frame until
the parts can move freely. Next, set the chair upright (in its intended location) and
apply pressure on the seat frame until all legs touch the ground. Re-tighten the
bolts while keeping the parts in this configuration.
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.