m-Dimension 1123C User manual

Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
Page 1
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!
!
!
!
!
!
Give us a chance to make it right
Contact our friendly, U.S. based customer service department with any
problems or comments. Replacements for missing or damaged parts
will be shipped promptly.
Toll Free: 866-528-8364
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
#1123C Tiburon Two Arm Chair
#1123C Tiburon Two Arm Chair
Assistance is required to assemble this chair.
Never stand on the chair or use it as a ladder.
Periodically re-tighten all bolts and legs.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.
Do not tip the chair when seated.

Page 2
Assembly Instructions
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Part
Drawing
Part Name Qty. Part
Drawing
Part Name Qty.
#1123C Tiburon Two Arm Chair
A
BD
1
2 2
8
C
PARTS LIST
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed above.
If any parts are damaged or missing, please call our Customer Service Department at
1-866-528-8364.
Chair Body Plastic
Gasket
Back Leg Front Leg

Assembly Instructions
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#1123C Tiburon Two Arm Chair
Step 2 - With help, place the Chair Body (Part A) on its back on a flat surface like shown below. Insert
the threaded posts on each Back Leg (Part B) through two Plastic Gaskets (Part C). Align the
threaded posts on the Back Legs with the corresponding threaded inserts located at the back of
the Chair Body. Hand tighten the Back Legs until they are fully seating and in line with the Chair
Body frame. Insert the threaded posts on each Front Leg (Part D) through the two remaining
Plastic Gaskets. Hand tighten the Front Legs until they are fully seated against the Chair Body
frame. Do not overtighten the Legs.
Step 3 - With help, turn the chair upright. Assembly is now complete.
A
C
B
D
Please Note: It may be necessary to adjust the adjustable foot glides on the Back Legs to
properly level the chair.