m-Dimension Sadie 1108 User manual

Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
Page 1
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!
!
!
!
!
!
Give us a chance to make it right
Contact our friendly, U.S. based customer service department with any
problems or comments. Replacements for missing or damaged parts
will be shipped promptly.
Toll Free: 866-528-8364
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
#1108 Sadie Slipper Chair
#1108 Sadie Slipper Chair
Assistance is required to assemble this chair.
Never stand on the chair or use it as a ladder.
Periodically re-tighten all bolts and legs.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.
Do not tip the chair when seated.

Page 2
Assembly Instructions
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Part
Drawing
Part Name Qty. Part
Drawing
Part Name Qty.
#1108 Sadie Slipper Chair
A
BE
C F
1
1
2
1
8
2
D
PARTS LIST
Step 1 - Remove all parts from their packaging and confirm that the quanties match those listed above.
If any parts are damaged or missing, please call our Customer Service Department at
1-866-528-8364.
Leg
Seat Frame
Back Frame
Allen Wrench
Long Bolt
with
Washers
(5/16" × 3")
Wood Dowel

Assembly Instructions
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#1108 Sadie Silpper Chair
Step 2 - Place the Back Frame (Part A) on a flat surface. Insert the Wood Dowels (Part F) into the
middle-center holes located in the Back Frame as shown below.
D
B
A
F
E
Step 3 - With the dust cover pulled back, align the corresponding dowel holes in the Seat Frame (Part
B) with the dowels that were inserted in Step 2. With help, place the Seat Frame onto the
Seat Back until they are fully seated.
Step 4 - Make sure the bolt holes on the inside of the Seat Frame are aligned with the corresponding
holes in the Seat Back. Insert four Bolts with Washers (Part D) through the bolt holes in the
Seat Frame and into the threaded inserts located in the Seat Back. Tighten the bolts using the
Allen Wrench (Part E). Do not over tighten the bolts.

Assembly Instructions
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 4
#1108 Sadie Slipper Chair
Step 5 - With help, place the chair on its side. Insert the Legs (Part C) into the front corners of the Seat
Frame as shown below. Make sure the bolt holes on the Seat Frame are aligned with the
corresponding holes in the Leg. Insert two Bolts with Washers (Part D) through the bolt holes
in the Seat Frame and into the threaded inserts in each Leg. Tighten the bolts using the Allen
Wrench (Part E). Do not over tighten the bolts.
D
CE
Assembly is now complete!
Please note it may be necessary to adjust the adjustable foot glides to properly level the chair.