m-Dimension 1706 User manual

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Do not return this item to the store. Contact our friendly customer
service department with any . Replacements
for missing or damaged parts are normally shipped the same day!
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
problems or comments
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#1706 Oval Back Settee
Page 1
#1706 Oval Back Settee
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
i
s
s
Furniture
!Assistance is required to assemble this settee.
!Never stand on the settee or use it as a ladder.
!
!
!
!
!
Do not tip the settee when seated.
Periodically re-tighten all bolts and legs.
Do not exceed 250 lbs. (113.4 kg) weight limit on the settee.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.
i
s
s
Furniture

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 2
#1706 Oval Back Settee
Assembly Instructions
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364.
PARTS LIST
Part Drawing Part Name Qty. Part Drawing Part Name Qty.
A
B
E
C
D
F
G
H
Back
Seat
1
1
Long Bolt
with
Washers
9
Left Arm
Right Arm
Short Bolt 2
Allen
Wrench 1
1
12
Wood Plug

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#1706 Oval Back Settee
Assembly Instructions
Step 3 - Insert the two Long Bolts with Washers (Part F) clockwise through the leg block and into the
threaded inserts in the Left Arm (Part C). Do not fully tighten the Bolts.
Step 2 - Lay the Settee Back (Part A) on a flat surface. Align the bolt holes in the back of the Settee
Seat (Part B) with the bolt holes in the front of the Settee Back. Insert five Long Bolts with
Washers (Part F) clockwise through the seat and into the Settee Back. Do not fully tighten
the Bolts.
Repeat Step 3 to attach the Right Arm (Part D).
A
B
F
D
C
F

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 4
#1706 Oval Back Settee
Assembly Instructions
Step 4 - With help, turn Settee upright. Align the bolt holes in the end of the Settee Left Arm (Part C)
with the bolt holes in the side of the Settee Back (Part A). Insert a
Short Bolt (Part G) clockwise
through the Arm and into the Settee Back. Tighten the Bolt using the Allen Wrench (Part E).
Do not over tighten the Bolt.
Repeat Step 4 to attach the Right Arm (Part D).
Assembly is complete!
Step 5 - Insert a Wood Plug (Part H) into the bolt hole in the back-side of each Arm (Parts C and D).
Return the Settee to its back and fully tighten all bolts inserted in steps 2 and 3 using the Allen
Wrench (Part E). Do not over tighten the Bolts.
A
C
G
G