m-Dimension Bentwood End Table 8777E User manual

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Do not return this item to the store. Contact our friendly customer
service department with any . Replacements
for missing or damaged parts are normally shipped the same day!
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
problems or comments
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#8777E Bentwood End Table
Page 1
#8777E Bentwood End Table
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!Assistance is required to assemble this table.
!Never stand on the table or use it as a ladder.
!
!
!
!
!
Do not place any hot items directly on the table
Periodically re-tighten all bolts and legs.
Do not exceed 100lbs. (45.36 kg) weight limit on the table.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 2
#8777E Bentwood End Table
Assembly Instructions
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364.
PARTS LIST
Part Drawing Part Name Qty.
A
Part Drawing Part Name Qty.
B
Top Frame
D
E
11
28
Shelf
C1 F
Allen Wrench
Bolt with
Washers
1
Legs
Top Glass

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#8777E Bentwood End Table
Assembly Instructions
Assembly is now complete.
D
F
E
C
EF
B
B
A
Step 2 - Place both Legs (Part B) and the Shelf (Part A) upside down on a flat surface. Align the bolt
holes in the Shelf (Part A) with the bolt holes in the Legs (Part B) like shown below. Insert four
Bolts with Washers (Part E) through the holes in the
Shelf and into the threaded inserts in the
Legs . Tighten the Bolts using the Allen Wrench (Part F). Do not over tighten the bolts.
Step 3 - Place the Top Frame (Part C) upside down on a flat surface. Align the bolt holes in the
Legs
(Part B) with the bolt holes in the
Top Frame (Part C) like shown below. Insert four Bolts with
Washers (Part E) through the holes in the
legs and into the threaded inserts in the underside of
the Top Frame. Tighten the Bolts using the Allen Wrench (Part F). Do not over tighten the bolts.
With help, set the table upright and place the
Top Glass (Part D) on the Top Frame .