m-Dimension Westport Chair 1120 User manual

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Do not return this item to the store. Contact our friendly customer
service department with any . Replacements
for missing or damaged parts are normally shipped the same day!
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
problems or comments
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#1120 Westport Chair
Page 1
#1120 Westport Chair
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!Assistance is required to assemble this chair.
!Never stand on the chair or use it as a ladder.
!
!
!
!
!
Do not tip the chair when seated.
Periodically re-tighten all bolts and legs.
Do not exceed 250 lbs. (113.4 kg) weight limit on the chair.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 2
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364.
PARTS LIST
Part Drawing Part Name Qty.
A
Part Drawing Part Name Qty.
B
C
#1120 Westport Chair
Assembly Instructions
Bolt with
Washers
Allen Wrench
Wood Dowel
D
E
F
G
1
2
1
13
1
2
2
H1
Pillow
Back Leg
Front Leg
Back Frame
Seat Frame

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#1120 Westport Chair
Assembly Instructions
Step 2 - Pull the Velcro® attached dust cover on the bottom of the Seat Frame (Part A) back to
expose the inner frame. Lay the Back Frame (Part B) on a flat surface like shown below.
Insert a
Wood Dowel (Part F) into each hole on either side of the center hole in the Back
Frame. While using the Wood Dowels to locate each part, place the Seat Frame onto the
Back Frame. Insert the five Bolts with Washers (Part G) clockwise through the Seat
Frame
and into the Back Frame . Tighten the bolts using the Allen Wrench (Part H). Do not over tigthen
the bolts.
Step 3 - Insert the Front Legs (Part C) and Back Legs (Part D) into the corresponding notches in the
Seat Frame and Back Frame. Align the bolt holes in the Front Legs (Part C) with the bolt holes
in the Seat Frame. Insert four Bolts with Washers (Part G) through the Seat Frame and into the
Front Legs. Align the bolt holes in the Back Frame with the bolt holes in the Back Legs. Insert
four Bolts with Washers (Part G) through the Back Frame and into the Back Legs. Fully tighten
all the bolts using the Allen Wrench (Part H). Do not over tighten the bolts. Close the Velcro®
attached dust cover on the bottom of the Seat Frame.
C
A
B
G
H
FF
C
D
D
G
H
G

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 4
#1120 Westport Chair
Assembly Instructions
Step 4 - With help, set the chair upright and place the Pillow (Part E) on the seat．
Assembly is now complete.
E