m-Dimension Oliver Occasional Chair 1184 User manual

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Do not return this item to the store. Contact our friendly customer
service department with any . Replacements
for missing or damaged parts are normally shipped the same day!
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
problems or comments
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#1184 Oliver Occasional Chair
Page 1
#1184 Oliver Occasional Chair
Assembly Instructions
WARNING
: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
! Assistance is required to assemble this chair.
! Never stand on the chair or use it as a ladder.
!
!
!
!
!
Do not tip the chair when seated.
Periodically re-tighten all bolts and legs.
Do not exceed 250 lbs. (113.4 kg) weight limit on the chair.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday , 8am-5pm, ET.
Page 2
Assembly Instructions
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, plea se call our Customer Service Department at 1-866-
528-8364.
PARTS LIST
Part Drawing Part Name Qty.
A
Part Drawing Part Name Qty.
B
C
#1184 Oliver Occasional Chair
Allen
Wrench
Seat Cushion
Front Leg
Back Cushion Wood Dowel
D
E
F
G
1
2
1
1
1 2
Long Bolt
with
Washers
8
Short Bolt
with
Washers

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#1184 Oliver Occasional Chair
Assembly Instructions
F
B
Step 2 - Insert two Wood Dowels (Part F) into the middle- center holes located in the back stretcher
of the Back Cushion (Part B) like shown below.
Step 3 - Align the corresponding holes on the Seat Cushion (Part A) with the dowels inserted in Step 2.
Place the Seat Cushion onto the Back Cushion until it is fully seated.
A
B

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 4
#1184 Oliver Occasional Chair
Assembly Instructions
Step 4 - Insert the Short Bolt with Washers (Part E) through the center hole on the underside of the
Seat Cushion (Part B) and into the center hole of the Back Cushion (Part A). Insert four Long
Bolts with Washers (Part D) through the four remaining holes on the underside of the Seat
Cushion and into the corresponding holes in the Back Cushion. Thread the Bolts with Washers
by hand until all of the Bolts have been inserted. Tighten the Bolts with Washers using the
Allen Wrench (Part G). Do not overtighten the Bolts.
A
B
E
D
G
Re- Attach the Velcro dust cover.
C
D
Step 5 - With the bottom of the chair facing up, insert the shoulder portion of the Front Legs (Part C)
into the notch in the Seat Cushion frame like shown below. Slide the legs into position until the
holes in the Front Legs match the holes in the corner blocks. Insert two Long Bolts with
Washers (Part D) through the holes in the corner blocks and into the Front Legs. Tighten the
Bolts using the Allen Wrench (Part G). Do not over tighten the bolts.
Step 6 - With help, turn the chair upright.
Assembly is now complete.
G