m-Dimension 8511 User manual

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Do not return this item to the store. Contact our friendly customer
service department with any . Replacements
for missing or damaged parts are normally shipped the same day!
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
problems or comments
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#8511 Large Burl Accent Table
Page 1
#8511 Large Burl Accent Table
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!
!
!
!
!
!
!
Assistance is required to assemble this table.
Never stand on the table or use it as a ladder.
Do not place hot items directly on the table.
Periodically re-tighten all bolts and legs.
Do not exceed 100 lbs. (45.36 kg) weight limit on the table.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 2
#8511 Large Burl Accent Table
Assembly Instructions
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364.
PARTS LIST
Part Drawing Part Name Qty.
A
Part Drawing Part Name Qty.
B
Table Top
E
F
1 6
3 3
Leg “L” Bracket
Short Bolt
with
Washers
D
C
Shelf
1
6
G
Allen
Wrench
1
Long Bolt
with
Washers

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#8511 Large Burl Accent Table
Assembly Instructions
Step 2 - Place the Table Top (Part A) on a flat surface with the bottom facing up. Insert the shoulder
portion of two Legs (Part B) into the notches in the
Table Top (Part A) frame like shown below.
Slide the two legs into position until the holes in the Legs match the holes in the corner blocks.
Insert two Long Bolts with Washers (Part D) through the holes in the corner blocks and into each
of the Legs. Do not tighten the bolts until instructed.
Step 3 - Insert the Shelf (Part C) into the notches in the Legs (Part B) like shown.
A
B
B
D
C
A
B
B

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 4
#8511 Large Burl Accent Table
Assembly Instructions
Step 4 - Insert the shoulder portion of the remaining Leg (Part B) into the notch in the Table Top (Part A)
frame, while aligning the Shelf with the notch in the Leg. Slide the Leg into position until the holes
in the Leg match the holes in the corner block. Insert two Long Bolts with Washers (Part D)
through the holes in the corner block and into the Leg. Secure the Shelf by inserting two Short
Bolts with Washers (Part E) through the holes in each “L” Bracket (Part F) and into the
corresponding holes in the Shelf (Part C) and Legs (Part B). Tighten all of the Bolts, including
the ones inserted in Step 3, by using the Allen Wrench (Part G). Do not over tighten the bolts.
Step 5 - With help, turn the table upright. Assembly is now complete.
C
A
B
B
DG
EG
F