m-Dimension Eclipse J3468S User manual

Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
Page 1
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!
!
!
!
!
!
Give us a chance to make it right
Contact our friendly, U.S. based customer service department with any
problems or comments. Replacements for missing or damaged parts
will be shipped promptly.
Toll Free: 866-528-8364
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
#J3468S Eclipse Sofa Table
#J3468S Eclipse Sofa Table
Assistance is required to assemble this table.
Never stand on the table or use it as a ladder.
Periodically re-tighten all bolts and legs.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.
Do not place hot or wet items directly on the table surface.

Page 2
Assembly Instructions
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Part
Drawing
Part Name Qty. Part
Drawing
Part Name Qty.
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364.
#J3468S Eclipse Sofa Table
A
BG
C H
1Table Top
Leg 1
Leg 2
1
1
D I Shelf 1
E J
Short Bolt
w/ Washers
(1/4”x3/4”)
Long Bolt
w/ Washers
(1/4”x1-3/4”)
Single Bolt
Bracket
Double Bolt
Bracket
Allen Wrench
Angle Bracket13
2
2
1
1
3
F
PARTS LIST

Assembly Instructions
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#J3468S Eclipse Sofa Table
Step 2 -
C
BF
I
E
G
E
H
C
B
Place Leg 1 (Part B) upside down on a flat surface. Align the bolt holes on the end of Leg 2
with the corresponding holes in the middle of Leg 1, like shown below. Insert 2 Long Bolt with
Washers (Part F) through Leg 1 and into Leg 2. Tighten the Bolt using the Allen Wrench
(Part I). Do not overtighten the Bolts.
Step 3 - Align the bolt hole on the Single Bolt Bracket (Part G) with the top of Leg 1, like shown below.
Insert 2 Short Bolts with Washers (Part E) through the Single Bolt Brackets and into Leg 1.
Align the Double Bolt Bracket (Part H) with the corresponding bolt hole on the end of Leg 2.
Insert 1 Short Bolt with Washers through the Double Bolt Bracket and into Leg 2. Tighten the
Bolts using the Allen Wrench. Do not overtighten the Bolts.

Assembly Instructions
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 4
#J3468S Eclipse Sofa Table
Step 4 -
Step 5 -
D
I
I
I
E
E
E
H
H
A
J
With help, align the bottom of the Shelf (Part D) with the bolt holes on the inside edge of Legs 1
and 2. Align the Angle Brackets (Part J) with the threaded inserts on the bottom of the Shelf
with the threaded inserts on the inside edge of Legs 1 and 2. Insert 6 Short Bolts with Washers
(Part E) through the Angle Brackets and into the Shelf and Leg 1 and 2, like shown below.
Tighten the Bolts using the Allen Wrench. Do not overtighten the Bolts.
Place the Table Top (Part A) upside down on a flat surface. With help, align the Double Bolt
Bracket and the Single Bolt Bracket with the corresponding bolt holes in the bottom of the
Table Top, like shown below. Insert 4 Short Bolts with Washers (Part E) through the Single
and Double Bolt Brackets and into the Table Top. Tighten the Bolts using the Allen Wrench.
Do not overtighten the Bolts.

Assembly Instructions
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 5
#J3468S Eclipse Sofa Table
Step 6 - With help, turn the assembled frame right side up.
Please note: It may be necessary to adjust the adjustable foot glides in order to properly level
the table.
Assembly is complete.