m-Dimension 8626 User manual

Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
Page 1
#8626 School House
Round Accent Table
Assembly Instructions
WARNING: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
!Assistance is required to assemble this table.
!Never stand on the table or use it as a ladder.
!
!
!
Periodically re-tighten all bolts and legs.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.
Give us a chance to make it right
Replacements for missing or damaged parts are normally
shipped within 24 hours!
Do not return this item to the store. Contact our friendly, U.S. based
customer service department with any problems or comments.
Toll Free: 866-528-8364
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
#8626 School House Round Accent Table

Page 2
PARTS LIST
Part Drawing Part Name Qty.
A
Part Drawing Part Name Qty.
B
D
E
C
Table Top
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed above.
If any parts are damaged or missing,please call our Customer Service Department at 1-866-528-8364.
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Base
Foot Glide
1
1
3
4
1
Bolt with
Washers
Allen Wrench
#8626 School House
Round Accent Table
Assembly Instructions

Page 3
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Step 3 - Hand thread the three foot glides (Part -C) clockwise into corresponding threaded holes on the
bottom of the legs of the Base.
#8626 School House
Round Accent Table
Assembly Instructions
B
A
C
C
C
D
E
Step 2 - Place the Table Top (Part -A) upside down on a flat surface. Align the bolt holes in the
connection tab on the Base (Part -B) with the bolt holes in the bottom of the sub-frame on the
Table Top like shown below. Insert four Bolts with Washers (Part D) through the bolt holes in the
connection tab on the Base and into the bolt holes in the bottom of the sub-frame of the Table
Top. Tighten the bolts using the Allen Wrench (Part E). Do not over tighten the bolts.

Page 4
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Step 4 - With help, turn the table up- right. Assembly is now complete.
Please Note: It may be necessary to adjust foot glides to properly level the table.
#8626 School House
Round Accent Table
Assembly Instructions