m-Dimension Accent 8530 User manual

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Do not return this item to the store. Contact our friendly customer
service department with any . Replacements
for missing or damaged parts are normally shipped the same day!
Monday - Friday, 8am-5pm, ET. After business hours, leave a message.
We will return your call the next business day.
problems or comments
Thank you for purchasing our fine product!
This package contains all tools necessary for assembly.
#8530 Accent Table
Page 1
#8530 Accent Table
Assembly Instructions
WARNING
: Failure to follow these directions and warnings can result in serious injury
and/or product damage.
! Assistance is required to assemble this table.
! Never stand on the table or use it as a ladder.
!
!
!
!
Periodically re-tighten all bolts and legs.
Do not exceed 100 lbs. (45.36 kg) weight limit on the table.
If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
Always seek assistance before moving furniture.

Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 2
#8530 Accent Table
Assembly Instructions
Step 1 - Remove all parts from their packaging and confirm that the quantities match those listed
above. If any parts are damaged or missing, please call our Customer Service Department at 1-866-
528-8364.
PARTS LIST
i
m
e
n
o
n
s
s
Furniture
A
B
C
D
E
F
H
1
3
1
6
6
1
1
G
Table Top
Leg
Shelf 1/4”
Allen Wrench
1/4” Bolt
W/ Washers
5/16”
Allen Wrench
Part Drawing Part Name Qty. Qty.Part Drawing Part Name
“L” Shaped
Bracket
3
5/16” Bolt
W/ Washers

Step 2 -
Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#8530 Accent Table
Assembly Instructions
Place the Table Top (Part A) top side down on a flat surface. Align the bolt holes on the inside of the Leg
(Part B) with the bolt holes in the leg blocks on the underside of the table. Insert clockwise, six 5/16” Bolts
w/ Washers (Part F) through the leg blocks and into the legs. Tighten the bolts using the 5/16” Allen
Wrench (Part H). Do not fully tighten the bolts.
Step 3 - Insert the Shelf (Part C) into the corresponding notches in the legs. Align the “L” Shaped Brackets
(Part D) with the corresponding holes on the inside of the Legs (Part B) and underneath the Shelf.
Insert clockwise the 1/4” Bolts w/ Washers (Part E) through the “L” Shaped Brackets and into the
threaded inserts in the Legs and Shelf. Tighten the bolts using the 1/4” Allen Wrench (Part G). Fully
tighten all of the bolts including the bolts inserted in Step 2. Do not over tighten the bolts.
Assembly now is complete!
B
A
FH
GE
C
D