Dogtra 1900S HANDSFREE User manual

1
1900S HANDSFREE
1-DOG SYSTEM ONLY
Owner's Manual
Please read this manual thoroughly
before operating the 1900S HANDSFREE training e-collar.

2
IMPORTANT SAFETY AND PRODUCT
INFORMATION
WARNING
Please read all safety and product information below
before using your Dogtra product. Failure to follow
these safety instructions could result in injury to you,
your dog and others, or it could result in damage to your
Dogtra product or other property.
PRODUCT SAFETY
Training Methods
Dogtra products may be used with a variety of training
methods. However, each dog may have a different reaction
to training methods and to Dogtra products. Closely
observe your dog when determining the right training
method to use with your Dogtra product.
Aggressive Dogs
Do not use Dogtra products with aggressive dogs as such
dogs may react adversely and cause injury to people or
other dogs. Seek the assistance of a dog-training specialist
or veterinarian when dealing with aggressive dogs.
Children
Dogtra products are not toys. Adult supervision and close
attention are necessary when Dogtra products are used by
or near children.
PRODUCT DAMAGE
Electrical Product
Your Dogtra product contains electrical components and
batteries. Do not use or keep your product near heat or
flammable sources. Such use or storage may damage your

3
product and/or cause fire, explosion, injury, or property
damage.
Medical Device Interference
Dogtra products contain electrical and magnetic
components that emit low level electromagnetic waves and
radio frequencies. These electromagnetic waves or radio
frequencies may interfere with pacemakers, defibrillators,
or other medical devices. Consult your physician or
medical device maker before using your medical device
with a Dogtra product. If you think that your Dogtra
product is interfering with your pacemaker, defibrillator,
or other medical device, stop using the Dogtra product.
Inadvertent Activation
The digital microprocessor offers thousands of unique
codes to eliminate frequency match-up with other Dogtra
e-collars. The Constant button will automatically shut
down after being held down for 12 seconds or more as a
safety feature.
UNAUTHORIZED USE
Your Dogtra product should be used only in a humane
manner to train and educate your dog. Dogtra products
are not intended for use in any other manner nor are they
intended for use with other animals or with humans.
BATTERY
Your Dogtra product contains batteries. Take care when
removing and installing batteries as your fingers may get
caught. Dispose of batteries as provided by your local
regulations. Do not disassemble, crush, heat, or otherwise
alter the battery as it may cause fire, injury or property
damage.

4
CONTENTS
AT A GLANCE ..................................................................
MAIN FEATURES ............................................................
OVERVIEW ......................................................................
UNDERSTANDING YOUR TRAINING SYSTEM
TURNING THE 1900S HANDSFREE
ON/OFF ......................................................................
TRANSMITTER BUTTON FUNCTION ..................
HANDSFREE INFORMATION ................................
RECEIVER FITTING .................................................
FINDING THE RIGHT STIMULATION ...................
MAXIMIZING THE DISTANCE ..............................
LED INDICATOR .......................................................
CHARGING THE BATTERY ....................................
HANDHELD TRANSMITTER LCD .........................
ATTACHING THE BELT CLIP ..................................
USING THE TEST LIGHT .........................................
GENERAL TRAINING TIPS ...........................................
MAINTENANCE ...............................................................
FCC WARNING ................................................................
TROUBLESHOOTING GUIDE .......................................
WARRANTY AND REPAIR INFORMATION ..............
5
6
7
9
10
11
16
18
19
21
22
24
26
27
29
31
32
33
35
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.

5
AT A GLANCE
Optional Accessories
Auto Charger
Dogtra's auto chargers are designed for use with a
10 volt car outlet.
European Charger
Dogtra’s European chargers are designed for use with a
230 volt AC electrical outlet.
To purchase accessories, please visit www.dogtra.com or
call customer service at [phone].
Owner's
Manual
Belt Clip Test Light Splitter
Cable
ReceiverTransmitter HANDSFREE
Remote
Controller
Battery
Charger

6
• Easy-to-use, ergonomically fitted transmitter
• Rheostat Dial that allows for gradual adjustments in
stimulation intensity with no jumps between levels
(0-127)
• HANDSFREE operation with HANDSFREE Remote
Controller
• 3/4-mile range
• High output
• 2 different stimulation types - Nick & Constant
• High Performance Pager (HPP) vibration feature
• 2-hour rapid charge lithium polymer batteries
• IPX9K waterproof certified - the highest heat and
water pressure test
• One-charging system allows the transmitter and
receiver to be charged at the same time
• Easily visible blue LCD screen displays the exact level
of stimulation that can be seen in the dark
• A three bar battery life indicator and LED colored
indicator to show the remaining battery life
• Enhanced contact points
• For dogs as small as 35 pounds
MAIN FEATURES

7
Rheostat Dial
On/Off
Button
Belt Clip
Battery Charging
Receptacle &
Rubber Plug
Nick
LED
Indicator
Light
Constant
1900S HANDSFREE
Transmitter
OVERVIEW
LCD
Screen
Pager
Antenna

8
Contact Points
Collar Strap
Battery Charging
Receptacle &
Rubber Plug LED Indicator Light
On/Off
Button
Strap
Indicator Light
Buckle
Button
1900S HANDSFREE
HANDSFREE Remote Controller
1900S HANDSFREE
Receiver

9
UNDERSTANDING YOUR
TRAINING SYSTEM
To turn the handheld transmitter on, hold down the
button on the right side of the transmitter until the LCD
screen illuminates. To turn the transmitter off, hold down
the same button on the right side of the transmitter until
the LCD screen shuts off.
To turn the receiver on, hold down the on/off button until
the LED indicator turns green. To turn the receiver off,
hold down the on/off button until the LED indicator turns
red.
On/Off
Button
1. Turning the 1900S HANDSFREE On/Off
On/Off Button

10
2. Transmitter Button Function
The 1900S HANDSFREE unit has four buttons on the
handheld transmitter (one on the face of the transmitter,
two on the left side, and one on the right side).
Nick Button
The Nick button is located on the top of the left side
of the handheld transmitter. When the Nick button
is pressed, the receiver emits a single rapid pulse of
electrical stimulation.
Constant Button
The Constant button is located on the bottom of the left
side of the handheld transmitter. Pressing the Constant
button gives continuous stimulation as long as the
button is pushed, for up to 12 seconds. If the button
is not released after 12 seconds, the stimulation will
automatically turn off as a safety feature. The receiver
will be ready to be reactivated once the button has been
released.
Pager Button
The Pager button is located on the face of the transmitter.
Pressing it will give a vibration for as long as the button is
pressed, for up to 12 seconds.
Nick
Constant
Pager

11
On/Off Button
The on/off button is located on the right side of the
transmitter.
The HANDSFREE Remote Controller gives you the
freedom to multi-task and have discreet fingertip control
of the 1900S HANDSFREE. The function (Nick, Constant,
or Pager) can be coded to the HANDSFREE Remote
Controller for you to operate remotely. You may press the
HANDSFREE Remote Controller button instead of having
to carry the transmitter in your hand.
3. HANDSFREE Information
The HANDSFREE Remote Controller has been tested and
can be used in extreme conditions, between -4 °F to 140 °F.

12
Range
Depending on where the handheld transmitter is placed,
your body can act as a barrier between the HANDSFREE
Remote Controller and the transmitter. The handheld
transmitter's antenna should be kept in the open for
maximum range. Placing the transmitter in the bottom of
a bag or in a cargo pocket where the antenna is covered
may reduce the range between the transmitter and the
receiver. The HANDSFREE Remote Controller will need to
be within 33 feet of the of the transmitter to work.
Battery Life
The LED on the HANDSFREE Remote Controller will blink
when the button is pressed. Replace the battery in the
HANDSFREE Remote Controller when the LED no longer
blinks. With normal usage (button held for 12 seconds,
100 times a day), the battery should last 7-10 years.

13
Fastening the HANDSFREE Remote Controller Strap
The HANDSFREE Remote Controller strap can be
fastened to your fingers, wrist, palm, or around a gun
stock. Follow the fastening instructions below.
1. Wrap the strap around the object you are fastening
the strap to. Pull the strap through the lower section of
the buckle and use the notch to keep the HANDSFREE
Remote Controller securely in place.
2. Loop the strap back through the top section of the
buckle.

14
Changing the HANDSFREE Remote Controller
Stimulation Mode
The default setting for the HANDSFREE Remote
Controller button is the Constant stimulation.
To change the setting to the Pager or Nick stimulation (or
back to Constant stimulation) proceed with the following
steps:
1. Begin with the transmitter turned off.
2. On the handheld transmitter, hold down the
following buttons to code the desired function on the
HANDSFREE Remote Controller.
Constant = Hold down the on/off button and
the Constant
Pager = Hold down the on/off button and the Pager
Nick = Hold down the on/off button and the Nick
Hold down these buttons until you see a rapid blinking
light on the transmitter.
3. Once you see the rapidly blinking light, release the
buttons.
4. Hold down the HANDSFREE Remote Controller button
until the rapidly flashing light on the transmitter and
controller both show a solid light.
5. Release all buttons. The HANDSFREE Remote
Controller should now be coded.

15
Nick
Constant
HANDSFREE
Remote
Controller
Button

16
Proper Fit
The receiver should be fitted so that the surgical stainless
steel contact points press firmly against the dog’s skin.
You should be able to fit two fingers underneath the
collar strap. The best location is on either side of the
dog’s windpipe.
Improper Fit
A loose fit can allow the receiver to move around on the
dog’s neck. When this happens, the contact points may
rub against the skin and cause irritation. If the receiver
is too loose, the contact will not be consistent and cause
the corrections to be inconsistent. Dogtra uses surgical
stainless steel contact points and anti-microbial plastic to
protect the dog’s skin.
4. Receiver Fitting

17
Attention!
Leaving the receiver in the same location on the dog’s
neck for an extended period of time can cause skin
irritation. If the dog is to wear the e-collar for long
periods, occasionally reposition the receiver so that
the contact points are moved to a different location
on the dog’s neck. Make sure you check for skin
irritation each time you use the unit.

18
The 1900S HANDSFREE has a Rheostat Dial on the
top of the transmitter (0 is the lowest and 127 is the
highest). Remember that you will need to adjust the
setting (upward or downward) depending on your dog’s
temperament and threshold for stimulation. Always
start at the lowest level and work your way up. The
appropriate level can be found when the dog responds
to the stimulation with a mild reaction. Also, as the dog’s
attitude changes, especially during times of increased
excitement or distraction, you may need to adjust the
intensity level.
Note: The stimulation intensity can be adjusted even
when the stimulation is in use.
5. Finding the Right Stimulation

19
The 1900S HANDSFREE has a 3/4-mile range. Depending
on the way you use your transmitter, the transmitter
range may vary.
To get the greatest range, hold the transmitter away from
your body and avoid touching the antenna. Keep your
unit properly charged for maximum signal strength.
Typical range
Maximum range Minimum range
6. Maximizing the Distance

20
The range on the 1900S HANDSFREE Remote Controller
is reduced when the handheld transmitter's antenna
is covered or in contact with your body. Refer to the
following carrying methods for optimal range.
Carry the handheld transmitter with the antenna facing
away from you.
Do not place the handheld transmitter with the antenna
touching your body or facing downwards.