Doro PhoneEasy 312ci User manual

PhoneEasy
312ci
English
Français
Español
Italiano
Ελληνικά

Telephone line socket
Handset hook
Keypad
Handset cord socket
Handset volume
Recall
Call memory / �K/ �K
Delete
Mains adapter socket
Ring volume
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Speed dial keys
Phone book
Ring melody
Ring tone
Speaker volume
Speakerphone
UP/D�WN
New call indicator
Ringer indicator
11.
12.
13.
14.
15.
16.
17.
18.
19.
English
1
2
3
4
5
6
7
8
19
18
17
16
15
14
13
9
10
11
12

Prise de ligne téléphonique
Languette de support du
combiné
Clavier
Prise du cordon du combiné
Volume du combiné
Touche R
Journal des appels / �K/ �K
Effacer
Prise du bloc d’alimentation
1.
2.
3.
4.
5.
6.
7.
8.
9.
Volume de la sonnerie
Touches mémoires directes
Répertoire
Mélodie
Tonalité d’appel
Volume du haut-parleur
Haut-parleur
HAUT/BAS
Témoin de nouvel appel
Témoin de la sonnerie
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Français
Toma de la línea telefónica
Gancho del auricular
Teclado
Toma del cable del auricular
Volumen del auricular
Tecla de retirada de línea
Memoria de llamadas / Aceptar
Borrar
Toma del adaptador de red
Volumen de la señal
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Teclas de marcación rápida
Guía
Melodía de la señal
Tono de la señal
Volumen del altavoz
Altavoz
ARRIBA / ABAJ�
Indicador de llamada nueva
Indicador de señal
11.
12.
13.
14.
15.
16.
17.
18.
19.
Español
Presa linea telefonica
Gancio cornetta
Tastiera
Presa cavo cornetta
Volume cornetta
Tasto di messa in attesa
Ultime chiamate / �K
Elimina
Presa adattatore di rete
Volume suoneria
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Tasti composizione rapida
Rubrica telefonica
Melodia suoneria
Suoneria
Volume microfono
Vivavoce
FRECCIA SU/FRECCIA GIÙ
Indicatore nuova chiamata
Indicatore suoneria
11.
12.
13.
14.
15.
16.
17.
18.
19.
Italiano

Υποδοχή τηλεφωνικής
γραμμής
Άγκιστρο ακουστικού
Πληκτρολόγιο
Υποδοχή καλωδίου
ακουστικού
Ένταση ήχου ακουστικού
Πλήκτρο ειδικών λειτουργιών
Μνήμη κλήσεων / OK
Διαγραφή
Υποδοχή καλωδίου
τροφοδοσίας
1.
2.
3.
4.
5.
6.
7.
8.
9.
Ένταση ήχου κλήσης
Πλήκτρα ταχείας κλήσης
Τηλεφωνικός κατάλογος
Μελωδία ήχου κλήσης
Ήχος κλήσης
Ένταση ηχείου
Ηχείο
ΕΠΑΝΩ/ΚΑΤΩ
Φωτεινή ένδειξη
εισερχόμενης κλήσης
Φωτεινή ένδειξη ήχου κλήσης
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Ελληνικά

1
English
Description
Doro PhoneEasy 312ci
Doro PhoneEasy 312ci can be used as a desktop or wall-mounted
telephone. Enhanced ring volume and visual call indication make
this telephone well suited for people with hearing difficulties.
The extra-large keypad and easy to read display with large
characters make the telephone easy to use even with impaired
eyesight.
The built-in phonebook can store up to 30 names and numbers.
Three one touch memory keys can be programmed for frequently
used numbers or emergency numbers. A call memory logs the 15
most recently incoming and outgoing calls.
A speakerphone function allows you to talk hands-free with the
simple press of a button.

2
English
Installation
Connection
Connect the curly cord to the handset and to socket marked
yon the telephone.
Connect the telephone line cord to a network wall socket and
to the Ksocket on the back of the telephone.
Lift the handset and listen for the dial tone.
Batteries
Four AA alkaline batteries are needed for the call memory and
speakerphone. When BATT. LOW is displayed, replace all 4
batteries. Use only AA alkaline batteries of good quality.
Note!
Before installing or changing the batteries, make sure that
the telephone is not connected to the telephone network.
Disconnect the telephone line cord.
Remove the battery cover.
Insert the batteries ensuring correct battery polarity is
observed.
Replace the battery cover and reconnect the telephone line
cord.
1.
2.
3.
1.
2.
3.
4.

3
English
Basic setup
Before using the telephone the first time, the following basic
settings should be made.
After confirming a setting, the next setting is automatically
displayed. The setup mode will automatically time out after
30 seconds of inactivity. You can exit setup mode anytime by
pressing .
Time and date
If the phone has not been setup, the display clock will show
00:00 when the batteries are installed.
Press and hold *for about 5 seconds until the hour flashes.
Use v / Vto change the value and confirm with .
Repeat steps 1–2 to set the minutes, day and
month.
Display language
When the date has been set, ENGLISH is displayed. You can now
choose between 8 display languages:
English - Français - Español - Italiano
Deutsch - Nederlands - Polski - Svenska
Use v / Vto select the desired language, and confirm
with .
Display contrast
-2- CONTRAST is displayed.
Use v / Vto select a suitable display contrast setting (1–4),
and confirm with .
1.
2.
3.

4
English
Key tone
KEYT. ON is displayed. You can select if a tone should be heard
when a key is pressed.
Use v / Vto set key tone �N/�FF, and confirm with .
Flash time
-100- FLASH is displayed.
Use v / Vto set the flash key time (100/300/600 ms), and
confirm with .
100 is the standard setting for most countries.
300 for France/Portugal.
Call indicator
LED OFF is displayed.
Use v / Vto enable/disable the LED indicator for new calls,
and confirm with .
Tone/pulse
TONE is displayed.
Use v / Vto select either tone or pulse dialling mode, and
confirm with .
Note!
If you are unsure of which dialling mode to use, select TONE
as this works in most locations.
Basic setup of the telephone is now completed.

5
English
Wall mounting
The telephone can be wall mounted by using the included wall
mount bracket and two screws (not included).
Warning!
Make sure that no cables, water pipes or gas pipes are
located inside the wall before drilling into it.
Drill two holes in the wall, corresponding to the holes in the
wall mount bracket.
Insert the screws, allowing them to project ~5 mm out from
the wall.
Unplug and remove the handset.
Fit the guide tabs (A) on the bracket into the slots (B) on the
back of the telephone, then slide the bracket upwards until it
snaps into place.
B
A
1.
2.
3.
4.

6
English
Position the telephone so that the screws on the wall fit into
the slots in the bracket, then slide the telephone downwards
until it is hanging on the screws.
Remove the handset hook (C) by pushing it upwards, and
insert it in the reversed position so that the small tab (D)
protrudes. The hook will now keep the handset in the cradle
when the phone is wall mounted.
C
D
C
Reconnect the handset and place it in the cradle.
Note!
If the phone is to be used as a desktop phone again,
remember to reverse the position of the handset hook.
5.
6.
7.