DV8 OFFROAD CCJL-01 User manual

CENTER CONSOLE MOLLE
2018+ JEEP JL / 2020+ JEEP JT
CCJL-01
6400 SYCAMORE CANYON BLVD.
RIVERSIDE, CALIFORNIA 92507
855-680-9595
WWW.DV8OFFROAD.COM
PRODUCT
INSTALLATION MANUAL
TOOLS REQUIRED SKILL LEVEL TIME REQUIRED
- #4 Allen Head
-Ratchet/Impact
-Nutsert Tool (optional)
-10mm Wrench
-11/32 Drill Bit or Step Drill bit
-Drill
-Sharpie
Before you install this kit — Read and understand all
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner’s manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
- Easy
- 1 (you) to 2 persons
Little skill level required, you can
easily install it by yourself however,
additional help will be useful
- 1 Hour
Time to install this should only
take about an hour
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
855-680-9595
NEED HELP?

INSTALLATION MANUAL
NEED HELP? 855-680-9595
STEP 1 | With the correct sides
identied, align the molle panel with the
center console.
Use the seam in the panel and the front
edge as a guide for placement.
Using a sharpie, mark the hole locations.
Begin by unpacking all items and inspecting
for missing pieces or damage. If you have any
concerns, please contact the company the
product was purchased from. Extra hardware
may be included with the product.
(6) M6x25mm Bolts
(6) M6 Lock Nuts
(6) M6 Flat Washers
(2) M6 Nutserts
HARDWARE INCLUDED

INSTALLATION MANUAL
NEED HELP? 855-680-9595
STEP 2 | With the holes marked,
use a step bit or 11/32 drill bit to drill the
holes.
STEP 3 | Provided in the hardware kit,
DV8 provided two nutserts, and six nuts.
All mounting points can be through
bolted with the provided nuts, or you can
use the nutserts for the top ones that may
be difcult.
For our install we chose to install the
nutserts on the rear top holes.

INSTALLATION MANUAL
NEED HELP? 855-680-9595
STEP 5 | Using a M6 nutsert tool,
install the nutsert.
STEP 6 | Use your hand to pull the
panel of the center console away from the
vehicle slightly, and using the provided
M6 hardware and #4 allen head, install
the panel until secure.

INSTALLATION MANUAL
NEED HELP? 855-680-9595
STEP 7 | Repeat process for the other
panel.
STEP 8 | Congratulations! You are
done with your JL/JT Center Console Molle
Panels!