Dynojet INVISION INV-1901 User manual

INVISION
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
IINV-1901.01
1INVISION
1DIAGNOSTIC HARNESS
1USB CABLE
2VELCRO
2DYNOJET DECAL
PARTS LIST
Installation Guide for: INV-1901
Model Coverage:
2022-2024 Polaris Pro R
2024 Polaris Xpedition
2024 Polaris XP1000

2 INVISION INSTALLATION GUIDE IINV-1901
INTRODUCTION
INSTALLING THE INVISION
1290.0 4.4
14.2
69.8
Eng Temp
RPM
Volts
TP
F
RPM
V
%
INVISION OVERVIEW—SIDE VIEW
Thank you for purchasing the inVision from Dynojet
Research. At Dynojet, our mission is to make every ride
the ultimate ride. The inVision allows you to view live
data, datalogs, and read/clear DTC’s directly on the
device.
Use the buttons to navigate the device menus, make
selections, cycle through the four full-color available
gauge screens, and log data. Connect to the diagnostic
port for data monitoring; use the USB connection to
interface between the inVision and your computer.
Make your inVision yours; display the channels you
want to see with four user-customizable full-color
gauge screens. Make the inVision your window into
your vehicle; secure the inVision to your dashboard
to monitor any desired set of gauges such as Throttle
Position, Engine Speed, and more. Wideband Air:Fuel
Ratio can be added as a channel to the inVision by adding
the accessories available at www.dynojet.com.
For state of the art technical support, please visit
www.dynojet.zendesk.com.
SCROLL
USB CABLE PORT
CONNECT TO COMPUTER
DIAGNOSTIC CABLE PORT
CONNECT TO VEHICLE
INVISION OVERVIEW—FRONT VIEW
HOME/LOG
SCROLL
ENTER
RETURN
1 Secure the inVision to the vehicle using the supplied
Velcro . Make sure the inVision will not interfere with the
operation and steering of the vehicle.
Visit www.dynojet.com for an array of mounting solutions
for your inVision.
Note: The inVision provides a window into your
vehicle. Mount the inVision to your dashboard and gain
access to customizable full-color gauge screens,
along with data logging and troubleshooting screens.
2 Attach the diagnostic cable to the diagnostic port on the
inVision and to the diagnostic port on the vehicle.
Pro R Models: located under the steering wheel.
Xpedition Models: located under the steering wheel.
XP1000 Models: located under the steering wheel.
DIAGNOSTIC PORTINSTALLATION

3
CONFIGURING GAUGES
Make your inVision yours; display the channels you want to see
with four user-customizable full-color gauge screens. Each
gauge screen has one, two, or four configurable channels.
Monitor channels such as engine temperature or AFR. Sample
gauges shown here.
1 From the Main Menu, select Device Tools>Configure Gauges.
2 Select a gauge screen and press Enter.
3 Select a channel and press Enter.
4 Select a channel from the list and press Enter.
5 Select the precision or units for that channel and press Enter.
6 Continue setting up the remaining channels as desired.
7 Continue configuring the remaining gauge screens as desired.
This menu allows you to read and clear diagnostic trouble
codes.
1 To read codes, select Vehicle Tools>Diagnostics>Active
Codes.
2 To clear codes, select Vehicle Tools>Diagnostics>Clear
Codes.
VIEWING THE DIAGNOSTIC CODES
This menu allows you to view the device status VIN #, Model
ID, ECU serial number, tune compat, and checksum compat.
Select Vehicle Tools>Vehicle Information.
VEHICLE INFO
PAIRED VEHICLE: MG1-GENERIC
PAIRED ECU: MG1-GENERIC
VIN: 3NSNME995RF298728
MODEL ID: 0261S21468
ECU SN: 000250063533
TUNE COMPAT: MG1B260B4E1
CSUM COMPAT: 3508E959
VIEWING THE VEHICLE INFORMATION
14.2
69.8
Eng Temp
F
Volts
V
1290.0 4.4
14.2
69.8
Eng Temp
RPM
Volts
TP
F
RPM
V
%
69.8
Eng Temp
F

4 INVISION INSTALLATION GUIDE IINV-1901
DELETING DATA LOGS
This menu allows you to delete data logs.
1 Select Vehicle Tools>Delete Data Log.
2 Select a specific log to delete or select *Delete All Logs*.
VIEWING THE DEVICE INFORMATION
This menu allows you to view the device firmware version,
serial number, and stock code.
Select Device Tools>Device Information.
DEVICE INFORMATION
DYNOJET INVISION
FW VERSION: 2.32.8747.26426
SERIAL NUMBER: PV00055092
STOCK CODE: 76125052
BL VERSION: 1
HW VERSION: 2
LOG FILES
MG1B260B4E1_LOG_1.wp8
MG1B260B4E1_LOG_2.wp8
*Delete All Logs*
MG1B260B4E1_LOG_3.wp8
REFORMATTING THE DISK
This menu allows you to reformat the disk and erase all data.
Select Device Tools>Reformat Disk.
LOGGING DATA
The inVision is a powerful logging tool to diagnose running issues.
Use the inVision to log all vehicle operating data and review the data
in the Power Core software. Troubleshoot an issue such as knock,
speed/RPM limitation, throttle blade closure and more by keeping the
inVision mounted to view and record channels.
1 Press the Log button to begin logging. The inVision screen will
illuminate a bright red banner across the top when logging.
2 Press the Log button again to stop logging.
3 Use the Power Core software to view log files.
Snapshot Log: Press and hold the Log button for two
seconds to record the previous two minutes of operating time.
69.8
Eng Temp
F
DATALOG SAVED
DATALOG SAVED AS
MG1B260B4E1_LOG_1.wp8

5
UPDATING THE DEVICE
UPDATE DEVICE
PV3_2.32.8747.26426.dfu
This menu allows you to update the device with the latest firmware.
1 Go to www.dynojet.com.
2 Fr om the top navigation menu, select Support>Downloads.
3 Click Power Vision 3.
4 Click the Firmware drop-down and download the Power Vision 3
Firmware for Polaris.
5 Save the file to your device.
6 Select Device Tools>Update Device.
USB MODE
This menu allows you to connect your inVision to your
computer and enables sending and receiving files.
1 Connect the inVision to your computer using the included USB
cable. The inVision will automatically enter USB Mode.
OR
From the Main Menu, select USB Mode.
2 Transfer the desired files to your computer or to the inVision.
USB MODE
USB FILE TRANSFER ENABLED
PRESS TO EXIT
MAIN MENU
DEVICE TOOLS
HELP
USB MODE
CHANGING THE SETTINGS
This menu allows you to rotate the screen allowing you to
change the orientation of the inVision device along with
adjusting the screen brightness. Turn the brightness up and
make your screen pop!
Select Device Tools>Settings>Rotate Screen to flip the
screen.
Select Device Tools>Settings>Brightness to change the
screen brightness.

© 2023 DYNOJET RESEARCH ALL RIGHTS RESERVED
800-992-4993 - DYNOJET.COM
TRUTH
TRUTH
IN
IN
PERFORMANCE
PERFORMANCE