Dynojet Power Commander III User manual

i105-411 2000-2001 Honda RC51 - PCIII USB - 1
2000-2001 Honda RC51
Installation Instructions
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 [phone] www.powercommander.com
Parts List
1Power Commander
1USB Cable
1CD-ROM
1Installation Guide
1Power Adapter
2Power Commander Decals
2 Dynojet Decals
1 Velcro®Strip
1Alcohol Swab
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
The ignition MUST be turned
OFF before installation!
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Button Adjustment Display
Faceplate Buttons
USB Port
Expansion Port

1 Remove the main seat and rear
solo seat cover.
2Prop the front of the fuel tank
up.
3Locate the connector in Fig. A.
Unplug this connector. This
connector is located on the left
hand side of the bike.
4Plug the grey connectors from
the PCIII inline of the stock
connectors (Fig. B)
Fig. AFig. B
i105-411 www.powercommander.com 2000-2001 Honda RC51 - PCIII USB - 2
Unplug this connector
Stock connectors
5Attach the ground wire from the
PCIII to the negative side of the
battery (Fig. C).
Fig. C
Ground wire from PCIII
PCIII connectors

6 With the supplied self adhesive
velcro, attach the PCIII towards
the rear most area of the inner
fender (Fig. E). Use the
supplied alcohol swab to clean
both surfaces before attaching.
Fig. D
i105-411 www.powercommander.com 2000-2001 Honda RC51- PCIII USB - 3