EAE EE-C18E Guide
ModelNo.EE-C18E
Two Post Lift，
Electrical Release
Lifting Capacity 8000KG
Installation, Operation
andPartsManual
Distributed by
Please read this entire manual carefully and completely before installation or operation of the lift.
DATE：0
8
/
1
2
/
2017
Installation, Operation and Parts Manual
EE-C18E
2
IMPORTANTNOTES
Beforestartup,connectingandoperatingEAEproducts,itisabsolutelyessentialthattheoperatinginstructions/owner’smanualand,in
particularthesafetyinstructionsarestudiedcarefully.BydoingsoyoucaneliminateanyuncertaintiesinhandlingEAEproductsandthus
associatedsafetyrisksupfront;somethingwhichisintheinterestofyouownsafetyandwillultimatelyhelpavoiddamagetothedevice,
WhenanEAEproductishandedovertoanotherperson,notonlytheoperatinginstructionsbutalsothesafetyinstructionsand
informationonitsdesignatedusemustbehandedovertotheperson.
Byusingtheproductyouagreethefollowingconditions:
Copyright
TheenclosedinstructionsarethepropertyofEAEoritssupplier,andareprotectedagainstduplicationandreproductionbycopyrightlaws,
internationalagreements,andotherdomesticlegislation.Thereproductionordisclosureofinstructionsoranextractthereofisprohibited
andoffendersareliabletoprosecution;EAEreservestherightorinitiatescriminalproceedingsandassertsclaimsfordamagesintheevent
ofinfringements.
Warranty
Theuseofnon‐approvedhardwarewillresultinamodificationofourproductsandthustotheexclusionofanyliabilityorwarranty,evenif
suchhardwarehasbeenremovedagainintheinterim.
Itisnotpermissibletomakeanychangestoourproductsandthesearenotonlytobeusedtogetherwithgenuineaccessoriesandgenuine
replacementparts.Otherwiseanywarrantyclaimswillbeinvalid.
Liability
TheliabilityofEAEislimittotheamountthatthecustomerhasactuallypaidforthisproduct.Thisexclusionofliabilitydoesnotapplyto
damagescausedthroughwillfulmisconductorgrossnegligenceonthepartofEAE.
Allinformationinthismanualisbelievedtobecorrectattimeofpublication.
EAEreservestherighttoamendandaltertechnicaldataandcompositionwithoutpriornotice.
Pleaseconfirmattimeofordering.
Installation, Operation and Parts Manual
EE-C18E
3
IMPORTANTNOTES...........................................................................................................................................2
SAFETYNOTES...................................................................................................................................................4
1.1Operationofliftingplatforms................................................................................................................................4
1.2Checkingoftheliftingplatforms............................................................................................................................4
1.3Importantsafetynotices........................................................................................................................................5
1.4Warninglabels.......................................................................................................................................................6
1.5Potentialsafetyrisks..............................................................................................................................................7
1.6Noiselevel..............................................................................................................................................................7
PACKING,STORAGEANDTRANSPORTATION.....................................................................................................8
2.1Theliftwasdismantledintothefollowing3partsfortransportation...................................................................8
2.2Storage...................................................................................................................................................................8
2.3Openingthepacks..................................................................................................................................................8
PRODUCTSDESCRIPTIONS.................................................................................................................................9
3.1Generaldescriptions..............................................................................................................................................9
3.2Constructionofthelift...........................................................................................................................................9
3.3Technicaldata........................................................................................................................................................9
3.4Dimensions...........................................................................................................................................................10
3.5Safetydevicesdescriptions..................................................................................................................................11
INSTALLATIONINSTRUCTIONS.........................................................................................................................12
4.1Preparationsbeforeinstallation..........................................................................................................................12
4.2Installationattentions..........................................................................................................................................12
4.3Generalinstallationsteps....................................................................................................................................13
4.4Itemstobecheckedafterinstallation..................................................................................................................19
OPERATIONINSTRUCTIONS.............................................................................................................................19
5.1Precautions..........................................................................................................................................................19
5.2Operationinstructions.........................................................................................................................................20
TROUBLESHOOTING........................................................................................................................................21
INSPECTIONANDMAINTENANCE.....................................................................................................................22
Annex1,Floorplan....................................................................................................................................................24
Annex2,Electricalschemesandpartslist.................................................................................................................25
Annex3,Hydraulicschemesandpartslist.................................................................................................................29
Annex4,Mechanicalexplodeddrawingsandpartslist.............................................................................................32
Installation, Operation and Parts Manual
EE-C18E
4
SAFETYNOTES
1.1Operationofliftingplatforms
Thisliftisspeciallydesignedforliftingmotorvehicles.Usersarenotallowedtouseitforanyotherpurposes.Theapplicablenational
regulations,lawsanddirectivesmustbeobserved.
Onlyusersaged18orabovewhohavebeeninstructedonhowtooperatetheliftingplatformandhaveproventheirabilitytodosotothe
owneraretobeentrustedwithunsupervisedoperationofliftingplatforms.Thetaskofoperatingtheliftingplatformsmustbegrantedin
writing.
Beforeloadingavehicleontothelift,usersshouldstudytheoriginaloperationinstructionsandfamiliarizethemselveswiththeoperating
proceduresinseveraltrialruns.
Liftvehiclewithintheratedload.Don’tattempttoraisevehicleswithexcessiveweight.
1.2Checkingoftheliftingplatforms
Checksaretobebasedonthefollowingdirectivesandregulations:
Basicprinciplesfortestingliftingplatforms
Thebasichealthandsafetyrequirement
Theapplicableaccidentpreventionregulations
Thechecksaretobeorganizedbytheuseroftheliftingplatform.Theuserisresponsibleforappointinganexpertorqualifiedpersonto
performchecking.Itmustbeensurethatthepersonchosensatisfiestherequirements.
Theuserbearsspecialresponsibilityifemployeesofthecompanyareappointedasexpertsorqualifiedpersons.
1.2.1Scopeofchecking
Regularcheckingessentiallyinvolvesperformingavisualinspectionandafunctionaltest.Thisincludescheckingtheconditionofthe
componentsandequipment,checkingthatthesafetysystemsarecompleteandfunctioningproperlyandthattheinspectionlogbookis
completelyfilledin.Thescopeofexceptionalcheckingdependsonthenatureandextentofanystructuralmodificationorrepairwork.
1.2.2Regularchecking
Afterinitialcommissioning,liftingplatformsaretobecheckedbyaqualifiedpersonatintervalsofnotlongerthanoneyear.
Aqualifiedpersonissomebodywiththetrainingandexperiencerequiredtopossesssufficientknowledgeofliftingplatformsandwhois
sufficientlyfamiliarwiththepertinentnationalregulations,accidentpreventionregulationsandgenerallyacknowledgedrulesof
engineeringtobeabletoassessthesafeoperatingconditionofliftingplatforms.
1.2.3Exceptionalchecking
Liftingplatformswithaliftheightofmorethan2metersandliftingplatformsintendedforusewithpeoplestandingundertheloadbearing
elementsoftheloadaretobecheckedbyanexpertpriororreusefollowingstructuralmodificationsandmajorrepairstoloadbearing
components.
Anexpertissomebodywiththetrainingandexperiencerequiredtopossessspecialistknowledgeofliftingplatformsandwhoissufficiently
familiarwiththepertinentnationalworksafetyregulations,accidentpreventionregulationsandgenerallyacknowledgedrulesof
engineeringtobeabletocheckandgiveanexpertoptiononliftingplatforms.
Installation, Operation and Parts Manual
EE-C18E
5
1.3Importantsafetynotices
1.3.1Recommedforindooruseonly.DOnotexposethelifttorain,snoworexcessivemoisture.
1.3.2Onlyusethisliftonasurfacethatisstableandcapableofsusutainingtheload.Donotinstalltheliftonanyasphaltsurface.
1.3.3Readandunderstandallsafetywarningsbeforeoperatingthelift.
1.3.4Donotleavethecontrolswhiletheliftisstillinmotion.
1.3.5Keephandsandfeetawayfromanymovingparts.Keepfeetclearoftheliftwhenlowering.
1.3.6Onlytheseproperlytrainedpersonnelcanoperatethelift.
1.3.7Donotwearunfitclothessuchaslargeclotheswithflounces,tires,etc,whichcouldbecaughtbymovingpartsofthelift.
1.3.8Topreventevitableincidents,surroundingareasoftheliftmustbetidyandwithnothingunconcerned.
1.3.9Theliftissimplydesignedtolifttheentirebodyofvehicles,withitsmaximumweightwithintheliftingcapacity.
1.3.10Alwaysinsurethesafetylocksareengagedbeforeanyattempttoworknearorunderthevehicle.Neverremovesafetyrelated
componentsfromthelift.Donotuseifsafetyrelatedcomponentsaredamagedormissing.
1.3.11Donotrockthevehiclewhileontheliftorremoveanyheavycomponentfromvehiclethatmaycauseexcessiveweightshift.
1.3.12Checkatanytimethepartsofthelifttoensuretheagilityofmovingpartsandtheperformanceofsynchronization.Ensureregular
maintenanceandifanythingabnormaloccurs,stopusingtheliftimmediatelyandcontactourdealersforhelp.
1.3.13Lowerthelifttoitslowestpositionanddoremembertocutoffthepowersourcewhenservicefinishes.
1.3.14Donotmodifyanypartsoftheliftwithoutmanufacturer’sadvice.
1.3.15Iftheliftisgoingtobeleftunusedforalongtime,usersarerequiredto:
a.Disconnectthepower;
b.Emptytheoiltank;
c.Lubricatethemovingpartswithhydraulicoil.
WARNING：Thewarnings,cautionsandinstructionsdiscussedinthisinstructionmanualcannotcoverallpossibleconditionsand
situationsthatmayoccur.Itmustbeunderstoodbytheoperatorthatcommonsenseandcautionarefactorswhichcannotbebuiltinto
thisproduct,butmustbesuppliedbytheoperator.
Installation, Operation and Parts Manual
EE-C18E
6
1.4Warninglabels
Installation, Operation and Parts Manual
EE-C18E
7
1.5Potentialsafetyrisks
1.5.1Mainsvoltage
Insulationdamageandotherfaultsmayresultinaccessiblecomponentsbeinglive
Safetymeasures:
Onlyeverusethepowercordprovidedoratestedpowercord.
Replacewireswithdamagedinsulation.
Donotopentheoperatingunit.
1.5.2Riskofinjury,dangerofcrushing
Intheeventofexcessivevehicleweight,incorrectmountingofthevehicleoronremovingheavyobject,thereisarisk
ofthevehiclefallingoffortippingup.
Safetymeasures:
Theliftisonlyevertobeemployedfortheintendedpurpose.
CarefullystudyandheedalltheinformationgiveninSection1.4.
Observethewarningnoticesforoperation.
1.6Noiselevel
Noiseemittedduringoperatingtheliftshouldbelessthan70dB.Foryourhealthconsideration,itissuggestedtoplaceanoisedetectorin
yourworkingarea.
Installation, Operation and Parts Manual
EE-C18E
8
PACKING,STORAGEANDTRANSPORTATION
Packing,lifting,handling,transportingoperationsmustbeperformedonlybyexperiencedpersonnelwith
appropriateknowledgeoftheliftandafterreadingthismanual.
2.1Theliftwasdismantledintothefollowing3partsfortransportation
NamePackedby Dimension(mm)Weight(kg)/PCSQuantity
Lift‐C18Steelbrackets3200x1400x940 21501
Extensionpost–C18Bubbledfilm2000x500x7302351
Powerunit‐C18Carton1050x200x350281
2.2Storage
Thepacksmustbekeptinacoveredandprotectedareainatemperaturerange0f‐10℃to+40℃.Theymustnotbeexposedtodirect
sunlight,rainorwater.
Stackingthepacks
Weadviseagainststackingbecausethepacksarenotdesignedforthistypeofstorage.Thenarrowbase,heavyweightandlargesizeofthe
packsmakestackingdifficultandpotentiallydangerous.
Ifstackingisunavoidable,useallappropriateprecautions:
‐neverstacktomorethan2metersinheight.
‐nevermakestacksofsinglepacks.Alwaysstackpairsofpacksinacrosspatternsothatthebaseisbiggerandtheresultingstackismore
stable.Oncethestackiscomplete,restrainitusingstraps,ropesorothersuitablemethods.
Amaximumoftwopackscanbestackedonlorries,incontainers,andinrailwaywagons,onconditionthatthepacksarestrappedtogether
andrestrainedtostopthemfalling.
2.3Openingthepacks
Thepackscanbeliftedandtransportedonlybyusinglifttrucks.Neverattempttohoistortransporttheunitusingliftingslings.
Whentheliftisdeliveredmakesurethatithasnotbeendamagedduringtransportationandthatallthepartsspecifiedonthepackinglist
arepresent.
Packsmustbeopenedadoptingalltheprecautionsrequiredtoavoidinjurytopersons(keepatasafedistancewhencuttingthestraps)or
damagetopartsofthemachine(becarefulthatnopartsaredroppedwhileyouareopeningthepacking).
Takespecialcarewiththehydraulicpowerunit,thecontrolpanelandthecylinder.
Installation, Operation and Parts Manual
EE-C18E
9
PRODUCTSDESCRIPTIONS
3.1Generaldescriptions
Theliftispoweredbyanelectro‐hydraulicsystem.Thegearpumpdelivershydraulicoiltooilcylindersandpushesupwardsitspiston.The
pistondrivestoraisethecarriagesandtheliftingarms.Duringliftingprocess,themechanicalsafetylockingunitensuresnoslippingincase
offailurehydraulicsystem.
3.2Constructionofthelift
3.3Technicaldata
Item Technicaldata
Power Electro‐hydraulic
Ratedcapacity 8000
Fullriseheight(mm)1980
Initialadapterheight(mm)125
Fullrisetime（withratedload）≤80S
Fullloweringtime（withratedload）≤60S
Workingpressure(MPa)24
Electricalsupply 380V‐3PH‐50HZ
Motorcapacity(kW)3.5
Oilvolumn(L)14
Noise(db)<75
1.extendingpost
2.powerunit
3.powersidepost
4.crossbeam
5.steelcable
6.secondarypost
7.chain
8.hydrauliccylinder
9.carriage
10.swingarm
Installation, Operation and Parts Manual
EE-C18E
10
3.4Dimensions
Installation, Operation and Parts Manual
EE-C18E
11
3.5Safetydevicesdescriptions
POS.Name Function
1SwingarmlockEnsuretheswingarmsarelockedandavoidbeingswinginginworkingprocess.
2Rubberadapterpad Saferubbercontactwiththewheelbaseofliftedvehicle.
3Feetprotectionbar
Protectuser’sfeetfromenteringintodangerareasthatmaycausepinchingor
shearing.
4Mechanicalsafetylockingunit Catchthecarriagesincaseofhydraulicfailure
5Steelcable Ensurebothcarriagecanworksynchronously.
6Maxheightlimitswitch Stoprisingatmaximumratedheight.
7RoofprotectivelimitswitchStoprisingincasevehiclerooftouchedtheoverheadbar.
Installation, Operation and Parts Manual
EE-C18E
12
INSTALLATIONINSTRUCTIONS
4.1Preparationsbeforeinstallation
4.1.1Spacerequirements.
Referto3.4forthedimensionsofthelift.Theremustalsobeaclearanceofatleast1meterbetweentheliftingplatformandfixed
elements(e.g.wall)inallliftingpositions.Theremustbesufficientspacefordrivingvehiclesonandoff.
4.1.2Foundationsandconnections
Theusermusthavethefollowingworkperformedbeforeerectingthelift.
Constructionofthefoundationfollowingconsultationwiththemanufacturer’scustomerserviceoranauthorizedserviceagent.Routingof
thewiringtotheinstallationlocation.Theusermustprovidefuseprotectionfortheconnection.Electricalsystemconnectionmustbe
donebylicensedtechnicians.Requirementsforpowersupplycableoftheinstallationsite:atleast2.5mm2wirecorefor3Phpowerand
4.0mm2wirecorefor1Phpower.
Referalsotothecorrespondinginformationonthenameplateandintheoperationinstructions.
Beforedoingelectricalconnection,makesuretheliftiselectricallyadapttothelocalpowersupply.
4.1.3Foundationspreparations
RefertoAnnex1forfooting.
C25/30concretebasewithstrengthmorethan3000psi,Minimumthicknessof400mm(continuousfooting).
Surface:Horizontalandeven(Gradientsmax.0.5%)
Newlybuiltconcretegroundmustbeolderthan20days.
4.1.4Toolsandequipmentneededforinstallation
ToolnameSpecificationQuantity
Electricaldrill(C18)24‐25drillbit1
OpenspannerD17‐19mm2
AdjustablespannerbiggerthanD30mm1
Crosssocketscrewdriver PH21
Quickspannerhandleadapter/RatchetREB‐3101
Socketspanner D24mm1
Levellingdevice1mmaccuracy1
Hammer 10pounds 1
Trucklift Capacitymorethan3000KG1
Liftingstring Capacity,1000KG 2
Torquespanner MD4001
4.2Installationattentions
4.2.1Jointsofoilhoseandwiringmustbefirmlyconnectedinordertoavoidleakageofoilhoseandloosenessofelectricalwires.
4.2.2Allboltsshouldbefirmlyscrewedup.
4.2.3Donotplaceanyvehicleontheliftinthecaseoftrialrunning.
Installation, Operation and Parts Manual
EE-C18E
13
4.3Generalinstallationsteps
ONLYTRAINEDANDQUALIFIEDINSTALLERSCANPERFORMLIFTINSTALLATIONDUTIES.
Step1:Removethepackagingandtakeouttheaccessoriesattached.
Attention
：
Thepacksmustbeopenedadoptingalltheprecautionsrequiredtoavoidinjurytopersons(keepatasafedistancewhencutting
thestraps)ordamagetopartsofthemachine(becarefulthatnopartsaredroppedwhileyouareopeningthepacking).
Usepropermeans(putsomethingsupportingunderthepostorsuspendthepostbyacrane)tosuspendthepost,unsrewandremove
theboltsfixedontheironrack.
Attention
：
Pleasepayspecialattentionnottoletthepostfalldownforitmaycausecasualtyorbringdamagestotheaccessoriesfixedinthe
post.
Step2:Fixthestandingpositionforthetwoposts.(seeAnnex1,floorplan)
1.Decideonwhichpostthepowerunitisgoingtobemounted.
2.Drawanoutlineofthebaseplateontheinstallationgroundwithchalkandascertainthepositionforthetwoposts.
Step3:Connectextendingposts.
1.Hexbolt
2.Ironrack
1.HexnutM14
2.FlatwasherM14
3.SpringwasherM14
4.HexheadfullswivelscrewM14*30
Installation, Operation and Parts Manual
EE-C18E
14
Step4:Erectandsecurethepost.
1.Makethepostsfacetoeachotherandthedistancebetweenthepostsequalstothelengthoftheoverheadcrossbeam.Useproper
meanstoeretthepost.
2.Checkthepositionofthebaseplatesagain.
3.Drillthemountingholes.Removethedrillingdustfromthehole.
4.Useaspiritleveltochecktheverticalalignmentoftheposts.Ifnecessary,placeequalizingplatesunderthebaseplates.Theequalizing
platesmustbeofthesamelengthasthesideofthebaseplaterestingonthem.Otherwisetheloadofthebaseplatewillnotbetransferred
evenlytothefoundation.
5.Erectandsecuretheotherpostsimilarly.
Step5:Connectcrossbeam.
1. HexnutM14 6.Crossbeam(in)
2.FlatwasherM14 7.HexsocketcylinderheadscrewM6*30
3.SpringwasheM148.HexnutM6
4.HexheadfullswivelscrewM14*39.Protectiverod
5.Crossbeam(out)10.Extendingpost
Installation, Operation and Parts Manual
EE-C18E
15
Step6:Connectthesynchronizationsteelcable.
1.Routeandfixaccordingtothefollowingscheme
2.Beforeattemptingtoroutethecables,raisetheliftingcarriageatbothsidestothefirstlatchingpositionmakingsurethatthemechanical
safetylockingunitsineachpostarefullyengaged.
3.Afterfixedthecables,adjustandmakethecablesatbothsidesbewiththesametightnesswhichcouldbejudgedbythesoundemitted
duringliftingprocess.
4.Greasethecableafterbeingfixed.(Itisamust.)
Step7:Connectthehydraulicsystem.
1.Installhydraulicpowerunitontothepowersidepost.
1.HexnutM10
2.FlatwasherM10
3.SpringwasherM10
4.Anti‐virbrationpad
5.HexheadfullswivelscrewM10*30
1.SteelropeA
2.SteelropeB
Installation, Operation and Parts Manual
EE-C18E
16
2.Connectoilhosestothe“T”connectorinthepowersidepost.
NOTE:makesuretheconnectorsandhosesareclean.
Step8:Connectelectricalsystem.
RefertoAnnex2beforedoingtheconnction.
Readthenameplateandcheckthatthesupplyvoltageisadaptedtothevoltageofthelift.
1.Fixmaxheightlimitswitchontotheinsidesurfaceofthemainpostandconnectitswiretotheterminalsreservedinthepost.
1.Oilhose1
2.Oilhose2
3.Powerunit
4.Oilhose3
5.Oilcylinder
1.Maxheightlimitswitch
2.CrosssocketcapheadscrewM4*12
3.CrosssocketcapheadscrewM4*25
4.Wire
Installation, Operation and Parts Manual
EE-C18E
17
2.Fixmaxheightlimitswitchontotheinsidesurfaceofthemainpostandconnectitswiretotheterminalsreservedinthepost.
3.Connectthewiresofelectromagnets.Removethecoverbeoremakingtheconnection.
Step9:Installliftingarms.
Thearmpinshafts(No.2)mustbegreasedattheinstallation.
Installtheliftingarmsontothecarriagesandensurethearmlockcouldwork.
Attention:InstallLiftingarmsandfixfeetprotectionbarsONLYafterthecompleteassemblyhasbeenerectedandanchored.
1.Limitswitch
2.HexsocketscrewM4*25
3.Wire
Installation, Operation and Parts Manual
EE-C18E
18
Step10:Fillwithhydraulicoil.
ONLYCLEANANDFRESHOILONLY
Liftmustbefullyloweredbeforechangingoraddinghydraulicoil.
Prepare14litersofhydraulicoil.Fillabout12litersintotheoiltanktoruntheliftupanddownfor2or3timesaftertheelectricalsystemis
connectedandthenfillintotherest2liters.
Note：ItissuggestedtouseNO.46hydraulicoilwhenaveragetemperatureofthelocationisabove18degreeCelsiusandusingNO.32
hydraulicoilwhentemperatureisbelow18degreeCelsius.
Changetheoil6monthsafterinitialuseandchangeonceperyearthereafter.
Step12:Trialrunning.
Getfamiliarwithliftcontrolsbyrunningtheliftthroughafewcyclesbeforeloadingvehicleonlift.
Thisstepisofparticular
importanceforitcancheckiftheoilhoseiswellconnected.Theconnectionisqualifiedwhenthereisnoabnormalsoundorleakageafter
havingbeentestedfor5‐6times.
Iftheliftdoesn'traise,themotormayturninthewrongdirection.Insuchevent,interchangewiresU,Vintheconnectionbox.
Bleedingthehydraulicsystem
Unscrewbutdon'tremovethenutontopoftheoilcylinderandslightlypresstheUPbuttonuntiloilgetsout.Screwthenuttight
thereafter.
Afterbleedingsystem,fluidlevelinpowerunitreservoirmaybedown.Addmorefluidifnecessarytoraiselifttofullheight.Itisonly
necessarytoaddfluidtoraiselifttofullheight.
Checkthesynchronizationofbothliftingcarriages.
Ensurethesynchronizationbyadjustingthebalancesteelcablesatbothsides.Makebothcablesbeofthesametightness.
Thiscouldbejudgedbythesoundemittedbythesafetylockingunitduringliftingprocess.
Checkthemechanicalsafetylockingunit.
Checkifitssafetylockinghookscanbeeffectivelyengagedorreleasedintherunningprocess.
1.Liftingarm
2.Armpinshaft
3.Feetprotectionfender
4.HexsocketcapheadscrewM8*12
Ventairremainedinthec
y
linder
Installation, Operation and Parts Manual
EE-C18E
19
4.4Itemstobecheckedafterinstallation
S/NCheckitemsYESNO
1Screwtorqueofexpansionbolts:110N•m;√
2Risingspeed≥20mm/s;√
3Noisewithratedload≤75db;√
4Groundingresistance:notbiggerthan4Ω;√
5Heightdifferenceofthetwocarriages≤5mm; √
6Mechanicalcatchunitisrobustandsynchronizedwhenrunningwithratedload;√
7Ifthecontrolbuttonworksas“holdtorun”? √
8Iflimitswitchesworkwell?√
9Ifgroundingwireisconnected? √
10Ifrisingandloweringsmoothly? √
11Ifthereisnoabnormalnoticeduringrunningwithratedload? √
12Ifthereisnooilleakagewhenrunningwithratedload? √
13Ifexpansionbolts,nutsorcirclipsarewellsecured? √
14Ifthemaxliftingheightis1980mm?√
15IfSafetyadvices,nameplateandlogosareclear?√
OPERATIONINSTRUCTIONS
5.1Precautions
5.1.1Checkallconnectionsofoilhose.Onlywhenthereisnoleakage,theliftcanstartwork.
5.1.2Thelift,ifitssafetydevicemalfunctions,shallnotbeused.
5.1.3Itshallnotliftorloweranautomobileifitscenterofgravityisnotproperlypositioned.
5.1.4Operatorsandotherpersonnelconcernedshouldstandinasafetyareaduringliftingandloweringprocess.
5.1.5Whentheliftisraisedtotheexpectedheight,checkagainthestabilitybeforedoingserviceormaintenanceworkunderneath.
Installation, Operation and Parts Manual
EE-C18E
20
5.2Operationinstructions
Toavoidpersonalinjuryand/orpropertydamage,permitonlytrainedandqualifiedpersonneltooperatethelift.After
reviewingtheseinstructions,getfamiliarwithliftcontrolsbyrunningtheliftthroughafewcyclesbeforeloadingvehicleon
lift.Alwaysliftthevehicleusingallfouradapters.Neverraisejustoneend,onecorneroronesideofvehicleadapters.
Raisethelift
Makesurevehicleisneitherfrontnorrearheavyandcenterofbalanceshouldbemidwaybetweenadaptersandcenteredoverthe
lift.
1.Parkthevehiclebetweentwoposts.
2.Adjusttheliftingarmsuntilliftingadaptersareunderthepick‐uppositionsofthevehicleandmakesurethegravityofvehiclelocated
overthecenteroffourliftingarms.
3.Turnonthemainpowerswitchandpushthe”UP”buttononthecontrolboxuntilliftingadaptershavetouchedthepick‐uppositionsof
vehicle.
4.Keeponraisingthevehiclemakingitswheelshaveabitclearanceoffthegroundandcheckagainthestability.
5.Raisethevehicletotheexceptedheight,pushtheLOCKbuttontoengagethemechanicalsafetylockingunit.Checkagainthestability
beforedoingmaintenanceorrepairworkunderneath.
Lowering
Whenloweringtheliftpaycarefullattentionthatallpersonnelandobjectsarekeptclear.
1.PUSHtheDOWNbutton.
2.Whentheliftisfullylowered,positiontheliftarmsandadapterstoprovideanunobstructedexitbeforeremovingvehiclefromliftarea.
3.Drivethevehicleaway.
POS.Name Function
QSMainpowerswitch Controlonoroffofthemainpower.
HLPowerindicator Indicatepowerconnection.
SB1UPbutton Controlascentmovement.
SB2DOWNbutton Controldescentmovement.
SB3APSbutton WokewithSB2fordirectdescent.
SB4LOCKbutton Engagethemechanicallock.
Table of contents
Other EAE Lifting System manuals
Popular Lifting System manuals by other brands
REID LIFTING
REID LIFTING Tuffbuilt Pro Series Assembly & Operation guide
Braun
Braun 04 Series Service manual
BlitzRotary
BlitzRotary Master Gear 1 operating instructions
AMGO Hydraulics
AMGO Hydraulics OH-10 Installation and service manual
RUTHMANN
RUTHMANN ECOLINE RS200 Use and maintenance manual
Vestil
Vestil LM-HP Series quick start guide
