Ecleris MICROSTAR C100 User manual

USER MANUAL
MICROSTAR SERIE C100
COLPOSCOPE
ABOUT THIS MANUAL
Version: 2019.04.01
Year: 2019
Language: English
All the rights to this manual are reserved, especially reproduction, publication and translation rights. No portion of this manual may be
reproduced by no means (photocopy, microfilm or other methods) without previous written authorization from ECLERIS. Neither can it
be reproduced, multiplied or published through any electronic data processing form.
The information contained in this manual may be modified or broaden without previous notification, without it representing any
responsibility to ECLERIS.
EUSA GLOBAL Llc.
11801 NW 100th Rd
Suite 17
Medley, FL 33178, U.S.A.
Phone: [phone]
CMC Medical Devices & Drugs S.L.
C/ Horacio Lengo Nº18, CP29006, Málaga,
Spain
Ph. [phone]
Email: [e-mail]

USER MANUAL –COLPOSCOPE C100
Page 2of 32
INMANUUIN161 Rev.2019.04.01 / ENG
TABLE OF CONTENT
1. SYMBOLS................................................................................................................................4
2. SAFETY INFORMATION.........................................................................................................4
2.1 WARNINGS..........................................................................................................................4
3. DESCRIPTION.........................................................................................................................5
3.1 INTENDED USE...................................................................................................................5
3.2 INTENDED USER ................................................................................................................5
3.3 DESCRIPTION AND COMPONENTS ..................................................................................5
3.3.1 FLOOR STAND –PARALLEOLOGRAM ARM MODEL –C-100F.................................6
3.3.2 WALL-MOUNTED PARALLELOGRAM ARM MODEL –C-100W..................................7
3.3.3 GYN CHAIR MOUNT COLPOSCOPE MODEL –C-100T..............................................7
3.3.4 FLOOR STAND –TELESCOPIC COLUMN MODEL –C-100A5E.................................8
3.3.5 COMPLETE HEAD......................................................................................................10
3.3.6 LIGHT SOURCE..........................................................................................................10
3.3.6.1 LED LIGHT SOURCE..............................................................................................10
3.3.6.2 XENON LIGHT SOURCE.........................................................................................10
3.3.6.3 HALOGEN LIGHT SOURCE....................................................................................11
3.3.7 COMPATIBLE ACCESORIES.....................................................................................11
4. INSTALLATION AND SET UP ...............................................................................................12
4.1 FLOOR STAND - PARALLELOGRAM ARM MODEL –C-100F..........................................12
4.1.1 LIGHT SOURCE..........................................................................................................14
4.2 WALL-MOUNTED PARALLELOGRAM ARM MODEL –C-100W.......................................15
4.3 GYN CHAIR MOUNT –C-100T..........................................................................................17
4.4 FLOOR STAND - TELESCOPIC COLUMN MODEL –C-100A...........................................17
4.5 FOCAL LENS MOUNTING.................................................................................................19
4.6 BEAM SPLITTER AND CAMERA INSTALLATION.............................................................20
4.6.1 IMAGE ORIENTATION...................................................................................................21
4.7 REVISION..........................................................................................................................22
5. OPERATION –FUNCTIONS .................................................................................................22
5.1 LIGHT SOURCE.................................................................................................................22
5.2 INTERPUPILLARY DISTANCE ADJUSTMENT..................................................................23
5.3 DIOPTRIC CORRECTION ADJUSTMENT.........................................................................23
5.4 MAGNIFICATION VARIATION...........................................................................................23

USER MANUAL –COLPOSCOPE C100
Page 3of 32
INMANUUIN161 Rev.2019.04.01 / ENG
5.5 COLOR FILTER .................................................................................................................23
6. MANIPULATION AND MOVEMENTS....................................................................................23
6.1 FOREARM MOVEMENT....................................................................................................23
6.2 PARALLELOGRAM ARM MOVEMENT..............................................................................23
6.3 HEAD ROTATION AXIS.....................................................................................................24
6.4 HEAD TILT.........................................................................................................................24
6.5 SHIPMENT.........................................................................................................................24
7. MAINTENANCE.....................................................................................................................24
7.1 CLEANING.........................................................................................................................25
7.1.1 CLEANING THE EXTERNAL SURFACES..................................................................25
7.1.2 CLEANING OF OBJECTIVE LENS AND EYEPIECES................................................25
7.2 ELECTRICAL CONNECTIONS..........................................................................................25
7.3 LAMP CHANGE .................................................................................................................25
7.4 FUSE CHANGE..................................................................................................................26
7.5 FIBER OPTIC CABLE CHANGE ........................................................................................27
8. TECHNICAL SPECIFICATIONS............................................................................................28
9. TROUBLESHOOTING...........................................................................................................30
10. TECHNICAL SERVICE.......................................................................................................31
11. WARRANTY.......................................................................................................................31

USER MANUAL –COLPOSCOPE C100
Page 4of 32
INMANUUIN161 Rev.2019.04.01 / ENG
1. SYMBOLS
Read the related documentation
CE mark
Warning!
Manufacturers information
(Name, Address)
Alternate current
Type of applied BF
equipment
Protect from water
Do not discard with the
household waste
This side up
Protective Earth (Ground)
Environmental transport conditions
Equipotentiality
Fragile
I
ON
Serial number
OFF
Manufacturing date (MM/YYYY)
Catalogue number
2. SAFETY INFORMATION
2.1 WARNINGS
It is very important to read carefully this manual before using the Ecleris Microstar C-100
Colposcope.
The Ecleris Microstar C-100 Colposcope is an electrical device that provides very high light
intensity. Its use is recommended exclusively for trained personnel.
ECLERIS will not assume any liability for damages that may occur if the device is used without
following the instructions and/or ignoring the following advice:
Keep the device out of children reach.
Do not install the device close to heat sources like stoves.
Do not use the colposcope in places where there is explosion danger.
Always install the device on top of firm and horizontal surfaces, on a perfect ventilated
area.
Do not block the ventilation screens. This ventilation must assure good air flow.
Avoid device exposure to direct sun light, dust, humidity, vibration or shock.
Do not put any container with liquids on top of the device; do not expose the device to
rain or sun.
Do not bend or tied a nut on the power cable, or any cable connected to the device.
Do not use the device during thunderstorms.
After the use of the device, turn it off and disconnect the power cable.
In order to avoid Electrical shocks this system must be connected to a power grid with
proper ground connection. (No exceptions)
This system is not designed to be used in the presence of inflammable anesthetic gases
mixture with air, oxygen, nitrous oxide, or ambient with high oxygen content.

USER MANUAL –COLPOSCOPE C100
Page 5of 32
INMANUUIN161 Rev.2019.04.01 / ENG
The device is provided with a connectable power cable that assures proper electrical
isolation on the grid.
In the case of electromagnetic interference between medical device and other electrical
device, we recommend to increase the distance between the systems in order to
minimize the interference effects.
Do not open the device. The diagnostics, service and repairment must be performed by
ECLERIS, or a company authorized by ECLERIS. ECLERIS will not be liable for the
damage caused by repairment, or service performed by unauthorized personnel.
In case of any problem, the system must be laid a plane surface and power cable
disconnected.
The device must be used only by personnel informed of all this warnings.
Any use outside of the manufacturer specific intent use, will exclude ECLERIS of all
liability.
This user manual must be with the device for permanent review. If the system is sold or
donated, the user manual must be delivered with the device.
Although the light source does not damage the eyes, it is recommend not to look directly
into the light channel or the end of the colposcope and handling it according to
instructions.
If as a consequence of:
Inadequate use of the equipment.
No use of this manual.
Poor care and maintenance of the equipment.
Repair and manipulation by unauthorized personnel.
…any material or personal damage were caused to third parties, ECLERIS, the manufacturer and
the supplier of the equipment, shall not assume any responsibility for such damages.
Do not dispose the device, or any of the accessories with the domestic waste.
Research the local rules and laws for proper disposal. It is the user responsibility to
deliver the system to the proper location for disposal or recycle of electrical and
electronic device or contact the manufacturer or authorized representative to
proceed on the elimination of the system on a safe and ecological way.
3. DESCRIPTION
3.1 INTENDED USE
The Ecleris Microstar C-100 Colposcope has been designed for gynecological diagnosis
observations.
3.2 INTENDED USER
The device has been designed to be used by medical, paramedical or health professionals
3.3 DESCRIPTION AND COMPONENTS
Carefully unpack the accessories and remove them from their packing. Check for missing items
and evidence of shipping damage. File any complaints with the manufacturer or supplier
immediately. Retain the original packing materials for later use. These can come handy when the
equipment must be transported.

USER MANUAL –COLPOSCOPE C100
Page 6of 32
INMANUUIN161 Rev.2019.04.01 / ENG
The Ecleris Microstar C-100 Colposcope includes the following necessary components. Please
identify and check them before you proceed with the installation:
3.3.1 FLOOR STAND –PARALLEOLOGRAM ARM MODEL –C-100F
Components:
4 Wheels with brakes
1 Base and column
1 Complete pantograph arm
1 Light source
1 Head with 1 objective lens
1 Binocular
2 Eyepieces
1 Fiber optic cable
1 3 meters AC interlock cable
1 Cover
1 User’s manual
1 3/16” Allen key
1 4 mm Allen key
1. Eye piece
2. Binocular
3. Head
4. Regulation of head rotation
command
5. Fiber optic cable
6. Parallelogram arm
7. Column
8. Wheels with brake
9. Head fork pole
10. Parallelogram arm brake
11. Weight compensation command
12. Forearm
13. Double light source
14. Base

3.3.2 WALL-MOUNTED PARALLELOGRAM ARM MODEL –C-100W
Components:
1 Wall mount
4 Wall anchors with 4 bolts
1 Complete pantograph arm
1 Light source
1 Head with 1 objective lens
1 Binocular
2 Eyepieces
1 Fiber optic cable
1 3 meters AC interlock cable
1 Wall-mount power cable
1 Cover
1 User’s manual
1 3/16” Allen key
1 4 mm Allen key
1. Parallelogram arm brake
2. Weight compensation command
3. Parallelogram arm
4. Fiber optic cable
5. Double light source
6. Eye piece
7. Binocular
8. Head fork pole
9. Head
10. Regulation of head rotation
command
11. Forearm
12. Wall mount
3.3.3 GYN CHAIR MOUNT COLPOSCOPE MODEL –C-100T
Components:
1 Gyn Chair support
1 Complete pantograph arm
1 Light source
1 Head with 1 objective lens
1 Binocular

USER MANUAL –COLPOSCOPE C100
Page 8of 32
INMANUUIN161 Rev.2019.04.01 / ENG
2 Eyepieces
1 Fiber optic cable
1 3 meters AC interlock cable
1 Cover
1 User’s manual
1 3/16” Allen key
1 4 mm Allen key
1. Parallelogram arm brake
2. Weight compensation command
3. Parallelogram arm
4. Fiber optic cable
5. Double light source
6. Eye piece
7. Binocular
8. Head fork pole
9. Head
10. Regulation of head rotation
command
11. Forearm
12. Gyn Chair support
3.3.4 FLOOR STAND –TELESCOPIC COLUMN MODEL –C-100A5E
Componentes:
1 Base with wheels
1 Telescopic Column
1 90° Arm
1 Everlux Mini Light Source
1 Head with 1 objective lens
1 Binocular
2 Eyepieces
1 Fiber optic cable
1 3 mts. Power cable
1 Cover
1 User’s manual
1 10 mm Allen key
1 4 mm Allen key

USER MANUAL –COLPOSCOPE C100
Page 9of 32
INMANUUIN161 Rev.2019.04.01 / ENG
1. Head
2. Head handle
3. Fiber optic cable
4. Regulation of head rotation
command
5. Regulation of elbow rotation
command
6. Height brake
7. Wheels
8. Eye piece
9. Binocular
10. Elbow (90° piece)
11. LED light source
12. Column
13. Base

USER MANUAL –COLPOSCOPE C100
Page 10 of 32
INMANUUIN161 Rev.2019.04.01 / ENG
3.3.5 COMPLETE HEAD
1. Magnification selector
2. Micro focus adjustment
3. Objective lens
4. Green filter
5. Head handle
6. Fiber optic cable
7. Eyepiece rubber
8. Eyepiece
9. Binocular body
10. Head body
11. Balance movement control
12. Head fork pole
3.3.6 LIGHT SOURCE
3.3.6.1 LED LIGHT SOURCE
See the manual of the LED light source EVERLUX ECLERIS
3.3.6.2 XENON LIGHT SOURCE
See the manual of the xenon light source XENOLUX ECLERIS.

USER MANUAL –COLPOSCOPE C100
Page 11 of 32
INMANUUIN161 Rev.2019.04.01 / ENG
3.3.6.3 HALOGEN LIGHT SOURCE
1. Fiber
optic cable connector
2. Diaphragm control
3. Lamp selector switch
4. Video camera connector
5. On/off switch
6. AC interlock cable connector
7. Fuse box
8. V
entilation grids
9. Ecleris Endodigi Connector (Image
and video capture) and other
peripheral devices*
10. S-Video output (SVHS)
11. Video output
12. Voltage selector (110/220V)
* Standard output (Normally-Open) to remotely operate other image capture devices such
as Video Printers
3.3.7 COMPATIBLE ACCESORIES
LED Light source Everlux.
Double light source HALOLUX 150
- DUO.
Beam splitter.
Digital photographic camera
adapter.
Converter of beam splitter to
endocoupler C-Mount
Stand for LCD monitor
Universal stand for GYN table
45º inclined binocular.
Straight binocular.
CCD Video Camera (NTSC/PAL).
Eyepieces 10X.
200 mm Objective lens.
250 mm Objective lens.
300 mm Objective lens.
400 mm Objective lens.
Cover.
Autoclavable covers kit (handles
and knobs).
Digital capturing and documentation
system –Ecleris ENDODIGI.

4. INSTALLATION AND SET UP
Experienced personnel is not required for the installation of the Ecleris Microstar C-100
Colposcope. Additionally to the provided tools, for the installation of the Floor Stand -
Parallelogram Arm Model (C-100F) you will need 13 mm and 27 mm wrenches or an adjustable
wrench. For the Wall-Mounted Parallelogram Arm Model (C-100W) you will also need an electric
drill, a 12mm widia drill bit and a 1/2’’ socket wrench.
To avoid accidents while handling heavy parts of the equipment, two people should
perform the installation of the Colposcope, carefully following the enclosed instructions.
Once the installation is over, please continue with the procedures detailed in the Revision section.
4.1 FLOOR STAND - PARALLELOGRAM ARM MODEL –C-100F
1) Insert the 27mm bolt as shown in the picture.
2) Tighten the 27mm bolt to the column as shown in the
picture using a socket, fixed or adjustable wrench.
3) Loosen the 3 screws at the column’s receiving end with the 3/16” Allen wrench. Place the
colposcope’s arm, as shown in the figure. You must achieve a perfect fit with the column.
Fully tighten the 3 screws.

USER MANUAL –COLPOSCOPE C100
Page 13 of 32
INMANUUIN161 Rev.2019.04.01 / ENG
4) Introduce the head fork pole and its Teflon washer into the receiver at the end of the
parallelogram arm and adjust the security notch firmly.
5) Place the binocular in the matching binocular support, verifying that the marks are aligned.
Adjust the binocular screw to achieve the best possible seat.
6) Attach the eyepieces to the binocular. Spread the rubber protectors surrounding the
eyepieces.

USER MANUAL –COLPOSCOPE C100
Page 14 of 32
INMANUUIN161 Rev.2019.04.01 / ENG
Note: If the user wears eyeglasses, leave the rubber protectors folded.
7) Pass the fiber optic cable connector through the parallelogram arm cover and connect it to the
head l.
8) If necessary, once the colposcope has been installed, regulate the weight compensation
command, located at the proximal end of the parallelogram arm.
4.1.1 LIGHT SOURCE
1) Locate the light source under the forearm, as shown in the picture.

USER MANUAL –COLPOSCOPE C100
Page 15 of 32
INMANUUIN161 Rev.2019.04.01 / ENG
2) Set the guide lugs in the holes on the upper cover of the light source.
3) Slide the light power supply backwards and then tighten the 4mm Allen screws.
Note: The mounting procedure is the same for both the LED light source and the Halogen light
source.
Lamps may move during the shipment of the colposcope. Before turning on the light
source please verify the correct positioning of the lamps and their alignment with the fiber
optic cable connector.
If you detect any abnormality before you start operating the Ecleris Microstar C-100
Colposcope, please contact the technical department of your local distributor or nearest
ECLERIS office prior to using the colposcope on patients
4.2 WALL-MOUNTED PARALLELOGRAM ARM MODEL –C-100W
Before you proceed with the installation, you must decide the adequate height for the wall-mount,
as well as the correct leveling.
The wall-mounted model must be fixed only to high resistance walls.
You should not fix the wall-mount to walls made of hollow bricks or walls with less than
15 cm thickness, or plaster panels, wooden walls or other low resistance material.
We recommend that you consult with a construction specialist, to analyze the correct
support mounting.
1) Mark a 17 cm (7”) long horizontal line on the wall, perfectly leveled to the floor at a height of
125 cm (49.2”).
2) Place the wall mount on the line, aligning the straight lower part of the wall-mount with the
drawn line. Verify with a level that it is horizontal.

USER MANUAL –COLPOSCOPE C100
Page 16 of 32
INMANUUIN161 Rev.2019.04.01 / ENG
3) Mark with a pencil the place on the wall where the upper right hole of the wall-mount is, to
use as a reference.
4) With an impact electric drill and a 12mm widia drill bit, drill the upper right hole, introduce the
wall anchor and fix the wall-mount with the bolt. Thoroughly tighten the bolt with a 1/2’’ socket
or adjustable wrench.
5) Once the upper right corner is fixed you must repeat steps 3 and 4 for the upper left corner,
and then the remaining lower corners.
To achieve correct operation check that the leveling is correct before drilling the wall.
6) The wall-mount should remain firm. Verify it by testing its resistance loading a weight eight
(8) times heavier than the total weight of the colposcope.
ECLERIS is not responsible for any physical or equipment damage that may occur due to
the incorrect fixation of the wall-mount.
7) Loosen the 3 screws at the wall-mount’s receiving end with the 3/16” Allen wrench.
Lift and place the colposcope’s forearm as shown in the picture. You must achieve a perfect fit
with the wall-mount. Tighten up the 3 screws on the wall-mount.
Finally, verify that the procedure has been correctly performed by rotating the arm around the
support in both directions, until you reach the end. The movement is limited to an arc of 170º
8) Connect one end of the wall-mount power cable from the light source to the upper connector
of the wall-mount and the 3 meters AC interlock cable from the connector underneath the wall
mount to the electric power network.
For proper visualization of the electrical connections, the wall-mount is shown
without the forearm.
9) Follow steps 5 thru 9 from 4.1 section for head, binocular, eye pieces and lamp source
installation

USER MANUAL –COLPOSCOPE C100
Page 17 of 32
INMANUUIN161 Rev.2019.04.01 / ENG
4.3 GYN CHAIR MOUNT –C-100T
1) Remove the 4 Allen screws using a 5mm key in order to attach the stand to the Gyn chair and
tighten them firmly.
2) Get the 3 Allen screws loose from the stand by using a 3/16” Allen key provided.
3) Place the colposcope forearm achieving a perfect fit with the gyn chair stand. Fully tighten the
3 screws on the gyn chair stand.
4) Follow steps 5 thru 9 from 4.1 section for head, binocular, eye pieces and light source
installation.
4.4 FLOOR STAND - TELESCOPIC COLUMN MODEL –C-100A
1) Place the colposcope’s base in a vertical position.
2) Insert the column into the base and hold it by mean of the provided 10mm Allen screw. Place
the washer between the screw and the base as shown in the picture below.
3) Stand the base on the floor and insert the 90° arm into the column.
4) Attach the light source to the column using the 4 Phillips screws provided.

USER MANUAL –COLPOSCOPE C100
Page 18 of 32
INMANUUIN161 Rev.2019.04.01 / ENG
5) Insert the head fork into 90° arm.
6) Place the binocular in the matching binocular support, verifying that the marks are aligned.
Adjust the binocular screw to achieve the best possible seat.
7) Attach the eyepieces to the binocular. Unfold the rubber protectors surrounding the
eyepieces.
Note: If the user wears eyeglasses, leave the rubber protectors folded.

USER MANUAL –COLPOSCOPE C100
Page 19 of 32
INMANUUIN161 Rev.2019.04.01 / ENG
8) Attach one end of the fiber optic cable to the light source and the other end to the head.
If you detect any abnormality before you start operating the Ecleris Microstar C-100A5E
Colposcope, please contact the technical department of your local distributor or nearest
ECLERIS office prior to using the colposcope on patients.
4.5 FOCAL LENS MOUNTING
Screw the lens to the head, tightening until the micro focus adjustment reaches the desired
position. Counterscrew the nut for proper fixation of the lens.

USER MANUAL –COLPOSCOPE C100
Page 20 of 32
INMANUUIN161 Rev.2019.04.01 / ENG
4.6 BEAM SPLITTER AND CAMERA INSTALLATION
1) Remove the binocular if it is already placed.
2) Tightly screw the camera to the beam splitter until its end.
Do not over tight the video camera to the beam splitter in order to avoid mechanism
damage.
3) Place the beam splitter with the camera verifying that the marks are aligned. Adjust the
beam splitter screw to achieve the best possible seat.
4) The same way, place the binocular on top of the beam splitter.
5) Remove the fiber optic cable from the colposcope’s arm.
6) Introduce the camera’s cable in the head through the cover of the parallelogram arm.
7) Introduce once again the fiber optic cable through the colposcope’s arm. Connect the fiber
optic cable to the head.
8) Connect the fiber optic cable at the front of the light source pushing it forwards.
9) Connect the video cable to the video output on the light source.
10) Connect the other end of the video cable to the monitor’s video input (Video IN).
11) Turn on the light source and monitor.
12) Locate the head at the working distance according to the focal lens (200, 250, 300 or 400
mm) and focus a flat image or object. Working distance must be measured from the focal lens
to the object. It is very important to use a flat object or image during this procedure.
13) Set the oculars to its middle position (no dioptrics correction).
14) Rotate the magnification selector up to the maximum factor (2.5X).
15) Looking through binoculars, focus the image using the micro-focus knob until all
magnifications are in focus (parafocusing).