Elo TouchSystems Entuitive 192XL-XXWA-1 Series User manual

Elo Entuitive Touchmonitor User Guide 1

Elo Entuitive Touchmonitor
User Guide
19”LCD Desktop Touchmonitor 1925L Series
Revision B
P/N 008585
Elo TouchSystems, Inc.
1-800-ELOTOUCH www.elotouch.com
Elo Entuitive Touchmonitor User Guide 2

Elo Entuitive Touchmonitor User Guide 3
Copyright © 2004 Elo TouchSystems Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form
or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems.
Disclaimer
The information in this document is subject to change without notice. Elo TouchSystems makes no representations or warranties with respect to the contents hereof, and
specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo TouchSystems reserves the right to revise this publication and to
make changes from time to time in the content hereof without obligation of Elo TouchSystems to notify any person of such revisions or changes.
Trademark Acknowledgments
IntelliTouch, SecureTouch, AccuTouch, Entuitive, and MonitorMouse are trademarks of Elo TouchSystems, Inc.
Other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Elo TouchSystems claims no interest in trademarks
other than its own.
iii

Table of Contents
CHAPTER 1 - INTRODUCTION..................................................................................................9
Precautions....................................................................................................................................7
About the Product..........................................................................................................................7
CHAPTER 2 - INSTALLATION AND SETUP............................................................................9
Unpacking Your Touchmonitor.....................................................................................................9
Product Overview......................................................................................................................11
Touch Interface Connection Figure 2.1............................................................................
Touchmonitor and Cables ...................................................................................................13
Step 1-Routing the Cables...............................................................................................................14
Step 2-Connecting the Video Cables................................................................................................15
Step 3-Connecting the Serial or USB Touchscreen Cable................................................................... 16
Step 4-Connecting the Speaker Cable..............................................................................................17
Tilt Lock Function..................................................................................................................19
Optimizing the LCD Display ....................................................................................................... 19
VESA Mount on Your Touchmonitor...........................................................................................20
Rear Mount Template.............................................................................................................21
Front Mount Template............................................................................................................21
Front Mount for Horizontal Surface....................................................................................... 22
Mounting the Base..................................................................................................................23
Installing the Driver Software.....................................................................................................25
Installing the Serial Touch Driver for Windows XP, Windows 20001, Me, 95/98 and NT 4.0
................................................................................................................................................26
Installing the Serial Touch Driver for MS-DOS and Windows 3.1........................................ 27
Installing the USB Touch Driver.................................................................................................28
Installing the USB Touch Driver for Windows XP, Windows 20002, Me and 98..................28
CHAPTER 3 - OPERATION........................................................................................................29
About Touchmonitor Adjustments ...............................................................................................29
Elo Entuitive Touchmonitor User Guide 4

Using the On-Screen Display (OSD) Menus ............................................................................... 29
Side Bezel Buttons..................................................................................................................30
OSD Menu Function – DVI-I Only........................................................................................31
OSD Menu Function – Analog VGA Only.............................................................................32
CHAPTER 4 - TROUBLESHOOTING.......................................................................................33
Solutions to Common Problems ..................................................................................................33
APPENDIX A - NATIVE RESOLUTION...................................................................................35
APPENDIX B - TOUCHMONITOR SAFETY...........................................................................37
Care and Handling of Your Touchmonitor..................................................................................38
APPENDIX C - TECHNICAL SPECIFICATIONS...................................................................39
Compatible Video Modes ............................................................................................................39
Touchmonitor Specifications.......................................................................................................41
19 « LCD Touchmonitor (ET192XL-XXWA-1) Dimensions........................................................44
REGULATORY INFORMATION ................................................................................................47
WARRANTY.................................................................................................................................49
Elo Entuitive Touchmonitor User Guide
5

Elo Entuitive Touchmonitor User Guide
6

Elo Entuitive Touchmonitor User Guide
7
CHAPTER
INTRODUCTION
Congratulations on your purchase of an Elo TouchSystems Entuitive
touchmonitor. Your new touchmonitor combines the reliable performance of Elo’s
touch technology with the latest advances in LCD display design. This
combination of features creates a natural flow of information between a user and
your touchmonitor.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user’s manual to maximize the life of your unit. See Appendix B for more
information on touchmonitor safety.
About the Product
Your LCD Desktop Touchmonitor is a 19” XGA TFT color display with the
following features:
•Direct analog RGB input
•19” diagonal screen size
•16.7 million displayable colors
•1280 x 1024 resolution
•SXGA/XGA/ SVGA/ VGA/VESA/ Mac compatible
•31kHz~80 horizontal scan
•56~75Hz refresh rate

Elo Entuitive Touchmonitor User Guide
8
•Auto adjustment capability in analog mode
•High quality full screen re-scaling
•Multilingual OSD menus in 11 languages: English, French, German,
Spanish, Italian, Swedish, Finnish, Danish, Portuguese, Dutch and
Japanese
•Serial or USB touch interface (USB requires Windows 98 SE, 2000, Me
and XP.)
•Built in speakers with volume control thorough OSD
•Patented touch technology of Elo TouchSystems
•VESA DDC 1/2B data communication
•VESA DPMS power saving
•Stand with minimum 95° angle of tilt.
•Cable management device
•VESA flat panel monitor physical mounting interface (M4x 100mm)
•OSD and Power button lockouts
•Wall mountable with existing stand
•VESA 100 mm M5 threaded holes on bottom of stand for securing to
desk or other surface, i.e. table top
•Cable strain reliefs for all cables
For full Product Specifications refer to Appendix C.

CHAPTER
INSTALLATION AND SETUP
This chapter discusses how to install your LCD touchmonitor and how to install
Elo TouchSystems driver software.
Unpacking Your Touchmonitor
Check that the following 10 items are present and in good condition:
LCD Display
OR
USB touchscreen cable Serial cable
User Guide on CD,
Quick Install Guide,
and software on CD
Analog video cable DVI-D video
US power cable European power cable
Elo Entuitive Touchmonitor User Guide
9

Elo Entuitive Touchmonitor User Guide
10
Speaker cable Composite cables
S-video cable

Product Overview
Side View
Elo Entuitive Touchmonitor User Guide
11

Elo Entuitive Touchmonitor User Guide
12

Touch Interface Connection
Figure 2.1 Touchmonitor and Cables
Figure 2.2 Touchmonitor Connections (Serial and USB)
Elo Entuitive Touchmonitor User Guide
13

The following table indicates the LED status options for the Touch LED.
LED Status On
LED Status Off LED Status Blinking
Contact Elo Support
Contact Elo Support OK
Step 1-Routing the Cables
• The cables are routed through the cable management channel in the stand.
Elo Entuitive Touchmonitor User Guide
14

Step 2-Connecting the Video Cables
•Tilt the screen up and back to access the connection ports.
•Connect the 15-pin video cable (the ferrite bead end), the 24-pin DVI-D
cable, the RCA or the S-Video cable to the video port on your PC.
•Connect the other end of the video cable to the video connector on your
touchmonitor by routing the cable through the hole in the stand.
•Secure the cable to your touchmonitor and PC by turning the screws on
the connector clockwise.
•Place the cable in the cable management clip.
Elo Entuitive Touchmonitor User Guide
15

Step 3-Connecting the Serial or USB Touchscreen Cable
•Connect the female end of the serial (RS-232) cable to the serial port on
the back of your PC, or connect the USB touchscreen cable to the USB
touchscreen connector on the back of your touchmonitor.
•Connect the male end of the cable to the serial touchscreen connector
on your touchmonitor, or connect the other end of the USB touchscreen
cable to your PC.
•Secure the cable to your touchmonitor and PC by turning the screws on
the connector.
•Route the cable through the cable management clip.
Elo Entuitive Touchmonitor User Guide
16

Step 4-Connecting the Speaker Cable
NOTE: The monitor is equipped with both AC and DC power connectors. The monitor is shipped
with only an AC power cable.
•Depending on where you live, you will use either the European
or US/Canadian power cable.
•Connect the female end of the power cable to the power port on
the touchmonitor.
•Route the cable through the cable management clip.
Elo Entuitive Touchmonitor User Guide
17

Elo Entuitive Touchmonitor User Guide
18
NOTE: To protect your equipment against risk of damage from electrical surges in the power
line, plug the touchmonitor’s power cord into a surge protector, and then connect the
surge protector to a grounded AC electrical outlet.

Tilt Lock Function
You are able to lock the monitor in a desired position.
•Pivot the monitor to the desired position.
•Rotate the knob one full turn clockwise to lock the monitor in position.
•Rotate the knob one full turn counter-clockwise to unlock the monitor
from its position.
Figure 2.3 Tilt Lock Function
Optimizing the LCD Display
To ensure the LCD display works well with your computer,
configure the display mode of your graphic card to make it less
than or equal to 1280 x 1024 resolution, and make sure the
timing of the display mode is compatible with the LCD display.
Refer to Appendix A for more information about resolution.
Compatible video modes for your touchmonitor are listed in
Appendix C.
Elo Entuitive Touchmonitor User Guide
19

VESA Mount on Your Touchmonitor
Figure 2.4 Stand and Display Separation
NOTE: The above drawing displays the VESA mounting interface after the removal of the
mounting cover and base.
NOTE: You will need a 3mm Hex Wrench for the following steps.
•Remove the four screws in order to separate the stand from the monitor
(see Figure 2.4).
•Rotate the monitor 180° (ensuring the monitor will not be upside down
when mounted in the position shown).
•Reinstall the four screws.
•Route the cables through the cutout (if applicable) and mount the
monitor to the wall using the template in Figure 2.
Elo Entuitive Touchmonitor User Guide
20