Enabling Devices Let Loose Lenny User manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
-800-832-8697
[e-mail]
Let Loose Lenny #9344
USER’S GUIDE
50 Broadway
Hawthorne, NY 0532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Lenny will make you want to shout with joy! He boogies to the
song “Shout” when you press his foot or your external capability
switch (not included). You’ll want to sing and dance with this
talented king of the jungle. His wild mane is soft and can be
tamed with a small comb or soft brush for extra sensory input.
Lenny sings for 45 seconds or until you press the switch again.
Size: 9"L x 8"W x 3½"H. Requires 3 AA Batteries. Weight: lb.
peration:
. Lenny requires 3 AA batteries (Not included) to operate.
Use alkaline batteries only (e.g. Duracell or Energizer
brand). Do not use rechargeable batteries or any other type
of batteries because they supply lower voltage and the unit
will not perform properly. Never mix old and new batteries
together or different brands or types together.
2. The battery compartment is located on the bottom of Lenny,
under the Velcro flap. Using a Phillips head screwdriver
open and remove the batter cover. Next install 3 AA
batteries paying close attention to proper battery polarity.
3. Replace the battery compartment cover and secure it with
the screw. Set the ON/OFF switch to ON.
4. Connect Lenny to any external capability switch (not
included) via the jack located at the end of his cord. Lenny is
equipped with a /8" jack for use with external capability
switches with a /8" plug. Make sure you have pushed the
switch plug all the way in. There should be no gaps.
5. Actuate your external capability switch or squeeze Lenny’s
Musical Note (foot) and he boogies to the song “Shout” when
you press his foot or your external capability switch (not
included)
Troubleshooting:
Problem: Lenny does not function correctly.
Action #1: Replace the batteries paying close attention to
proper battery polarity.
Action #2: Make sure that the connection between the external
capability switch is pushed in all the way. There should be NO
gaps.
Action #3: Try your switch with another switch operated
toy/device in an effort to rule out your switch as the source of
the problems.
Care of Unit:
If you will not be using Lenny for an extended amount of time,
we recommend removing the batteries.
Do not submerge the unit in water, as it will damage the
electrical components. Lenny is surface washable only.
Rev 3/8/2022