Enabling Devices St. Bernard Puppy User manual

St. Bernard Puppy #437
USER’S GU DE

Bow Wow!
Take your St. Bernard Puppy for a walk. He walks forward and
backwards, and wags his tail while barking. He is a wonderful pet to
have, so soft and cuddly. Size: 8 ½ "L x 4 ½ "W x 7"H. Requires 2 AA
Batteries.
Operation:
. St. Bernard Puppy requires 2 AA Batteries to operate. Alkaline
batteries must be used (e.g. Duracell or Energizer Brands). Do not
use rechargeable batteries because they supply a lower voltage and
the unit may not perform as well. Never mix old and new batteries
together or different brands or types together.
2. Turn St. Bernard Puppy upside down to reveal the battery
compartment. Remove the small screw with a Phillips Head
screwdriver. Install 2 AA batteries paying close attention to proper
battery polarity. Replace the battery compartment cover and screw.
3. Connect St. Bernard Puppy to any external capability switch (not
included) via the jack located at the end of St. Bernard Puppy’s
cord. St. Bernard Puppy is equipped with a /8" jack for use with
external capability switches with a /8"plug. Make sure to make a
tight connection. There should be no gaps.
4. Actuate your external capability switch and St. Bernard Puppy will
spring to life! He walks forward, backwards, barks and wags his
tail.
5. St. Bernard Puppy will remain on while the external capability
switch continues to be actuated. Once you release the external
capability switch St. Bernard Puppy will turn off.
Troubleshooting:
Problem: St. Bernard Puppy does not function correctly.
Action #1: Replace the batteries paying close attention to proper (+) &
(-) battery polarity.
Action #2: Make sure that the connection between the external
capability switch and the jack is TIGHT. There should be NO gaps.
Action #3: Try your switch with another switch operated toy/device in
an effort to rule out your switch as the source of the problems.
Care of Unit:
• Do not inhibit St. Bernard Puppy’s movement, as this may cause
irreversible damage.
• Do not lift St. Bernard Puppy up by his head, tail or legs, or drop
St. Bernard Puppy.
• If you will not be using St. Bernard Puppy for an extended amount
of time, we recommend removing the batteries.
Do not submerge the unit in water, as it will damage the electrical
components. St. Bernard Puppy is surface washable only.
Rev 8/11/10