Create a soothing ambiance with our mini aquarium. It lights up and the
fish swim about when you press and hold your switch. Works with or
without a switch. Size: 6½"L x 2"W x 4¼"H. Requires 3 AA Batteries.
Weight: ¼ lb.
Operation:
Operation:Operation:
Operation:
1. The Aquarium requires 3 AA batteries. Use alkaline batteries
only (e.g. Duracell or Energizer brand . Do not use rechargeable,
heavy-duty or any other type of batteries because they supply
lower voltage and the unit will not perform properly. Never mix
old and new batteries together or different brands or types
together.
2. To install the batteries, carefully turn the unit to reveal the
battery compartment. Using a Phillips head screwdriver remove
the battery cover and screw, next install 3 AA batteries into the
compartment. Please note to follow proper (+ & (- battery
polarity. Replace cover and screw.
3. Fill the tank with distilled water by removing the cap on the top
of the tank, replace cap when done filling.
4. Next plug in your external capability switch into the female 1/8"
jack, located in the side of the Aquarium. If your switch has a ¼"
male plug, then order one of our #1170 ¼" to 1/8" adapters.
Make sure the male plug is pushed all the way into the jack,
there should be no gaps. Set the Aquarium’s Power switch to
OFF. You now can activate this toy with your switch.
5. When you activate your switch the Aquarium will turn the lights
on and move the fish around the tank. Once you release your
switch all functions will stop.
6. The Aquarium can also be used without a switch by simply
turning the power switch to ON. The Aquarium will then run
continually. If you plug a switch into the switch jack while the
Aquarium is running it will turn the power OFF, you will then need
to activate the switch for the Aquarium to run.
Troublesho
TroubleshoTroublesho
Troubleshooting:
oting:oting:
oting:
Problem:
Problem:Problem:
Problem: The Aquarium does not turn on when switch is depressed.
Action #1:
Action #1:Action #1:
Action #1: Make sure that you press all connections firmly together.
Any gaps may interrupt electrical connection. The ON/OFF switch needs
to be set to OFF
OFFOFF
OFF.
Action #2:
Action #2:Action #2:
Action #2: Make sure batteries are fresh.
Action #3:
Action #3:Action #3:
Action #3: Try a different switch with your Aquarium to rule out the
Aquarium as the source of the problem.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
The Aquarium can be wiped clean with any mild household multi-
purpose, non-abrasive cleaner and disinfectant. We recommend Simple
Green, which is a non-toxic biodegradable all-purpose cleaner.
Do not submerge
Do not submergeDo not submerge
Do not submerge the unit in any fluids, as it will damage the contents
and the electrical components.
Do not use abrasive cleaners
Do not use abrasive cleanersDo not use abrasive cleaners
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Rev 4/5/17
Rev 4/5/17Rev 4/5/17
Rev 4/5/17
